American Standard CADET 3 RIGHT HEIGHT 3305.000 User manual

Brand: American Standard

Model: CADET 3 RIGHT HEIGHT 3305.000

Type: User manual

This manual is also suitable for

Cadet 3305.000

CADET

3 RIGHT HEIGHT™ ELONGATED

COMPLETE with the FLUSH RIGHT™ SYSTEM

VITREOUS CHINA

5/06

CADET

3 RIGHT HEIGHT™

ELONGATED COMPLETE TOILET with the

FLUSH RIGHT™ SYSTEM

❏ 3305.000

• Vitreous china

• Low-consumption (6.0 Lpf/1.6 gpf)

• EverClean™ anti-microbial ceramic glaze

• Featuring the Flush Right™ System

• 16-1/2" rim height for accessible application

• Elongated siphon action jetted bowl

• Fully-glazed 2-1/8" trapway with 2" ball pass

• Generous 9" x 8" water surface area

• Close-coupled tank with at tank cover for

superior storage

• Oversized 3" ush valve with chemical

resistant apper

• Chrome trip lever

• New Speed Connect™ tank-to-bowl

coupling system

• New sanitary dam on bowl with four point

tank stabilization

• Color matched solid plastic seat with cover

• 2 color-matched bolt caps

• Wax ring gasket with closet bolts

• 100% factory ush tested

Nominal Dimensions:

30-1/4" x 17-1/4" x 30-1/4"

(768 x 438 x 768mm)

Compliance Certications -

Meets or Exceeds the Following Specications:

• ASME A112.19.2M for Vitreous China Fixtures -

includes Flush Performance, Ball Pass Diameter,

Trap Seal Depth and all Dimensions

• Los Angeles Department of Water and

Power Supplementary Purchase Specication

for Non-Adjustability

To Be Specied:

❏ Color: ❏ White ❏ Bone

❏ Supply with stop:

FINISHED WALL

FINISHED

FLOOR

C/L OF OUTLET

SUPPLY

REQ'D.

216mm

(8-1/2)

768mm

(30-1/4)

25mm ± 6mm

(1 ± 1/4)

102mm

(4)

464mm

(18-1/4)

438mm

(17-1/4)

768mm

(30-1/4)

419mm

(16-1/2)

*203mm

(8)

305mm

(12)

356mm

(14)

213mm

(8-3/8)

C/L OF SEAT POST HOLES

140mm (5-1/2 CENTERS)

*352mm

(13-7/8)

*152mm

(6)

238mm

(9-3/8)

NOTES:

THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF

305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.

SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED

SEPARATELY.

DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range

of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility is

assumed for use of superseded or voided page

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES

AND ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND

USEABLE BUILDING FACILITIES-CHECK LOCAL CODES.

INSTALL WITH SEAT AT HEAD END.

American Standard CADET 3 RIGHT HEIGHT 3305.000 User manual

Brand: American Standard

Model: CADET 3 RIGHT HEIGHT 3305.000

Type: User manual

This manual is also suitable for

Cadet 3305.000

Download PDF

report

American Standard CADET 3 RIGHT HEIGHT 3305.000 User manual

This manual is also suitable for

American Standard CADET 3 RIGHT HEIGHT 3305.000 User manual

Related papers