DECLARATION OF CONFORMITY
Avaya declares that the following products:
1210, 1220, 1230 IP Phone Sets and Key Expansion Modules (KEMs)
conform with the Radio & Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC.
The products referenced above conform to the applicable harmonized standards as outlined under
the R&TTE Directive as follows:
EN 60950-1:2006 + A11 - ITE Safety - Part 1: General Requirements
EN 55022:1998 + A1 + A2 Class B - Radiated Disturbance
EN 61000-3-2: 2000
EN 61000-3-3: 1995 + A1
EN 55024:1998 + A1 + A2 - Immunity
The 12xx series of IP Phone Sets
are manufactured at Avaya’s Contract Manufacturer – LG_E
located in Thailand.
Ian Hawes, B.Eng., M.Eng. P.Eng.,
Regulatory Compliance Manager
Enterprise Collaboration Solutions
Avaya
Belleville, June 01 2012
_____________________________ ________________________
Name and Signature of Manufacturer Place and Date of Issue
Avaya
250 Sidney Street
Belleville, Ontario
Canada
K8P 3Z3
Tel: 613-967-5545
Email: [email protected]
/
