Haws 1109FR User guide

Brand: Haws

Model: 1109FR

Type: User guide

07/15 Model 1109FR/1109FRBP Page 1 of 4

No. 2076626(12)

1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424

E-mail: [email protected] website: www.hawsco.com

Model 1109FR/1109FRBP

Drinking Fountain

INSTALLATION, OPERATION

MAINTENANCE INSTRUCTIONS

LIMITED WARRANTY

HAWS warrants that this specific product is guaranteed against defective material

or poor workmanship for a period of one year from date of shipment. HAWS

liability under this warranty shall be discharged by furnishing without charge F.O.B.

HAWS Factory any goods, or part thereof, which shall appear to the Company upon

inspection to be of defective material or not of first class workmanship, provided

that claim is made in writing to Haws within a reasonable period after receipt of the

product. Where claims for defects are made, the defective part or parts shall be

delivered to the Company, prepaid, for inspection. HAWS will not be liable for the

cost of repairs, alterations or replacements, or for any expense connected therewith

made by the owner or his agents, except upon written authority from HAWS,

Sparks, Nevada. HAWS will not be liable for any damages caused by defective

materials or poor workmanship, except for replacements, as provided above. Buyer

agrees that HAWS shall not be liable for general, special, or consequential

damages claimed to arise under the contract of sale. The drinking fountain

manufactured by HAWS is warranted to function if installation and maintenance

instructions provided are adhered to. The units also must be used for the purpose

for which they were intended.

NO OTHER WARRANTIES EXPRESSED OR IMPLIED ARE AUTHORIZED,

PROVIDED OR GIVEN BY HAWS.

NOTE TO INSTALLER: Please leave this information with the Maintenance Department.

SHOULD YOU EXPERIENCE DIFFICULTY WITH THE INSTALLATION OF THIS

MODEL PLEASE CALL:

TECHNICAL SUPPORT: 1-800-766-5612

FOR CUSTOMER SERVICE: 1-888-640-4297

07/15 Model 1109FR/1109FRBP Page 2 of 4

RECOMMENDED TOOLS: Hack saw, pipe joint sealant, screwdriver, level, 12" adjustable

wrench, 10" pipe wrench, 5/64“ hex key wrench, 9/16”, 1/2", 7/16” socket wrench or open

end wrench.

LOCATION OF UNIT: The Model 1109FR/1109FRBP Drinking Fountain is a wheelchair

accessible drinking water facility. The height dimensions shown, meet current ADA

requirements. When installing this unit, local, state or federal codes should be adhered to.

If height other than shown is required, then dimensions must be adjusted accordingly.

SUPPLY LINE: The minimum recommended line size is 1/2“IPS with 30-90 psi (2-6 ATM)

flowing pressure. Where sediment or mineral content is a problem, an inlet filter is

recommended.

PLUMBING CONNECTIONS: Waste outlet is 1-1/4” IPS (located on 6521FR Valve box).

MAINTENANCE: Periodically clean the strainer. Refer to 6521FR Valve Operation and

Maintenance Sheet for more information.

TROUBLESHOOTING

PROBLEM

REPAIR CHECKLIST

1. Insufficient bubbler flow. 1a. Check that inlet screwdriver stop valve

is wide open. (Customer supplied).

Turn counterclockwise.

b. Verify minimum 30psi flowing supply

pressure.

c. Adjust valve to increase flow. Use

front adjust screw see 6521FR Valve

Manual.

General Notes:

Before tightening nut and ferrule assembly, push tubing into fitting until it bottoms out

to ensure correct engagement with O-Ring.

For more information about Haws products, see our website: www.hawsco.com

HAWS

and other trademarks used

in these materials are the exclusive property of Haws Corporation.

OPTIONAL ON 1109FR

PARTS BREAKDOWN

BACK PANEL

BUBBLER HEAD

PUSH BTN ASS'Y

BOTTOM PLATE

FREEZE RESISTANT VALVE

STANDARD ON 1109FRBP

DETAIL OF ITEM 2

ROTATED 90° INTO VIEW

DETAIL A

(OPTIONAL)

FOR REMOVAL

OF NOZZLE

WITH TUBE

DRIVER, NOZZLE .25 HEX

APPROVED

DRAWN

PART NUMBER

DRAWING NO.

SCALE:

SHEET OF

REV

DRAWING TYPE:

SIZE: A

BYECN NO.

PAGE

DATE

ECN:

REVISED PER

CHKD

HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: HAWS@HAWSCO.COM

WEBSITE: WWW.HAWSCO.COM

ITEM DESCRIPTION

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS

MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

WHEN ORDERING PARTS PLEASE SPECIFY MODEL NUMBER.

PART NO.

06/08/98

A12

0002076626

1109FR/1109FRBP

1:4

ADM

07/21/15

3 of 4

PARTS BREAKDOWN

5013

2015

0002082253

6521FR

PBM1109

5881PBA

5703M

BP3

HEIGHT

HANDICAP

ROUGH-IN

BOX

DEPTH

102mm

51mm

SUPPLY

514mm

*20-1/4"

876mm

*34-1/2"

152mm

WALL FACE

FLOOR LINE

WASTE

565mm

*22-1/4"

305mm

12"

457mm

18"

2-1/8"

54mm

SUPPLIED)

SUPPLY (NOT

1/2" IPS

SUPPLIED)

WASTE (NOT

1-1/4" IPS

SUPPLY

FREEZE PROTECTED

AIR LINE

76mm

254mm

10"

438mm

*17-1/4"

356mm

14"

SLOTS

MOUNTING

9.5mm

3/8"

TO FLOOR

697mm

27-7/16"

3-1/4"

83mm83mm

3-1/4"

WASTE

130mm

5-1/8"

686mm

*27"

MOUNTING DETAIL

1-1/4" O.D. WASTE W/1-1/4

SLIP JOINT NUT AND WASHER

(FROM DRINKING FOUNTAIN)

1-1/4" IPS NIPPLE (NOT SUPPLIED)

1-1/4 NPT (F)

ELBOW TO TRAP

SUPPLY

76mm

229mm

15"

381mm

BACK PANEL OPTIONAL ON 1109FR

1/2"

12.7mm

(W/OPT BACK PANEL)

76mm

SUPPLY

AIR LINE

BACK PANEL STANDARD ON 1109FRBP

6521FR

VALVE

SYSTEM

(TO SPOUT OUTLET)

DIMENSIONS MARKED (*) MUST BE ADJUSTED

INSTALLATION HEIGHTS OTHER THAN SHOWN,

FEDERAL CODES SHOULD BE ADHERED TO. FOR

WHEN INSTALLING THIS UNIT LOCAL, STATE OR

HOLD ROUGH-IN DIMENSIONS ± 1/4" (6.4mm).

ACCORDINGLY.

3/8 OD VINYL SUPPLY TUBING (CONNECT

TO BUBBLER WITH SUPPLIED UNION, TRIM

TO FIT)

7/8 OD INSULATING TUBING (MUST

COVER ENTIRE SUPPLY TUBING, FROM

BUBBLER TO MODEL 6521FR FREEZE VALVE

ASSEMBLY,TRIM TO FIT)

6521FR FREEZE

RESISTANT VALVE

ASSEMBLY

1-1/4" O.D. X 7 1/2 LG."

WASTE ARM (SUPPLIED)

6521 VALVE ASSEMBLY

ACCESS PANEL

THIS FOUNTAIN REQUIRES THE USE OF MODEL

6521FR FREEZE RESISTANT VALVE ASSEMBLY

(SOLD SEPARATELY)

VALVE ASSEMBLY MUST BE INSTALLED IN A

WARM AREA. PROVISIONS SHOULD BE MADE

TO ALLOW ACCESS TO ACCESS PANEL

3/8 MOUNTING

HARDWARE (BY

OTHERS).

(SUPPLIED WITH

6521 FREEZE VALVE)

12.7mm

MOUNTING PLATE

(MODEL 6700, OPTIONAL)

SEE DETAIL A

DETAIL A

APPROVED:

DRAWN:

PART NUMBER

DRAWING NO.

SCALE: SHEET OF

REV

DRAWING TYPE: SIZE: A

BY:ECN NO.

DATE:

ECN:

REVISED PER

CHK'D.:

HAWS and other trademarks used in these materials are the exclusive property of Haws Corporation.

MODEL(S)

1455 KLEPPE LANE

SPARKS, NEVADA 89431

(775) 359-4712 FAX (775) 359-7424

E-MAIL: [email protected]

WEBSITE: WWW.HAWSCO.COM

THIS DOCUMENT IS TRUE AND CORRECT AT TIME OF PUBLICATION. CONTINUED PRODUCT IMPROVEMENTS

MAKE SPECIFICATIONS AND MEASUREMENTS SUBJECT TO CHANGE WITHOUT NOTICE.

06/98

A 12

0002076626.D

1109FR/1109FRBP

1:16

1 1

07/21/15

INSTALLATION

5013

2015

Haws 1109FR User guide

Haws 1109FR User guide

Related papers

Other documents