670-100-101
Issue 2
March 2004
Avaya SG203 and SG208
Security Gateway
Hardware Installation Guide
Copyright 2004, Avaya Inc.
All Rights Reserved
Notice
Every effort was made to ensure that the information in this
document was complete and accurate at the time of release.
However, information is subject to change.
Warranty
Avaya Inc. provides a limited warranty on this product. Refer
to your sales agreement to establish the terms of the limited
warranty. In addition, Avaya’s standard warranty language as
well as information regarding support for this product, while
under warranty, is available through the following website:
http://www.avaya.com/support
Preventing Toll Fraud
“Toll fraud” is the unauthorized use of your
telecommunications system by an unauthorized party (for
example, a person who is not a corporate employee, agent,
subcontractor, or is not working on your company's behalf).
Be aware that there may be a risk of toll fraud associated with
your system and that, if toll fraud occurs, it can result in
substantial additional charges for your telecommunications
services.
Avaya Fraud Intervention
If you suspect that you are being victimized by toll fraud and
you need technical assistance or support, in the United
States and Canada, call the Technical Service Center's Toll
Fraud Intervention Hotline at 1-800-643-2353.
Disclaimer
Avaya is not responsible for any modifications, additions or
deletions to the original published version of this
documentation unless such modifications, additions or
deletions were performed by Avaya. Customer and/or End
User agree to indemnify and hold harmless Avaya. Avaya’s
agents, servants and employees against all claims, lawsuits,
demands and judgements arising out of, or in connection
with, subsequent modifications, additions or deletions to this
documentation to the extent made by the Customer or End
User.
How to Get Help
For additional support telephone numbers, go to the Avaya
Web site: http://www.avaya.com/support/. If you are:
• Within the United States, click Escalation Management
link. Then click the appropriate link for the type of support
you need.
• Outside the United States, click Escalation Management
link. Then click International Services link that includes
telephone numbers for the International Centers of
Excellence.
Providing Telecommunications Security
Telecommunications security (of voice, data, and/or video
communications) is the prevention of any type of intrusion to
(that is, either unauthorized or malicious access to or use of)
your company's telecommunications equipment by some
party.
Your company's “telecommunications equipment” includes
both this Avaya product and any other voice/data/video
equipment that could be accessed via this Avaya product
(that is, “networked equipment”).
An “outside party” is anyone who is not a corporate
employee, agent, subcontractor, or is not working on your
company's behalf. Whereas, a “malicious party” is anyone
(including someone who may be otherwise authorized) who
accesses your telecommunications equipment with either
malicious or mischievous intent.
Such intrusions may be either to/through synchronous (time-
multiplexed and/or circuit-based) or asynchronous
(character-, message-, or packet-based) equipment or
interfaces for reasons of:
• Utilization (of capabilities special to the accessed
equipment)
• Theft (such as, of intellectual property, financial assets, or
toll-facility access)
• Eavesdropping (privacy invasions to humans)
• Mischief (troubling, but apparently innocuous, tampering)
• Harm (such as harmful tampering, data loss or alteration,
regardless of motive or intent)
Be aware that there may be a risk of unauthorized intrusions
associated with your system and/or its networked equipment.
Also realize that, if such an intrusion should occur, it could
result in a variety of losses to your company (including but
not limited to, human/data privacy, intellectual property,
material assets, financial resources, labor costs, and/or legal
costs).
Responsibility for Your Company’s Telecommunications
Security
The final responsibility for securing both this system and its
networked equipment rests with you - Avaya’s customer
system administrator, your telecommunications peers, and
your managers. Base the fulfillment of your responsibility on
acquired knowledge and resources from a variety of sources
including but not limited to:
• Installation documents
• System administration documents
• Security documents
• Hardware-/software-based security tools
• Shared information between you and your peers
• Telecommunications security experts
To prevent intrusions to your telecommunications equipment,
you and your peers should carefully program and configure:
• Your Avaya-provided telecommunications systems and
their interfaces
• Your Avaya-provided software applications, as well as
their underlying hardware/software platforms and
interfaces
• Any other equipment networked to your Avaya products.
TCP/IP Facilities
Customers may experience differences in product
performance, reliability and security depending upon network
configurations/design and topologies, even when the product
performs as warranted.
Standards Compliance
Avaya Inc. is not responsible for any radio or television
interference caused by unauthorized modifications of this
equipment or the substitution or attachment of connecting
cables and equipment other than those specified by Avaya
Inc. The correction of interference caused by such
unauthorized modifications, substitution or attachment will be
the responsibility of the user. Pursuant to Part 15 of the
Federal Communications Commission (FCC) Rules, the user
is cautioned that changes or modifications not expressly
approved by Avaya Inc. could void the user’s authority to
operate this equipment.
Product Safety Standards
This product complies with and conforms to the following
international Product Safety standards as applicable:
• Safety of Information Technology Equipment, IEC 60950,
3rd Edition including all relevant national deviations as
listed in Compliance with IEC for Electrical Equipment
(IECEE) CB-96A.
• Safety of Information Technology Equipment, CAN/CSA-
C22.2 No. 60950-00 / UL 60950, 3rd Edition
• Safety Requirements for Customer Equipment, ACA
Technical Standard (TS) 001 - 1997
• One or more of the following Mexican national standards,
as applicable: NOM 001 SCFI 1993, NOM SCFI 016
1993, NOM 019 SCFI 1998
Electromagnetic Compatibility (EMC) Standards
This product complies with and conforms to the following
international EMC standards and all relevant national
deviations:
Limits and Methods of Measurement of Radio Interference of
Information Technology Equipment, CISPR 22:1997 and
EN55022:1998.
Information Technology Equipment – Immunity
Characteristics – Limits and Methods of Measurement,
CISPR 24:1997 and EN55024:1998, including:
• Electrostatic Discharge (ESD) IEC 61000-4-2
• Radiated Immunity IEC 61000-4-3
• Electrical Fast Transient IEC 61000-4-4
• Lightning Effects IEC 61000-4-5
• Conducted Immunity IEC 61000-4-6
• Mains Frequency Magnetic Field IEC 61000-4-8
• Voltage Dips and Variations IEC 61000-4-11
• Powerline Harmonics IEC 61000-3-2
• Voltage Fluctuations and Flicker IEC 61000-3-3
Federal Communications Commission Statement
Part 15:
Canadian Department of Communications (DOC)
Interference Information
This Class A digital apparatus complies with Canadian ICES-
003.
Cet appareil numérique de la classe A est conforme à la
norme NMB-003 du Canada.
This equipment meets the applicable Industry Canada
Terminal Equipment Technical Specifications. This is
confirmed by the registration number. The abbreviation, IC,
before the registration number signifies that registration was
performed based on a Declaration of Conformity indicating
that Industry Canada technical specifications were met. It
does not imply that Industry Canada approved the
equipment.
DECLARATIONS OF CONFORMITY
United States FCC Part 68 Supplier’s Declaration of
Conformity (SDoC)
Avaya Inc. in the United States of America hereby certifies
that the equipment described in this document and bearing a
TIA TSB-168 label identification number complies with the
FCC’s Rules and Regulations 47 CFR Part 68, and the
Administrative Council on Terminal Attachments (ACTA)
adopted technical criteria.
Note: This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own
expense.
Avaya further asserts that Avaya handset-equipped terminal
equipment described in this document complies with
Paragraph 68.316 of the FCC Rules and Regulations
defining Hearing Aid Compatibility and is deemed compatible
with hearing aids.
Copies of SDoCs signed by the Responsible Party in the U.
S. can be obtained by contacting your local sales
representative and are available on the following Web site:
http://www.avaya.com/support
All Avaya media servers and media gateways are compliant
with FCC Part 68, but many have been registered with the
FCC before the SDoC process was available. A list of all
Avaya registered products may be found at:
http://www.part68.org/
by conducting a search using “Avaya” as manufacturer.
European Union Declarations of Conformity
Avaya Inc. declares that the equipment specified in this
document bearing the “CE” (Conformité Europeénne) mark
conforms to the European Union Radio and
Telecommunications Terminal Equipment Directive (1999/5/
EC), including the Electromagnetic Compatibility Directive
(89/336/EEC) and Low Voltage Directive (73/23/EEC). This
equipment has been certified to meet CTR3 Basic Rate
Interface (BRI) and CTR4 Primary Rate Interface (PRI) and
subsets thereof in CTR12 and CTR13, as applicable.
Copies of these Declarations of Conformity (DoCs) can be
obtained by contacting your local sales representative and
are available on the following Web site:
http://www.avaya.com/support
Japan
This is a Class A product based on the standard of the
Voluntary Control Council for Interference by Information
Technology Equipment (VCCI). If this equipment is used in a
domestic environment, radio disturbance may occur, in which
case, the user may be required to take corrective actions.
China
BMSI (Chinese Warning Label)
Hardware, including technical data, is subject to U.S. export
control laws, including the U.S. Export Administration Act and
its associated regulations, and may be subject to export or
import regulations in other countries. Customer agrees to
comply strictly with all such regulations and acknowledges
that it has the responsibility to obtain licenses to export, re-
export, or import hardware.
Environmental Health and Safety:
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to Avaya Environmental
Health and Safety guidelines.
Documentation:
For the most current versions of documentation, go to the
Avaya support Web site: http://www.avaya.com/support/
WARNING:
!
5
Table of Content
About this book 7
Contacting Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Chapter 1 Introduction 9
Functional overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Additional features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
VPNmanager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Plug-and-Play installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Hardware components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Ethernet ports. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Chapter 2 Installing SG203 and SG208 Security Gateway 15
Site requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Environmental requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Site power considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Equipment requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Physical installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Required tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Safety recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Desktop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Rackmount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Overview of front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Console port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19
Multi-interface ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Connecting the SG203/SG208 security gateway to the network . . . . . . . . . . . . . .20
Chapter 3 Setting up the security gateway for configuration 23
Connecting to the private port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Performing the quick setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Index 29
6
Avaya SG203/SG208 Security Gateway Hardware Installation Guide
March 2004 About this book 7
About this book
The Avaya SG203 and SG208 Security Gateways are dedicated
hardware-based network security devices designed to provide overlay
security on an IP data network.
This guide describes the Avaya SG203 and SG208 Security Gateway
and how to install and preconfigure these devices. It is recommended that
you read the entire installation guide before installing the security
gateway.
Contacting Technical Support
Technical support is available to registered users of the Avaya security
gateway products.
Domestic support
• Toll free phone support: (866) 462-8292 (24x7)
• Email: vpnsupport@avaya.com
• Web: http://www.support.avaya.com
International support
• For regional support numbers, go to http://www.avayanetwork.com/
site/GSO/defaut.htm
8 About this book March 2004
Avaya SG203/SG208 Security Gateway Hardware Installation Guide
Documentation
The security gateway documentation includes both the Hardware
Installation Guide and the Security Gateway Configuration Guide for
VPNos. You can down load these guides from
http://www.support.avaya.com. Navigate to Product Documentation, VPN
and Security.
March 2004 Introduction 9
Chapter 1 Introduction
The Avaya SG203 and SG208 Security Gateways are high-performance
integrated firewall, security zone, and IPSec VPN gateway devices. They
are designed to provide the high capacity, scalability and reliability
required by your networks for IPSec/firewall services in one unit or
multiple units for enterprise headquarter locations requiring a rack
mountable device.
The security gateway is easy to configure and can either be managed
locally from the Web interface or remotely using Avaya VPNmanager™.
10 Introduction March 2004
Avaya SG203/SG208 Security Gateway Hardware Installation Guide
Figure 1 Typical SG203/SG208 security gateway installation
Functional overview
The SG203 and SG208 security gateways are dedicated hardware-based
network security devices designed to provide overlay security services on
an IP data network. The security gateway sits behind an edge router and
has auto-detecting ethernet interfaces on the public and private ports.
The security gateway’s primary function is to perform IPSec and firewall
security services to protect enterprise networks and to secure data being
sent over shared IP networks. The security gateway establishes an
Internet Key Exchange (IKE) protocol session with its IPSec peer to
perform an authentication and to negotiate the security associations
(SAs) that are used to secure the session. Once the successful
March 2004 Introduction 11
Avaya SG203/SG208 Security Gateway Hardware Installation Guide
negotiation is completed data can then be encapsulated in IPSec
tunneling packets that can only be decrypted by the peer on the other end
of the IPSec tunnel.
Additional features
VPNmanager
Avaya VPNmanager is an optional Avaya application that lets network
managers define, configure and manage VPNs from any location. Large
networks would want to use VPNmanager to do distributed managed
firewall rules as well as VPN management across the network.
Security
The SG203 and SG208 security gateway employs cryptographic
algorithms and keys powerful enough for the most sensitive business
communications to provide data stream privacy. It supports DES and
Triple DES, and AES encryption, as well as the ISAKMP key
management standard.
Table 1 Additional features
Parameter Specification
Encryption DES, Triple DES, and AES hardware encryption. DES
uses a 56-bit key. Triple DES uses three 56-bit
independent keys for an effective key length of 168 bits.
AES is a symmetric 127 bit block data encryption
technique. AES can be used in place of DES.
All weak and semi-weak keys are automatically
discarded.
Authentication Keyed MD5™ Message Digest (RFC 1321)
HMAC-MD5 and HMAC SHA-1 (RFC 2104)
Key
Management
ISAKMP (Internet Security Association Key Management
Protocol).
Supports network address translation for firewall support.
User
Authentication
CHAP, PAP
12 Introduction March 2004
Avaya SG203/SG208 Security Gateway Hardware Installation Guide
Data authenticity is assured by using HMAC-MD5™ or HMAC-SHA-1
packet signatures to reject altered or forged packets. All security
mechanisms employed by the security gateway conform to IPSec
standards, in order to provide interoperability and broaden the use of VPN
technology.
Performance
For maximum network flexibility, the SG203 security gateway supports
four 10/100BASE-T Ethernet interfaces, and the SG208 supports four 10/
100/1000BASE-T Ethernet interfaces.
When packets are encrypted and authenticated according to IPSec
protocol guidelines, additional bytes, in the form of IPSec headers, must
be added to packets. In many cases, the additional packet overhead
imposes a performance penalty in return for security. The extra bytes tend
to lengthen packets and reduce the throughput (measured in packets per
second). The overhead depends on the IPSec policy and could be up to
63 bytes.
Table 2 SG203/208 performance specifications
SG203 SG208
IKE Sessions 3000 8000
IPSec Sessions 12,000 16,000
Subnets supported 21
Firewall TCP/UDP
Sessions
200,000 300,000
VPNremote users
(Default/Max)
100/3000 100/8000
Site to Site (Default/Max) 50/300 100/1000
Protected FW/VPN
Devices
3000 8000
March 2004 Introduction 13
Avaya SG203/SG208 Security Gateway Hardware Installation Guide
Plug-and-Play installation
The auto sensing interfaces of the security gateway enables installation
into any Ethernet network. By default, the security gateway functions as a
DHCP client on the public interface and as a DHCP server on the private
interface. Immediately after receiving IP connectivity, the network
administrator can locate the security gateway via https://192.168.1.1 on
the private interface. The administrator enters the name as root and the
password as password for the user’s credentials. The quick set up guides
the network administrator through the minimal network configuration.
Hardware components
Each of the major components are shown in Figure 2 and Figure 3.
Figure 2 Front panel
Figure 3 Back panel
Expansion slot Public portPrivate port
Console RS 232 port
Multi interface ports
Ethernet activity indicator
Ethernet0 Ethernet1 Ethernet2 & 3
Expansion slotPower and On/Off switch
14 Introduction March 2004
Avaya SG203/SG208 Security Gateway Hardware Installation Guide
Table 3 Physical specifications
Ethernet ports
Etnernet0 is reserved for the Private port and Ethernet1 is reserved for
the Public port. Ethernet2 and Ethernet3 are software configurable and
can be used for fail-over, DMZ, or other functions.
Each Ethernet port has status indication LEDs that show whether the link
is active.
Parameter SG203 SG208
Dimensions 17”W x 18.5”D x 1.75”H
(46.9cm x 43.1cm x
4.4cm)
17”W x 18.5”D x 1.75”H
(46.9cm x 43.1cm x
4.4cm)
Weight 17 pounds (7.7
Kilograms)
17 pounds (7.7
Kilograms)
LAN Interface Four 10/100/Base-T
Ethernet
Four 10/100/1000Base-T
Ethernet
Management
Interface
RS-232 RS-232
March 2004 Installing SG203 and SG208 Security Gateway 15
Chapter 2 Installing SG203 and SG208
Security Gateway
This chapter provides instructions for the physical installation of the
SG203 and SG208 security gateways, including rack mounting,
placement, and connection to the network.
Site requirements
This section describes the requirements your site must meet for safe
installation and operation of the security gateway. Ensure that your site is
properly prepared before beginning installation.
Environmental requirements
The security gateway devices are intended for use in a normal office
environment. For more extreme conditions, verify that temperature,
humidity, and power conditions meet the following specifications:
• Temperature range - 32° to 104° F (0° to 40°C)
• Relative humidity - 5-95%, non-condensing
Site power considerations
Check the power at your site to ensure that you are receiving “clean”
power (free of spikes and noise). Install a power conditioner, if necessary.
16 Installing SG203 and SG208 Security Gateway March 2004
Avaya SG203/SG208 Security Gateway Hardware Installation Guide
Table 4 Electrical specifications
Equipment requirements
The security gateway devices shipping carton should contain:
To install and use the security gateway in a typical network, the customer
must supply the following:
• Router, DSL, cable or ISDN modem, providing connectivity to a WAN
such as the Internet
• A workstation on the LAN to communicate with the security gateway,
installed with a Java-enabled (JDK1.1.8 or later), 128-bit encryption-
capable browser, either Internet Explorer 5.5 or later or Netscape 6.2
or later.
Physical installation
The security gateway can be placed on a desktop or mounted in a rack. It
is easy to install and requires a screwdriver for rack mounted devices.
Voltage 100-240 VAC
Input frequency 47-63 Hz
AC input current 3.5 Amps
• 1
Security Gateway
• 2
Cat5e cables
• 1
Power supply
• 1
Null modem cable for console connection
• 1
Rack mount kit including two mounting
brackets and screws for attaching the brackets
to the security gateway.
Hardware required to mount the unit to the
rack must be provided by the customer.
• 1
Quick Start Guide
March 2004 Installing SG203 and SG208 Security Gateway 17
Avaya SG203/SG208 Security Gateway Hardware Installation Guide
Required tools
The security gateway chassis can be mounted in a standard 19-inch
equipment rack. Rack mounting requires a Phillips-head screwdriver, the
device rack mount bracket kit, and four screws to match the rack. (Screws
for attaching the mounting brackets to the chassis are not provided.)
Instructions for rack mounting are provided in the section “Rackmount” on
page 18.
Safety recommendations
When using the SG203/SG208 security gateway devices, follow these
safety guidelines:
• Keep the chassis area clear and dust-free during and after installation
• Keep the ventilation gratings clear of any blockages
• Do not rest equipment in excess of 10 pounds on top of the chassis
• Disconnect all power before mounting or unmounting a unit from an
equipment rack
• Never assume power is disconnected from a circuit, always check
Circuit Breaker (15A) Warning
WARNING: This product relies on the building’s installation for short-
circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no
larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on
the phase conductor (all current-carrying conductors).
SELV Circuit Warning
WARNING: The Ethernet 10/100/1000BASE-T ports contain safety extra-
low voltage (SELV) circuits. Do not connect to a telephone line.
Desktop
To install on a desktop, allow sufficient depth in the rear for cabling and on
the sides for ventilation flow.
18 Installing SG203 and SG208 Security Gateway March 2004
Avaya SG203/SG208 Security Gateway Hardware Installation Guide
Rackmount
The SG203 and SG208 security gateways can be mounted in a standard
19-inch equipment rack. The location of the chassis and the layout of your
equipment rack or wiring room are extremely important for proper system
operation. Equipment placed too close together, inadequate ventilation,
and inaccessible panels can cause system malfunctions and shutdowns
and can make system maintenance difficult.
The following information can help you plan an acceptable equipment
rack configuration.
• Enclosed racks must have adequate ventilation. Ensure that the rack
is not overly congested because each unit generates heat. An
enclosed rack should have louvered sides and a fan to provide cooling
air.
• When mounting a chassis in an open rack, ensure that the rack frame
does not block the ventilation grates. If the chassis is installed on
slides, check the position of the chassis when it is seated all the way
into the rack.
To attach the device to a standard 19-inch equipment rack:
1. From one side of the device, remove the four front side screws.
2. Using the screws provided with the bracket, attach the bracket to the
device.
Figure 4 Attaching the Rack Mount Brackets
3. Repeat bracket installation on the other side.
4. Install the device into a standard 19-inch rack, using screws that fit the
rack (not provided).
March 2004 Installing SG203 and SG208 Security Gateway 19
Avaya SG203/SG208 Security Gateway Hardware Installation Guide
Overview of front panel
Figure 5 Front panel of the security gateway
Console port
The console port accepts an RS-232 DB-9 connection from an
asynchronous ASCII terminal or a PC running terminal emulation
software. The connection requires a null modem cable which is supplied.
The communication settings for a device interfacing with the console port
are provided in Table 5.
Table 5 Terminal settings
Public portPrivate port
Ethernet port
Status Indicators
Console
port
Multi interface portsExpansion slot
Parameter Setting
Baud 9600
Data Bits 8
Parity None
Stop bits 1
Flow control None
20 Installing SG203 and SG208 Security Gateway March 2004
Avaya SG203/SG208 Security Gateway Hardware Installation Guide
Multi-interface ports
Four ports are available on the security gateway, public, private and two
other interface ports that are not designated.
The public port provides an interface to the public Internet network, while
the private port provides an interface to the private local network. The
other two could be used for public-backup, semi-private, DMZ, or
management interface zones.
The SG203 requires a crossover cable when connecting to a router and
uses a straight-through cable when connecting to a hub or switch. The
SG208 can use any type of cable (crossover or straight-through) when
connecting to a hub, switch, or router.
NOTE: To realize maximum performance when operating at the 1000
Base-T rate, it is necessary to use CAT5e cables, shipped with the
device. Standard CAT5 cables are not rated for full Gigabit data rates.
Connecting the SG203/SG208 security gateway to the
network
The supplied Cat5e cables are used to connect the security gateway to
the public network and the private LAN. Figure 6 shows a typical network
using the SG203 and SG208 security gateway.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Avaya AG250 Quick start guide
-
-
-
Avaya B179 User manual
-
-
-
-
-
-