Pioneer XW-SMA4 User manual

Type
User manual

This manual is also suitable for

XW-SMA1/XW-SMA3/XW-SMA4
About the addition of the Internet Radio/PUSH PLAYER function
Contents
Updating the unit’s rmware ................................................................................................................................. 1
Installing ControlApp ............................................................................................................................................ 2
Using ControlApp ................................................................................................................................................. 2
Operating the CONTROL screen ....................................................................................................................................3
Play music on Pandora/Internet Radio ............................................................................................................................3
Stop playback on Pandora/Internet Radio .......................................................................................................................3
If ControlApp is disabled or the connection with this unit is disrupted during audio playback .........................................4
Using dedicated Pioneer website to register stations not on the vTuner list ...................................................................4
Using PUSH PLAYER to play music on a mobile device ................................................................................................5
Troubleshooting .................................................................................................................................................... 8
Updating the unit’s rmware
First connect this unit and your PC
*1
to the same network.
For more information on network connections, see the section “Connect to network”, parts A to E (page 18 of the Operating Instructions).
*2
*1 Operation has been con rmed using Internet Explorer versions 8/9 on Windows, and Safari on Mac computers.
*2 Firmware updating cannot be performed using the method described in “F. Wireless Direct Function”.
This wireless speaker has been designed to allow you to enjoy Pandora*/Internet Radio/PUSH PLAYER. In order to play Pandora/Internet
Radio/PUSH PLAYER function, however, it may be necessary to update the unit’s rmware and to also install Pioneer ControlApp on your
mobile device.
* As of May 2013, the Pandora service is only offered in the United States, Australia and New Zealand.
Important
Do not disconnect the AC power adapter during the update process. When using the XW-SMA3, it is necessary to rst connect the AC
adapter to the unit (updating cannot be performed when operating the unit using the built-in battery). When updating the unit’s rmware,
it is necessary to connect the unit to a network (except method F of “Connect to network”); for more information see page 18 of the
Operating Instructions.
When this unit’s rmware is updated, settings are returned to their factory default values. In that case, it will be necessary to reset the
unit’s network settings.
1. Display the Web Control menu.
Choose the access method appropriate for your device.
Using Safari to access Web Control
1. Start the Safari browser on your computer.
2. Click on the bookmark icon (
) at the upper left of the
screen.
3. Click on Bonjour list (a), and select this unit’s friendly
name (b).
It is necessary to previously set Safari to display Bonjour.
a
b
Using UPnP function to access Web Control (after
connecting to the network)
This unit supports UPnP. You can access the Web Control
menu from a UPnP-supported device connected to the same
network as this unit. For details, consult your computer’s
operating instructions.
Using Microsoft Windows 7/Vista
1. Click on “Start” “Documents” “My Documents”.
2. From the Explorer menu on the left side of the screen,
select “Network”.
This unit will appear as an icon connected to the same
network.
3. Right-click on this unit’s icon and select “View device
webpage”.
You should now be able to access the Web Control menu.
XXXXX XXXXX XXXXX
XW-SMA1
XW-SMA1
Using Windows XP
1. Click on “Start” “My Network”.
2. Click on “Display icons for UPnP devices connected to
the network”.
This unit will appear as an icon connected to the same
network.
3. Double-click on this unit’s icon.
You should now be able to access the Web Control menu.
XW-SMA1 XXXXXX XXXXXX XXXXXX
XW-SMA1
1
ENEN
2. Con rm your unit’s rmware version.
Con rm the unit’s rmware version on the Web Control menu.
S****.1000.0
XW-SMA1
S****.1000.0
3. Download the new rmware.
The latest rmware can be downloaded from Pioneer’s website.
Note
• The rmware le will be downloaded to the folder you specify.
Depending on your browser and its settings, the destination
selection window may not appear when downloading
the rmware le. In this case, the le will be downloaded
automatically to the folder designated in your browser settings.
• The rmware le will be downloaded in compressed “zip”
format.
(Example) Compressed le name: SMA2013NMP****.zip
The four asterisks (****) indicate the version number.
4. Open the downloaded compressed le.
Decompress the rmware le and store the contents in a folder
of your choosing.
Note
When the compressed le is decompressed, a new folder will
be created and the updated rmware le (SMA2013NMP****.fw)
will be stored in the new folder.
For more information about how to decompress les, consult
your software or computer dealer.
Using ControlApp
If using ControlApp for the rst time, follow these procedures to start the application.
5. Select rmware update.
On the Web Control menu, click on Firmware Update (a)
followed by Start (b).
a
b
The Firmware Update Prepare screen is displayed. If the
screen does not switch automatically, click on Click Here.
6. Select the update le.
Click on the Choose File button (a) and select the rmware le
(SMA2013NMP****.fw) previously downloaded, and then click
on the Upload button (b). Then, press Yes on the con rmation
screen. Once the update has begun, it cannot be cancelled.
b
a
S1000
BCO_1000.fw
11
7. Con rm that the update has completed properly.
When the update has begun, the update process will be
displayed. When the update process nishes, follow the
instructions on the screen and unplug the power cord.
Note
If the update process is not completed within ten minutes, try
unplugging the unit, then repeat the update process.
Installing ControlApp
Next, the Pioneer application ControlApp must be installed on your mobile device. For more information about your operating environment,
access the appropriate Website as noted below.
If using an iPhone or iPod touch
You can obtain from “App Store”.
1. Connect this unit to the network you normally use.
2. Connect your mobile device to the same network.
Con rm that ControlApp is installed on your mobile device.
3. Turn on the power to this unit.
4. Start ControlApp on your mobile device.
on
input
network
input
volume
standby/on
Wired/Wireless
Wireless
5. Tap the Download button.
When download is completed, the CONTROL screen will be
displayed.
Download
2
If using an Android device
You can obtain from “Google Play”.
Operating the CONTROL screen
2
3
4
5
1
1. PUSH PLAYER
Switch to PUSH PLAYER screen. Play music les stored in iPhone/iPod touch or Android
device. For details on how to use the PUSH PLAYER screen, see pages 5-7.
2. Internet Radio
Switches to the Internet Radio Control screen.
3. Pandora*
Switches to the Pandora Control screen.
* As of May 2013, the Pandora service is only offered in the United States, Australia and New Zealand.
Note
When the unit is set to Quick Start Mode and is currently in standby mode, if the Internet
Radio or Pandora button is tapped, the unit’s power will turn on and source input will
switch to either Internet Radio or Pandora.
4. Volume
Drag this control to adjust the sound volume.
5. Mute
Tap this icon to activate and deactivate the mute function.
Play music on Pandora/Internet Radio
1. Connect this unit and your mobile device to a
network.
The Pandora and Internet Radio functions cannot be used
when using a wireless direct connection.
2. Start ControlApp.
3. Tap the Pandora or Internet Radio button.
The unit’s source input will switch to Pandora or Internet Radio,
and the unit’s input indicator will light steadily green.
on
input
network
Green
4. Tap the playback control button.
Audio playback will begin.
Stop playback on Pandora/Internet Radio
During use of Pandora/Internet Radio, playback can be stopped by performing any of the following operations.
Using any button controls on the unit or its remote control that turn the unit’s power off
The next time power is restored, the input function will automatically be set to the input (iPod or AUX IN) selected before use of Pandora
or Internet Radio.
Using any button controls on the unit or its remote control that change input to anything besides Pandora or
Internet Radio
Input function will automatically return to the input (iPod or AUX IN) selected before use of Pandora or Internet Radio.
Using another device to operate this unit and start AirPlay or DMR
Input function will be set to AirPlay or DMR.
During Pandora or Internet Radio play, if the Mute function is set to ON and more than 20 minutes expires
When the Mute function has operated for 20 minutes, the unit’s power is automatically turned off.
Auto power OFF will be cancelled if the Mute function is cancelled, or if the volume control is used.
Playback
control buttons
Note
When listening to music with Pandora/Internet Radio, the
following remote control buttons will be disabled:

(play/
pause),
(prev), and
(next)
Buttons remaining enabled on this unit and its remote control
include
standby/on, input, and volume –/+ (vol –/+).
3
Note
Pandora is personalized internet radio that is designed to help you discover new music youʼll love mixed in with music you already
know.
For details, check the website: http://www.pandora.com
As of May 2013, the Pandora service is only offered in the United States, Australia and New Zealand.
You must have a registered account in order to listen to songs using Pandora Internet Radio.
Select PANDORA, then follow the instructions on the screen to make the account settings.
Some functions may be changed at Pandoraʼs discretion.
When disposing of the product, we recommend you reset it to delete the data. See Resetting the system on page 35 on the Operating
Instructions.
• Pandora
®
, the leading internet radio service, gives people music they love anytime, anywhere, through personalized radio stations.
Note
Track information may not be displayed correctly depending on the station and audio contents.
Note
“Internet Radio” is radio programming distributed over the internet. Numerous internet radio stations exist around the world, ranging in
size from small services run by individuals to large stations managed by commercial ground-based broadcasting companies. Ordinary
ground-based broadcasting is limited to the range of the radio wave, but Internet Radio allows reception of radio programs from around
the world, delivered through the Internet. On the other hand, depending on the status of the Internet connection, broadcast sounds may
sometimes be interrupted or garbled.
A broadband connection is recommended when listening to Internet Radio. Use of a 56K modem or ISDN connection may inhibit your
ability to fully appreciate the potential of Internet Radio.
Computer port numbers for Internet Radio may differ, depending on the station, so it is recommended to check your rewall settings.
The provision of lists of broadcasting stations by vTuner may be discontinued without noti cation.
Broadcasting stations sometimes interrupt or discontinue broadcasts. In such cases, it may not be possible to receive broadcasts
from a station, even though it is published on a list of available stations.
The list of Internet Radio stations provided with this unit is based on the radio station database service vTuner. This database service
is edited and compiled for use with this unit.
vTuner is an online contents service for Internet Radio. For more information about vTuner, consult the website at http://www.vtuner.
com.
This product is protected by certain intellectual property rights held by NEMS and BridgeCo. Use or distribution of such technology
outside of this product is prohibited without a license from NEMS and BridgeCo or their authorized subsidiary.
Accessing external contents requires a high-speed Internet connection, together with registration and contract with a commercial
Internet provider. Services from third-person content providers may be changed, interrupted, or discontinued without notice, and Pioneer
assumes no responsibility for any such issues. Pioneer makes no guarantees regarding the continuity or future availability of external
content-providing services.
Using dedicated Pioneer website to register stations not on the vTuner list
This unit can be used to register and play programmed material from stations not found on lists distributed by vTuner. To do this, con rm the
access code necessary to register this unit, and use that code to access the dedicated Pioneer internet radio site; through it, you can register
your favorite stations. The URL for the dedicated Pioneer Internet Radio site is http://www.radio-pioneer.com.
1. Display the top level screen of the Internet Radio list.
2. Tap on “Help”.
3. Tap on “Get access code”.
The screen will display the access code necessary to register stations on the dedicated Pioneer Internet Radio site; record that
access code on piece of paper.
The Help screen allows you to con rm the following items:
Get access code: Displays access code necessary to register on the dedicated Pioneer Internet Radio site.
Show Your WebID/PW: After registering on the dedicated Pioneer Internet Radio site, your registration ID and password will be
displayed.
Reset Your WebID/PW: Resets all registration information on the dedicated Pioneer Internet Radio site. When this is reset, any
broadcast stations you have registered there will also be erased, so if you wish to continue to listen to any sites you previously
registered, re-register them after performing the reset.
4. Accessing the dedicated Pioneer Internet Radio site from your computer.
http://www.radio-pioneer.com
Use the above URL to access the site.
If ControlApp is disabled or the connection with this unit is disrupted during audio
playback
If you return to the home page on your mobile device, start another application, or allow the device to enter sleep mode, the connection
between this unit and ControlApp will be cut. Even if the connection is cut, however, audio play will continue on the unit.
Even if the connection with ControlApp is cut, the following buttons on the unit and its remote control will continue to be enabled:
standby/on, input, volume –/+ (vol –/+).
In the event ControlApp is stopped during audio play, the unit can be operated again by restarting ControlApp and reestablishing a
connection between it and this unit.
4
5
5. To change the siteʼs language, choose the applicable country ag on the rst page of this website.
6. Read the disclaimer and if in agreement, click on “ACCEPT”.
7. Use the access code noted in step 3 to perform user registration according to the instructions on the screen.
8. Follow the instructions on the screen to register your favorite stations.
Here, you can register both stations not on the vTuner list, and stations on the list as well. In this case, the stations will be recorded
on this unit as favorite stations, allowing you to play them easily.
2
1
3
1
2
3
4
5
1. Switch screen
Switch to playlist screen.
2. Track info
Displays information about the currently playing track.
3. Audio output
Displays list of audio output devices.
From the audio output list, select this speaker (XW-SMA) to output sound from the unit.
Note
If no sound output devices are found, the will not be displayed.
The Audio output screen will display all devices compatible with AirPlay in your network
environment.
Playback screen
This screen is used when playing music les stored in your iPhone/iPod touch. AirPlay is used to output audio to this unit.
1. Edit
Delete and edit order of tracks on playlist.
2. Playlist
Displays music list playable by ControlApp.
Note
This playlist is different from the playlists found in the music library of your iPhone/iPod
touch.
Even when this screen is used to edit/delete a playlist, it has no effect on the playlists
found in the music library of your iPhone/iPod touch.
3. Switch screen
Switch to playback screen.
4. Clear
Deletes the playlist (but has no effect on the playlists found in the music library of your
iPhone/iPod touch).
5. Add
Displays the music library on your iPhone/iPod touch.
From this screen, you can select tracks you wish to add to the ControlApp playlist; press
END to nalize the selection.
Note
You can also add multiple tracks at one time, or add tracks in units of entire albums or artists.
Playlist screen
Displays music list playable by ControlApp.
Using PUSH PLAYER to play music on a mobile device
When using an iPhone/iPod touch
6
When using an Android device
If a music le is selected, the unit will operate as a DMR and begin playing music.
When Demo Mode is set to ON, music les will be played by the Android device.
Note
Due to differing speci cations of each Android device, it may not be possible to play some les, even when their format is generally
supported by this speaker
(XW-SMA). For more information on supported audio le formats, consult the Operating Instructions for this
speaker unit and your Android device.
• If a le in an unsupported format is selected, playback will automatically stop.
• If a le in an unsupported format is included in a list, the le will be automatically skipped and the next playable le will be played.
3
4
1
2
5 6 7
1. Switch screen
Switches to CONTROL screen.
2. Track
Displays track list.
3. Playback operations
Displays playback operation panel.
4. Playlist
Displays playlist.
5. Album
Displays album list.
6. Artist
Displays artist list.
7. Genre
Displays genre list.
Track select screen
Music les on the Android device will be displayed. Tap a track name on the list to start playback.
Use a long press on a track name in order to edit the playlist.
The following operations can be performed on this screen:
Create new playlist
Add to playlist
Delete track from playlist
Change playlist name
• Delete playlist
7
1. Track select
Switches to track select screen.
2. Switch screen
Switches to CONTROL screen.
3. Previous
Skip to previous le in list.
4. Stop
Stops playback.
5. Volume
Use to set the listening volume.
6. Now playing list
Displays the list currently being played.
7. Repeat
The currently selected les are played back repeatedly.
Each tap switches the repeat function alternately as follows:
Repeat playback of currently playing track.
Repeat playback of all tracks in currently selected list.
Repeat function OFF.
8. Shuf e
Music les in the currently selected list are played back in
random order (shuf e play).
Each tap switches shuf e play alternately ON/OFF.
9. Next
Skip to next le in list.
10. Play/Pause
Starts playback. Each tap swiches pause/unpause playback
during playback.
6
8
9
2
4
1
3
7
5
10
Playback operation screen
Select to perform playback operations.
Windows and Windows Vista are either registered trademarks or trademarks of Microsoft Corporation in the United States, Japan and/
or other countries.
Android and Google Play are trademarks of Google Inc.
AirPlay, iPhone, iPod, iPod touch, Safari, Bonjour and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
Troubleshooting
Problem Cause/Remedy
Can’t decompress rmware le (zip le) When using Windows XP and later operating systems, a zip- le extractor is
furnished as a standard feature, allowing zip les to be treated as ordinary
folders. From the Pioneer website, store the downloaded rmware folder
(SMA2013NMP****.zip) on your computer. Open the folder and copy the
rmware le (SMA2013NMP****.fw) located inside the folder to your computer’s
desktop or other desired location.
Mac OS X and later operating systems allow compressed zip les to be treated
as normal les. When you double click on the downloaded rmware zip le
(SMA2013NMP****.zip), a decompressed ordinary folder will be created in the
same place.
Bonjour isn’t displayed when using Safari. Set your computer to allow Safari to display Bonjour.
Sound stops while listening to Pandora/Internet
Radio/PUSH PLAYER.
Is the unit’s Mute function enabled? Turn off the Mute function.
Has an error message been generated? Check the ControlApp screen.
If the unit is not connected to ControlApp, connect ControlApp to the unit once
again and check the display.
If the above steps do not rectify the problem, try changing the input, or turn the
unit off and on again.
The unit cannot be started (power connected) with
the input function set to Pandora/Internet Radio.
When the power is turned on to this unit, it will not start in Pandora/Internet
Radio mode.
However, when the unit is set to Quick Start Mode and is currently in standby
mode, if one of the Internet Radio or Pandora buttons is tapped, the unit’s
power will turn on and Internet Radio or Pandora modes will be selected.
The unit automatically powers down. If the Mute function is left enabled for more than 20 minutes, the unit is designed
to automatically turn power off.
Auto power OFF will be cancelled if the Mute function is cancelled, or if the
volume control is used. For details see the section “Stop playback on Pandora/
Internet Radio” (P. 3).
Pandora/Internet Radio continues playing even after
stopping ControlApp.
Pandora/Internet Radio will continue to play on the unit even after closing
ControlApp. In that case, however, ControlApp cannot be operated.
To access ControlApp operations, start ControlApp once again and connect to
this unit.
Can’t connect ControlApp Is the unit’s rmware version lower than [1050]? If so, update the rmware
version.
If connection is still not possible, consult the following website:
When using iPhone/iPod touch
http://pioneer.jp/support/soft/iapp_controlapp/en.html
When using Android
http://pioneer.jp/support/soft/aapp_controlapp/en.html
Remote control buttons don’t respond. When playing Pandora/Internet Radio or PUSH PLAYER (for Android device),
the following buttons on the unit’s remote control are disabled and cannot be
used:

(play/pause),
(prev),
(next).
The message “Connecting...” appears, but no play
starts.
Is the power disconnected to the device? Is the device connected properly to this
unit? Check power source and connections for the device.
Can’t play Pandora/Internet Radio Is a rewall set on network devices? Check the rewall setting on network
devices.
Has the Internet connection been dropped? Con rm that network device settings
are proper, and if necessary consult your network connections dealer.
Has the radio station interrupted or stopped its broadcast? Note that it may not
be possible to access stations even if they are on the issued station list.
A track cannot be played by PUSH PLAYER. Due to differing speci cations of each Android device, it may not be possible to
play some les, even when their format is generally supported by
this speaker
(XW-SMA)
. For more information on supported audio le formats, consult the
Operating Instructions for this speaker unit and your Android device.
<ARI7040-C>
8
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Pioneer XW-SMA4 User manual

Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI