Yottamaster DF4RU3 User guide

Tutorial: Yottamaster Multi-bay Hard Drive Enclosure

RAID Array Configuration

Email: supports@yottamaster.com

The Yottamaster Multi-bay hard drive enclosure with RAID function has two ways to

set RAID mode:

Way 1: Setting through the RAID hardware switch on the back of the hard drive

enclosure.

Way 2: Setting through RAID management software: download the corresponding

RAID management software from the Yottamaster website and follow the software

guide to complete the set-up

Way 2: Setting through RAID management software

1. then click “Support”

to open the support page.

2. On Support page, click “Driver Download” to open download page.

3. On download page: https://support.yottamaster.com/download, please be sure to

check your computer system and download the corresponding firmware.

4. Take Windows system as an example. Download the “setup.exe”

5. Then install and open the Yottamaster RAID Manager.

6. In Basic Mode, you can see your RAID and Disk Information.

7. If you have purchased a multi-bay hard drive enclosure with RAID version, our

product technicians recommend setting the 4-bay and 5-bay hard drive enclosure to

RAID 5 mode, and the 2-bay enclosure to RAID 1 mode, as they are more secure

options.

In Basic Mode, select “Basic RAID Configuration” to set up RAID

Mode.

8. In addition, after setting up the RAID, you can modify the automatic sleep time for

the hard drive enclosure in the advanced settings page.