2. Juno
  3. H-TYPE
H-TYPE

Juno H-TYPE User manual

  • Hello! I have reviewed the Installation Instructions for the Juno H-Type Adapter. This document provides step-by-step guidance for mounting your adapter, including the alignment of latch and polarity line, rotation of the adapter box and positioning second circuit. I am ready to answer your questions about its installation.
  • How do I insert the adapter box into the track?
    What is the next step after inserting into track?
    How is the second circuit positioned?
INSTALLATION INSTRUCTIONS
For H-Type Adapter
1300 S. Wolf Road • Des Plaines, IL 60018 • 800-323-5068 •www.acuitybrands.com
©2017 Acuity Brands Lighting, Inc. Rev 4/18 P4677
1 of 1
Find the latch and the polarity line.
Align parts as shown below and
insert the adapter box into the track
Rotate the adapter box opposite
the arrows until the latch snaps in
place between the two track rails Final Position
SAVE THESE INSTRUCTIONS
Polarity Line
Latch on
adapter box
Continue to depress
latch until final position Latch snaps into place
between rails
Second Circuit Positioning
1. Hold onto Adapter Box with one hand
2. Place the end of a flat head screw driver under the contact shown below
3. Gently pull up, the contact should move vertically until hitting a hard stop
4. Follow instructions for inserting into track
Place flat head under the contact
Final Position
Rotate adapter
box opposite
the arrows
Coming Soon
/