2. Juno
  3. L-Type Track Adapter

Juno L-Type Track Adapter User manual

  • Hello! I've reviewed the Installation Instructions for the Juno L-Type Track Adapter Option. This document provides detailed steps for installing the adapter, including aligning the latch, securing it in the track, and adjusting the contact. I'm ready to answer any questions you may have about this process or the product itself.
  • What should I do before inserting the adapter box into the track?
    How do I secure the adapter once inserted?
    What tool is needed for the second circuit positioning?
INSTALLATION INSTRUCTIONS
For L-Type Track Adapter Option
1300 S. Wolf Road • Des Plaines, IL 60018 • 800-323-5068 •www.acuitybrands.com
©2017 Acuity Brands Lighting, Inc. Rev 4/18 P4678
1 of 1
Find the latch and the polarity line. Align
parts as shown below and insert the
adapter box into the track.
Latch on adapter Rotate in the direction
of the "Install" arrow
Continue to rotate until the latch snaps
in place between the two track rails. Final Position
Latch snaps into place between rails
Second Circuit Positioning
1. Hold onto Adapter Box with one hand
2. Place the end of a flat head screw driver under the contact shown below
3. Gently pull up, the contact should move vertically until hitting a hard stop
4. Follow instructions for inserting into track
Ground contact
Final Position
SAVE THESE INSTRUCTIONS
Find contact above the ground contact.
This is the only contact that is adjustable.
Polarity line
Continue to depress latch until
final position
Coming Soon
/