2. Wallgate
  3. PSH-30
PSH-30

Wallgate PSH-30 User manual

  • Hello, I am a chat assistant familiar with the Wallgate Handwash Fascia PSH-30 installation manual. This document provides crucial details for installing the handwash unit, including anti-ligature features, mounting options, and specific requirements for water and electrical connections. I've reviewed the document and am ready to answer your questions about the product and its installation.
  • What is the required wall aperture for the fascia?
    What type of waste trap is recommended?
    What is the minimum water supply pressure needed?
    What is the thickness of the air grille slots?
    What is the mounting thickness of the fascia?
DETAIL VIEW C
DETAIL VIEW A
DETAIL VIEW B DETAIL VIEW D
C
A
B
D
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
MATERIAL:
FINISH:
t: +44 (0) 1722 744 594 f: +44 (0) 1722 742 096 e: sales@wallgate.com w: www.wallgate.com Company Reg No. 156022
THIS DRAWING IS THE PROPERTY OF WALLGATE LIMITED AND IS ISSUED ON THE STRICT UNDERSTANDING THAT THE INFORMATION CONTAINED WILL NOT BE REPRODUCED, COPIED OR USED WITHOUT PRIOR AGREEMENT OF WALLGATE LTD.
A3
Limits: (unless stated)
` 0.25mm (sheetmetal)
` 0.10mm (machined)
` 2.00mm (pattern)
` 5.00mm (moulded)
c
O Copyright
Model/Client/Project:
TITLE:
Drg No: SCALE:
All dimensions in mm,
All angles 90~(unless stated)
3rd
SHEET 1 OF
INS-PSH-30
2022
NTS
5
HANDWASH FASCIA
430
420
REVISION HISTORY
REV DATE DESCRIPTION BY CHKD
1 17/10/2022 CREATED AG LP
NOTES:
1. THE AIR GRILLE IS SLOTTED WITH THE SLOTS BEING 2mm WIDTH. ONE
WEB RUNS HORIZONTALLY TO REDUCE THE VERTICAL SLOT LENGTH
2. THE WATER AND SOAP NOZZLES HAVE 2mm OUTLET HOLES
3. THE WASTE GRILLE IS SLOTTED WITH THE SLOTS BEING 2mm WIDTH. A WEB
RUNS HORIZONTALLY TO REDUCE THE VERTICAL SLOT LENGTH.
4. THE HANDWASH FASCIA IS DESIGNED TO BE AS ANTI LIGATURE AS
POSSIBLE WITH INTERNAL FACES ANGLED TO PREVENT ITEMS BEING
JAMMED INTO THE BOWL.
NOTE 4
WASH NOZZLE
NOTE 2
AIR GRILLE
NOTE 1
SOAP NOZZLE
NOTE 2
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
MATERIAL:
FINISH:
t: +44 (0) 1722 744 594 f: +44 (0) 1722 742 096 e: sales@wallgate.com w: www.wallgate.com Company Reg No. 156022
THIS DRAWING IS THE PROPERTY OF WALLGATE LIMITED AND IS ISSUED ON THE STRICT UNDERSTANDING THAT THE INFORMATION CONTAINED WILL NOT BE REPRODUCED, COPIED OR USED WITHOUT PRIOR AGREEMENT OF WALLGATE LTD.
A3
Limits: (unless stated)
` 0.25mm (sheetmetal)
` 0.10mm (machined)
` 2.00mm (pattern)
` 5.00mm (moulded)
c
O Copyright
Model/Client/Project:
TITLE:
Drg No: SCALE:
All dimensions in mm,
All angles 90~(unless stated)
3rd
SHEET 2 OF
INS-PSH-30
2022
1 : 9
5
PSH-30 INSTALLATION
REVISION HISTORY
REV DATE DESCRIPTION BY CHKD
1 13/10/2022 CREATED AG LP
160
380 MOUNTING
BRACKET WIDTH
232
CONTROL MODULE
AND WATER
HEATER DEPTH
260 SOAP BOTTLE
AND BRACKET HEIGHT
145 SOAP
BOTTLE WIDTH
105 SOAP BOTTLE
THICKNESS
380
APERTURE
HEIGHT
375
MINIMUM
APERTURE
328
NOTES:
1. THIS SHEET SHOWS THE CONTROL MODULE IN ITS STANDARD MOUNTING POSITION. THE CONTROL MODULE SITS BEHIND THE FASCIA FOR
EASE OF CONNECTION
2. THE UNIT REQUIRES A WALL APERTURE OF 375mm WIDTH BY 380mm HEIGHT.
3. THE BASIN WASTE PIPE SHOULD BE CONNECTED TO A 1 1/2" (40mm NOMINAL) DEEP SEAL WASTE TRAP (NOT SUPPLIED), A RUNNING TRAP IS NOT RECOMMENDED FOR THIS PRODUCT.
4. A WATER SUPPLY OF MINIMUM 1.0 Bar IS REQUIRED FOR CONNECTION TO THE WATER INLET ON THE FRONT OF THE UNIT. THE SUPPLY IS TO BE ROUTED THROUGH THE PROVIDED ISOLATOR VALVE.
5. THE CONTROL MODULE IS SUPPLIED WITH A 2 METER CABLE WITH EXPOSED ENDS FOR CONNECTION TO A 230v AC 50Hz 13Amp ELECTRICAL SUPPLY.
6.THE WATER HEATER SUPPLIED WITH 0.7M FLYING LEAD TO BE INSTALLED INTO A SEPARATE 230v AC 50Hz 13Amp FUSED SPUR AS PER ZIP ES3 MANUAL.
7. FULL INSTALLATION DETAILS CAN BE FOUND IN THE PSH_30 PRODUCT MANUAL SUPPLIED WITH THIS PRODUCT.
8. THE FASCIA CAN BE INSTALLED MOUNTED IN WALLS BETWEEN 13mm AND 175mm THICK. LONGER STUD BARS CAN BE PURCHASED FOR INSTALLATION INTO THICKER WALLS.
9. ENSURE 100mm CLEARANCE ABOVE THE AIR INTAKE TO ENSURE ADEQUATE AIRFLOW TO THE UNIT.
FASCIA
45~ RECESS
FOR ANTI-
PICK MASTIC
(ALL ROUND)
INSTALL IN-LINE WITH
LOCAL REGULATIONS
FFL
WALL (NOTE 8)
WATER INLET PIPE
15mm ENDS
(NOT SUPPLIED)
1.5" (NOMINAL 40mm)
X 125mm WASTE PIPE
2.5 LITRE SOAP CONTAINER
(EXAMPLE POSITION SHOWN)
SOAP BOTTLE CAN BE MOUNTED UP
TO 45cm FROM THE SOAP INLET POINT
ISOLATOR TAP
(HAND WASH)
APERTURE TO
LIP HEIGHT 70mm
WATER SUPPLY PIPE
15mm ENDS
(NOT SUPPLIED)
100 MINIMUM
CLEARANCE
(NOTE 9)
230vAC 50Hz POWER
CONNECTION
SWITCHED FUSED
SPURS NOT SUPPLIED
517
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
MATERIAL:
FINISH:
t: +44 (0) 1722 744 594 f: +44 (0) 1722 742 096 e: sales@wallgate.com w: www.wallgate.com Company Reg No. 156022
THIS DRAWING IS THE PROPERTY OF WALLGATE LIMITED AND IS ISSUED ON THE STRICT UNDERSTANDING THAT THE INFORMATION CONTAINED WILL NOT BE REPRODUCED, COPIED OR USED WITHOUT PRIOR AGREEMENT OF WALLGATE LTD.
A3
Limits: (unless stated)
` 0.25mm (sheetmetal)
` 0.10mm (machined)
` 2.00mm (pattern)
` 5.00mm (moulded)
c
O Copyright
Model/Client/Project:
TITLE:
Drg No: SCALE:
All dimensions in mm,
All angles 90~(unless stated)
3rd
SHEET 3 OF
INS-PSH-30
2022
1 : 6
5
PSH-30 FASCIA
INSTALLATION
74 WALL
TO FASCIA LIP
175 WALL TO
BACK OF
FASCIA
REVISION HISTORY
REV DATE DESCRIPTION BY CHKD
1 17/10/2022 CREATED AG LP
OVERALL DISTANCE: X (SEE NOTE ABOVE)
NOTES:
1. THIS SHEET SHOWS THE OVERALL DIMENSION FROM THE FRONT OF THE WALL TO THE REAR
OF THE HEATER, DIMENSION X.
ON A 13mm WALL X = 358mm. (13mm WALL + 113mm SPACER+ 232mm CONTROL MODULE).
ON A 175mm WALL X = 427mm. (175mm WALL + 232mm CONTROL MODULE).
ENGINE
MOUNTING
BRACKET
FASCIA
CLAMPNG
BRACKET
REAR PROFILE
OF BOWL
270
350
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
MATERIAL:
FINISH:
t: +44 (0) 1722 744 594 f: +44 (0) 1722 742 096 e: sales@wallgate.com w: www.wallgate.com Company Reg No. 156022
THIS DRAWING IS THE PROPERTY OF WALLGATE LIMITED AND IS ISSUED ON THE STRICT UNDERSTANDING THAT THE INFORMATION CONTAINED WILL NOT BE REPRODUCED, COPIED OR USED WITHOUT PRIOR AGREEMENT OF WALLGATE LTD.
A3
Limits: (unless stated)
` 0.25mm (sheetmetal)
` 0.10mm (machined)
` 2.00mm (pattern)
` 5.00mm (moulded)
c
O Copyright
Model/Client/Project:
TITLE:
Drg No: SCALE:
All dimensions in mm,
All angles 90~(unless stated)
3rd
SHEET 4 OF
INS-PSH-30-R
2022
1 : 9
5
REMOTE MOUNTED PSH-30
REVISION HISTORY
REV DATE DESCRIPTION BY CHKD
1 17/10/2022 CREATED AG LP
NOTES:
1. THIS SHEET SHOWS A REMOTE MOUNTING POSITION FOR THE CONTROL MODULE WITH THE AIR CONNECTED TO THE FASCIA
THROUGH AN LONG FLEXIBLE AIR HOSE. THIS FACILITY ALLOWS THE CONTROL MODULE TO BE MOUNTED IN A VARIETY OF DIFFERENT
POSITIONS TO SUIT SITE REQUIREMENTS. (PLEASE NOTE: IF THIS INSTALLATION METHOD IS REQUIRED IT MUST BE REQUESTED
WHEN THE ORDER IS PLACED SO THAT THE APPROPRIATE CONNECTIONS CAN BE SUPPLIED.)
2. THE FASCIA REQUIRES A WALL APERTURE OF 375mm WIDTH BY 380mm HEIGHT.
3. THE SOAP CONTAINER HANGS ON A BRACKET THAT CAN BE WALL MOUNTED TO SUIT REQUIREMENTS ON SITE.
4. THE BASIN WASTE PIPE SHOULD BE CONNECTED TO A 1 1/2 " (40mm NOMINAL) DEEP SEAL WASTE TRAP (NOT SUPPLIED), A RUNNING TRAP IS NOT RECOMMENDED FOR THIS PRODUCT.
5. A WATER SUPPLY OF MINIMUM 1.0 Bar IS REQUIRED FOR CONNECTION TO THE WATER INLET ON THE FRONT OF THE UNIT. THE SUPPLY IS TO BE ROUTED THROUGH THE PROVIDED ISOLATOR VALVE.
6. THE CONTROL MODULE IS SUPPLIED WITH A 2 METER CABLE WITH EXPOSED ENDS FOR CONNECTION TO A 230v AC 50Hz 13Amp ELECTRICAL SUPPLY.
7.THE WATER HEATER SUPPLIED WITH 0.7M FLYING LEAD TO BE INSTALLED INTO A SEPARATE 230v AC 50Hz 13Amp FUSED SPUR AS PER ZIP ES3 MANUAL.
8. FULL INSTALLATION DETAILS CAN BE FOUND IN THE PSH_30 PRODUCT MANUAL SUPPLIED WITH THIS PRODUCT.
9. THE FASCIA CAN CAN BE MOUNTED IN WALLS BETWEEN 13mm AND 175mm THICK. LONGER STUD BARS CAN BE PURCHASED FOR INSTALLATION INTO THICKER WALLS.
10. ENSURE 100mm CLEARANCE ABOVE THE AIR INTAKE TO ENSURE ADEQUATE AIRFLOW TO THE UNIT.
WALL (NOTE 9)
ISOLATOR TAP
(HAND WASH)
FLEXIBLE AIR HOSE
2.5 LITRE SOAP
CONTAINER
MOUNTED REMOTELY
FASCIA
1.5" (NOMINAL 40mm)
WASTE PIPE TAIL
230vAC 50Hz POWER
CONNECTION
SWITCHED FUSED
SPURS NOT SUPPLIED
CONTROL MODULE
MOUNTED ON
ADJACENT WALL
1
1
2
2
3
3
4
4
5
5
6
6
A A
B B
C C
D D
MATERIAL:
FINISH:
t: +44 (0) 1722 744 594 f: +44 (0) 1722 742 096 e: sales@wallgate.com w: www.wallgate.com Company Reg No. 156022
THIS DRAWING IS THE PROPERTY OF WALLGATE LIMITED AND IS ISSUED ON THE STRICT UNDERSTANDING THAT THE INFORMATION CONTAINED WILL NOT BE REPRODUCED, COPIED OR USED WITHOUT PRIOR AGREEMENT OF WALLGATE LTD.
A3
Limits: (unless stated)
` 0.25mm (sheetmetal)
` 0.10mm (machined)
` 2.00mm (pattern)
` 5.00mm (moulded)
c
O Copyright
Model/Client/Project:
TITLE:
Drg No: SCALE:
All dimensions in mm,
All angles 90~(unless stated)
3rd
SHEET 5 OF
INS-PSH-30
2022
NTS
5
PSH-30 FASCIA AND
ENGINE INSTALLATION
REVISION HISTORY
REV DATE DESCRIPTION BY CHKD
1 17/10/2022 CREATED AG LP
INSTALL THE FASCIA INTO WALL INSTALL HOSES AND CABLES TO FASCIA
FIX ENGINE TO MOUNTING BRACKETS
CONNECT HOSES AND CABLES TO ENGINE
M10 STUD
BAR
WALL FIXING
BRACKET
M10 NUT
FASTEN TO 17Nm
M10 WASHER
AIR HOSE (LENGTH CAN BE
CUT TO SUIT INSTALLATION
REQUIREMENTS).
WATER HOSE PUSH-FIT ELBOW
M6 SECURITY SCREW
SPRING WASHER ON EITHER
SIDE OF RING TERMINAL
EARTH WIRE
SPRING
WASHER
M8 SCREW
HANDWASH PIEZO
AIR OUTLET
WATER OUTLET
SOAP OUTLET
SOAP INLET
EARTH POINT
SOAP
CONNECTION
NOTE: THIS SHEET PROVIDES AN INSTALLATION OVERVIEW FOR REFERENCE ONLY. FOR
FULL DETAILS REFER TO THE PRODUCT MANUAL.
ADDITIONAL SPACE BRACKETS ARE PROVIDED
FOR WALLS LESS THAN 120mm THICK
SOAP PRIME SWITCH
NOT IN USE
/