2. RADIANT ELECTRIC HEAT
  3. 632C
632C

RADIANT ELECTRIC HEAT 632C Installation guide

  • Hello! I've reviewed the provided document, which is an Installation Addendum for Radiant heater models 632C, 645C, 945C and 1445C. This addendum outlines important clearance requirements for both wall and ceiling mounted installations. I'm ready to answer your questions about these specific models and installation requirements.
  • What is the minimum distance required from vertical or horizontal surfaces for installation?
    What is the clearance requirement for wall mounted cove models from a ceiling?
    What is the clearance requirement for ceiling mounted cove models from walls?
Installation Addendum for Model
632C, 645C, 945C and 1445C
This installation addendum is intended for all 632C, 645C, 945C
and 1445C models using optional Ceiling Mounting (CL)
brackets.
On the back of all units is a UL label that states: Do not install
closer than 6 inches (15 cm) from vertical or horizontal
surfaces.
To clarify; for all wall mounted cove models install 6 inches (15
cm) from any horizontal surface (ceiling) above the unit, or 6
inches (15 cm) from any vertical surface (wall) to the sides of
the unit.
For ceiling mounted cove models install 6 inches (15 cm) from
any vertical surface (wall) to the sides of the unit in any
direction.
22901 Aurora Rd. P.O. Box 46703 Bedford Heights, OH 44146-0391 ~ Ph. 800/774-4450 ~ www.electricheat.com
/