PEDRO S 4.0 Master Tool Kit User guide

4.0 Master Tool Kit
Brand
PEDRO S
Model
4.0 Master Tool Kit
Category
Bicycles
Type
User guide
PN 6450658
Made in Taiwan
Specifications subject to
change without notice.
Revision 1 ©2023 Pedro’s NA
Master Tool Kit 4.0
Page 1 of 2
Case Features, Content, and Setup Tips:
1. Heavy Duty Wheeled Case: 56 x 35 x 23cm wheeled case is lockable, dustproof (IP6X), waterproof (IP7X), and MIL-spec certified.
Features heavy-duty latch closures, 3 ergonomic handles (2 carry, 1 retracting), and automatic pressure release valve, all backed by a lifetime
warranty.
2. Burrito Tool Roll II: Unique x-frame system quickly converts the Burrito from a flexible roll into a rigid tool pallet designed to hang on the
front of the case with integrated hooks (#3). The Burrito Tool Roll II features a large 23x16in (60x40cm) surface with numerous pockets in
assorted sizes and types including a large mesh zipper pocket to securely hold small parts or tools. X-frame system is intentionally tight to
ensure optimal long-term functionality. To install x-frame: remove pole halves and assemble. Make sure protective rubber end caps are not
lost when poles are removed from storage slots. Unfold the Burrito and carefully turn over so backside is facing up. Insert the end of one
frame pole into a first corner pocket. Insert second end of the frame pole into the corner diagonally across from the first. Lightly flexing the
pole up away from the surface may help. Repeat for second frame pole.
3. Burrito Hooks: Integrated hooks are spaced to match up to holes on lower case (#4). Intentionally tight interface ensures the Burrito sits flush
to front of the case and hangs vertically when full of tools. Tips for setup: Install x-frame poles before hanging as described above. Push case
latches flat, so they do not interfere. Ensure Burrito flap is tightly folded to the back. Use the Burrito hang strap (not shown) to hold the Burrito
in one hand while attaching hooks to the case.
4. Holes for Hanging Burrito: Holes on lower case match spacing of Burrito Hooks. Holes can also be used for locking case when closed.
5. Lower Case Divider Panel: Offers multiple position options with two primary positions and three sub-positions for fine tuning fit. It also
features an array of tappable holes. Add clips or customizations to secure items to the divider panel in the lower case. To Adjust Position:
Carefully loosen Mounting Screws (#10) using a #2 PH screwdriver and remove Divider Mounts (#6). Reinstall in desired primary position and
with panel in desired slot on Mounts. IMPORTANT: Do not overtighten Mounting Screws. Tighten by hand just until snug.
6. Divider Mounts: Secure Lower Case Divider in place.
7. Upper Case Tool Panel: The lid-mounted upper panel offers a blank slate ready for your custom tool layout. Use the included tool clips
(#14) to dial in your setup or add your own personalized touches. Panel is pre-drilled with a 325-hole array ready to be threaded with the
included M2.5x0.45 Tap (#12). Panel is mounted to for upper lid bosses (#10) using Panel Mount Screws (#13) and can be removed if desired
to ease tool layout and clip installation. IMPORTANT: Do not overtighten Mounting Screws. Tighten by hand just until snug using
a #2 PH screwdriver. Alternatively, the entire case lid can be removed instead by removing the hinge pivot axle.
8. Parts Tray with Lid: Custom parts trays, with removable hinged lids, offer secure storage for small parts and nest internally on the upper
edge of the lower case. The trays also mount externally on the case and feature tool slots perfect for staging in-use tools.
9. Foam Spacer: Soft padding to keep upper tool panel tools protected and hold parts trays in place during transit.
10. Panel Mount Screw: Sized for all upper lid bosses (#11) and all other case mounting bosses. 20 extra included for customization.
11. Upper Lid Bosses and Panel Mount Bosses: IMPORTANT: Do not overtighten Mounting Screws. Tighten by hand just until snug.
12. M2.5x0.45 Tap: Quickly and easily add threads to any of the Upper Case Tool Panel (#7) or Lower Case Divider Panel (#5) holes to mount
clips (#14) or other custom items.
13. M2.5x0.45 Clip Mounting Screws: 50 screws for mounting clips (#14) or other custom items. Will tap their own threads in a pinch.
14. Tool Clips: 50 tool clips ready for your custom layout: 6mm (Qty 10), 10mm (Qty 10), 13mm (Qty 5), 16mm (Qty 10), 19mm (Qty 5)
Pedro’s NA
P.O. Box 320635
Boston, MA 02132, USA
Pedro’s Europe AB
Västra Granholmen 13
SE-18599 Vaxholm, Sweden
1
7
11
9
8
5
6
10
11
2
3
4
12
13
10
14
10
LIFETIME
WARRANTY
Visit pedros.com for details.
The original professional event travel case, the Master Tool Kit has been trusted by mechanics around the world since 2004 and has a track record
matched by no other. Building upon this solid foundation, the 4.0 edition features updates from top to bottom. The kit includes 59 professional
tools including many new and updated items, and an extensive selection of 1/4" hex bits, all focused on expanding kit capabilities. The case is
inspired by the latest trends from the pits, rethinking what a travel tool case can be, with thoughtful consideration to allow the flexibility mechanics
want and need to customize their personal setups. This guide is intended help you learn about the features and content of your Master Tool Kit.
Need further help? Email us at [email protected].
1
2
3
4
5 6
7
8
9
10
11
12 13
14
15
16
17
18
19 20
21
22
23
24
25
26
27
28
29
30
31
34
33
35
32
6
Master Tool Kit 4.0 - Tool Guide
Page 2 of 2
Pedro’s NA
P.O. Box 320635
Boston, MA 02132, USA
Pedro’s Europe AB
Västra Granholmen 13
SE-18599 Vaxholm, Sweden
1. Pro Travel Pedal Wrench: Pulling inspiration from our shop wrenches, and using the same
laser cut tool steel construction, the Pro Travel Pedal Wrench makes quick work of tough pedals and
now doubles as a socket driver for use with Pedro's professional socket tools.
2. Cable Cutter: The Pedro's Cable Cutter is an industry favorite and when put to the test against
the competition and you will quickly see why. Our Cable Cutter is designed for years of service, for
comfortable and easy usage, and with extra jaw overlap ensuring a clean cut every time.
3. Diagonal Cutter Pliers: Feature a compact 6" (150mm) length, forged and heat-treated steel
construction, and ergonomic dual-density grips. The cutting jaws are self-opening and ready for years
of service.
4. Toothbrush: Pedro’s ergonomic Toothbrush uses short, stiff bristles up front for use on chains,
chainrings and cassettes. At the opposite end, longer, larger diameter bristles reach deep between
the cassette cogs for thorough cleaning.
5. The Hammer: Professional quality, efficient, mechanic's hammer perfect for the tool box or
shop, and ready to tackle all your bicycle hammering needs. The Hammer features two-sided, heat
treated tool steel head with a replaceable plastic face on one side. It features a compact
10.75" (275mm) length, 550g weight, and Dice Grip handle for comfort, control, and vibration
absorption.
6. Pro TL II Hex & Torx Wrenches: Pedro's Pro TL wrenches have become a favorite of
mechanics around the world. The updated wrenches feature a new handle shape with slimmer
profiles and full long-leg coverage for enhanced comfort and control, improved tip clearances, easy-to
-read size markings, and color bands for quick identification. Each wrench is crafted from premium S2
tool steel to ensure the strength and lasting performance. Extra length on each leg of the wrench
offers better leverage and easy access to hard-to-reach bolts. 3, 4, 5, & 6mm hex and T10, T25, &
T30 torx wrenches are included in the Master Tool Kit 4.
7. Quick Link Pliers: Make fast work of pesky or stubborn chain master links. The laser cut, heat-
treated jaws feature a dual-function design allowing both installation and removal of master links.
Cushioned grips provide comfort and control. Compatible with most 6-13 speed derailleur chain
master links including SRAM® Eagle 12-speed and Flattop chains.
8. Disc Wrench: Driven by a request from mechanics in the pits every day the Disc Wrench
features 7mm and 8mm flare style box wrenches needed for the delicate hose fittings found on
hydraulic disc brakes. The compact wrench also features a disc rotor truing slot and is made from
precision laser cut tool steel.
9. Utility Knife: Stainless and aluminum construction provide a balance of low weight and durability,
ready for years of daily use. Easily operable with one hand, the folding design locks open during use
and folds to half its size, perfect in a pocket or clipped to a belt, always ready for the next job.
Standard replaceable blades are easy to find at your local hardware store.
10. Crowfoot Flare Wrench-7 & 8mm: Use with a torque wrench to accurately torque delicate
hose fittings found on hydraulic disc brakes. 1/4" square drive and 7 and 8mm flare style box
wrenches. Precision laser cut and heat treated tool steel for strength and lasting performance. Use
the Crowfoot Flare Wrench on any 1/4" drive torque wrench to ensure accurate torque on delicate
disc brake compression fittings. A perfect add-on for our Demi Torque Wrench.
11. Splined BB Socket-3/8” Drive: The updated Splined Bottom Bracket Socket features a square
3/8" drive. The socket also works with Pedro's snap-channel Pro Socket Handle, 24mm socket or
wrench, or in a bench vise. For tough bottom bracket jobs, pair with included BB Socket Holder II
(#23) designed to help hold the Splined Bottom Bracket Socket in place. The 20-tooth pattern fits a
variety of cartridge style bottom brackets that feature square taper, Octalink®, ISIS Drive™, and
other similar spindles including models from FSA®, Shimano®, Truvativ®, Race Face®, and others.
12. 8mm Hex Driver II: The 8mm hex pedal/crank driver was specifically designed for quick-and-
easy pedal and crank installation and removal. Features include a smaller diameter ergonomic dual-
density screw driver handle for improved clearance, comfort and control, a new extra long 27cm hex
key for exceptional leverage, a second ball end for quick and easy installation or removal, and heat-
treated S2 tool steel construction for the ultimate in strength and lasting performance.
13. Tire Levers: No tool kit is complete with our award winning, universally loved tire levers
featuring molded box construction and a proprietary plastic composite blend that makes them the
strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the
slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and
helpful dual spoke hooks makes removal of even the tightest tires a simple task. Also great for
spreading disc brake pistons and using as a spoon in a pinch.
14. T-Handle Bit Drive: The T-Handle Bit Drive is a versatile, lightweight, 1/4" hex bit drive tool
with in-handle bit storage. Store up to four standard 1/4" hex bits inside the handle plus one in the
magnetic bit drive, or add the compatible Multi-Torque Bit Set to store eight additional bits on board.
15. Ratcheting Combo Wrenches - 9 & 10mm Sizes: The Ratcheting Combo Wrenches are
beautiful, compact, and durable spanner wrenches. The forged and polished wrenches feature a
convenient combination of six point, 72-tooth ratchet box-end and offset open-end.
16/17. L Hex Set and L Torx Set: The Pedro's L Torx Wrenches are made from heat-treated
SNCM-V alloy steel to ensure superior strength and lasting performance. They feature extra length
for better leverage and easy access and handling of hard-to-reach bolts. The L Hex Set includes: 1.5,
2, 2.5, 3, 4, 5, 6, 8 & 10mm hex sizes. The L Torx Set includes: T10, T15, T20, T25, T27, T30, & T40
sizes.
18. Freewheel Socket, Multi-Speed 12-Spline x 23mm: Professional quality and precision
sized for the perfect fit. Fits Shimano®, Sun Race®, Sachs®, and other 12 spline, 22.7mm diameter 5
–10 speed freewheels and all Campagnolo® cassette lockrings and Record™, Chorus™, Centaur™,
and Athena™ bottom brackets. Pair with the Pro Travel Pedal Wrench or Adjustable Wrench. Also
great with our Pro Socket Handle, a 24mm socket or wrench, or in a bench vise.
19. Pro Cassette Lockring Socket w/ Pin: The Pro Cassette Lockring Socket begins as a solid
piece of alloy tool steel, then is fully machined to precise tolerances for an exacting fit you won't
find anywhere else, and finally is optimally heat treated for maximum strength and longevity.
Designed with the professional mechanic in mind, we included both a 5mm guide pin and a
removable aluminum 12mm pin held in place magnetically and easily removed with a satisfying
precision-fit "pop". The extra-deep splines ensure superior engagement while the quick spin knurling
provides speed and control. Use on your Grande Torque Wrench for proper torque or use with
our Pro Socket Handle or Equalizer Pedal Wrench to remove that stubborn lockring requiring a
little extra leverage.
20. Hex Bit Set: Bits are made from premium S2 tool steel for strength and lasting performance.
Pair with the Fixed Torque, T-Handle Bit Drive, or Pro Bit Drivers for a wide variety of tasks. The
set includes longer 50mm bits in key sizes, to ensure compatibility and fit with all components where
standard 25mm bits fall short. Set includes: 1/4" Hex Bits (1" Length): JIS #1 PH, JIS #2 PH, 5mm
FLAT BLADE, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm hex, T10, T15, T20, T25, T30 torx, & 1/4" hex
to 1/4" square bit adapter. 1/4" Hex Bits (2" Length): 4mm & 5mm hex & T25 & T30 torx.
21. External Bottom Bracket Socket, 16x44: Pair with the Pro Travel Pedal Wrench or
Adjustable Wrench. Also great with our Grande Torque, Pro Socket Handle, a 24mm socket or
wrench, or any with any square 3/8" drive. Professional quality, precision sized for the perfect fit.
Fits the common 16-notch x 44mm external bearing bottom bracket cups including Shimano® BB80,
BB5700, XT BB70, BB51, and previous external bearing threaded cups. Also fits many external
threaded types for Campagnolo®, Chris King, FSA MegaExo, Hope, SRAM/Truvativ GXP, Race Face
X-type, Surly, Wheels, and others. Will also fits disc brake rotor lockrings with 16 external notches
and Shimano® TL-FC24 and TL-FC25 adapters.
22. BB Socket Holder II: If you have even battled with an over-tightened Shimano® and ISIS
Drive® splined bottom bracket cup, you know why Pedro's created the BB Socket Holder. Though
these types of bottom brackets proved themselves as the standard for years, the tendency for these
shallow splines to slip during removal or installation has resulted in more than a few expletives, high
frustration levels, and worst of all, injuries. The Pedro's BB Socket Holder II provides a simple, shop
quality tool that solves this problem. The new design works on bottom brackets spindles with M8,
M12, or M15 threads and adds spring preload for increased flexibility and rotation during use. Best
buds with the Splined BB Socket (#11).
23. Compact Crank Puller Professional quality, precision fit crank puller for properly removing
press fit square taper or splined cranks. The Crank Remover is made from heat-treated tool steel
for strength and lasting performance and features a floating tip design for easy crank removal. Design
includes two tip inserts and fits all cranks using 22mm x 1 threads with square taper or splined
bottom bracket spindles. Pair with the Pro Travel Pedal Wrench (#1) or any other 15mm wrench.
24. Adjustable Wrench: Features include an innovative jaw design which prevents damage to
fasteners and opens to 33mm, an ergonomic, soft-plastic, TPR handle offering comfort, leverage, and
easy handling, laser engraved sizing scale and proper usage direction arrows for simple operation, an
optimized forged chrome vanadium body providing strength and lighter weight, and 10" (250mm)
length for the perfect blend of leverage and portability.
25. Pro Chain Whip: Pedro's Pro Chain Whip takes inspiration from our beloved Vise Whip,
applying many of the same functional principles to a more traditional chain whip design. The
innovative chain retention hook locks tool onto cassette, ensuring full chain wrap and eliminating
slippage. Tool geometry offers maximum effective leverage and compact 270mm length. Compatible
with all multi-gear cassettes including most 13-Speed. Chain retention hook fits cogs up to 18 teeth.
Integrated fixed gear lockring wrench optimized for 41-42mm OD lockrings. Visit pedros.com/
chainfit for latest compatibility.
26. Needle Nose Pliers: Feature a compact 6" (150mm) length, forged and heat-treated steel
construction, and ergonomic dual-density grips. The self-opening jaws provide a full-featured profile,
ready for gripping, crimping, and cutting tasks.
27. Pro Chain Tool 3.2: Features include our patented retracting pin guide (RPG) for superior functionality and reliability, peening bit
and backer for installation of Campagnolo® 11,12, & 13 speed chains, and integrated guide pin shear slot to quickly remove guide
sections from installation pins. Fits single speed through 13 speed chains and beyond including SRAM® Flattop chains.
Visit pedros.com/chainfit for latest compatibility.
28. Pro Spoke Wrench Set: The dual-sided design, with both 3-side and 4-side openings, features a reversible handle. When using
either wrench opening, the sculpted plastic handle fits perfectly in your fingers and positions them for ideal leverage and control. The
wrench is investment cast, heat-treated steel ready for years of service and the precision-cut openings are perfectly sized for fit and
speed. Includes 3.23, 3.30, and 3.45 size wrenches.
29. Chain Checker Plus II: Checking your chain for wear is one of the simplest things any cyclist can do to maintain drivetrain
performance and minimize maintenance costs. The Pedro's Chain Checker Plus II makes this task quick and easy offering a simple check
of 0.5% and 0.75% chain wear. To ensure the maximum life from your chain and accuracy of measurement, the tool employs a three-
point design which properly isolates pin wear from roller wear. The Chain Checker Plus II also includes a chain hook tool, perfect for
simplifying chain removal and installation, and a chainring nut wrench, essential for removal and installation of chainrings. Works on 1-13
speed chains. Chain wear tool approved by SRAM® for use on EAGLE® 12-speed and Flattop chains.
30. Tape Measure: Perfect to tackle any bike measure task. Features a compact design and small details that make a difference. Our
instant locking design is the opposite of most tape measures on the market and is truly handy when trying to juggle a bike, tools, and
make a measurement at the same time.
31. Downhill Tire Lever: Features heat-treated tool steel construction for unmatched strength and reliability, 275mm (10.8”) length
for incredible leverage, a large shovel tip that holds tight on the bead, a smooth curved shape with polished finished to protect tires and
rims, and an ergonomic dual density screw driver style handle providing comfort and security. Also fantastic for removal of suspension
fork wiper seals.
32. Pro Chain Keeper: The original Pedro's Chain Keeper has been a favorite in the wash buckets of mechanics for decades. The new
Pro Chain Keeper carries this heritage forward to new levels featuring one-handed installation, shifting across all gears, professional duty
stainless-steel and aluminum construction, a heavy-duty solvent resistant plastic pulley, and 12mm thru axle compatibility.
33. Fixed Torque Driver 5Nm: Pedro's Fixed Torque Drivers are shop quality preset torque wrenches designed with an infinite
torque-limiting clutch design to eliminate over-torquing of critical parts. Each wrench is calibrated using a torque calibration analyzer
accurate to +/- 1 percent and is then tested 5 times prior to packaging with results recorded on the product card along with the date. A
magnetic socket drive accepts standard 1/4" hex bits and 4mm, 5mm, and T25 bits are included with each wrench. The ergonomic handle
design provides comfort and control ready for daily use while also storing two extra bits.
34. Pro Bit Drivers: Designed for speed, precision, control, and versatility the Pro Bit Driver is ideally suited to assembly and tuning,
and easily adapts to different tasks. Features precision S2 tool steel bits, machined aluminum body, ¼” magnetic hex bit drive, and bearing
-mounted rotating end cap. Two bits store inside. The Master Tool Kit includes the Pro Bit Driver - JIS PH #1, JIS PH #2, 5mm Flat Blade
and Pro Bit Driver - 2 & 2.5mm Hex, T25 Torx models.
35. Crank Adjusting Cap Driver: Used to install and remove adjusting caps of Shimano Hollowtech II crank/bottom bracket systems.
The unique, dual-density, screwdriver handle provides improved ergonomics and comfort while assisting in control of torque applied to
the cap. Precision laser-cut tool bit is made from heat-treated tool steel for strength and durability.
  • Page 1 1
  • Page 2 2

PEDRO S 4.0 Master Tool Kit User guide

4.0 Master Tool Kit
Brand
PEDRO S
Model
4.0 Master Tool Kit
Category
Bicycles
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents