ALPATEC RSB 24 User manual

Brand: ALPATEC

Model: RSB 24

Category: Toy parts

Type: User manual

ALPATEC RSB 24 offers three power levels: fan only, low heat (1100W), and high heat (2400W). Select the desired heat level with the power mode selector. Set your desired room temperature using the adjustable thermostat with indicator light. The appliance will automatically maintain the set temperature. Safety features include overheat protection and a tip-over switch.

NOTICE D’UTILISATION

RSB 24

RADIATEUR SOUFFLANT

Fan heater

notice RSB 24:notice RC_20ET 9/04/09 11:18 Page 2

Page is loading ...

CAUTION

PLEASE READ ALL THESE INSTRUCTIONS CAREFULLY BEFORE USING THIS APPLIANCE.

• Make sure that the voltage rating on the type plate corresponds to your main voltage. Any error in

connecting the appliance invalidates the guarantee.

• This appliance is not intended for use by persons (including children) with reduced physical,sensory

or mental capabilities, or lack of experience and knowledge, unless they have been given supervision

or instruction concerning use of the appliance by a person responsible for their safety. Children

should be supervised to ensure that they do not play with the appliance.

• Keep out of children and do not allow them to operate this appliance.

• Only use the appliance for domestic purposes and in the way indicated in these instructions.

• From time to time, check the cord for damages. Never use the appliance if cord or appliance show

any sign of damage.

• Never immerse the product in water or any liquid for any reasons.

• It is not recommended to use this appliance in humid ambient as bathroom…

• Do not use the appliance outdoors.

• Do not use if you have wet hands.

• Do not cover the appliance. Do not put cloth on the appliance.

• Warning! The appliance is warm when in use. Use the handle.

• Keep combustible materials such as drapes, clothing, towels… at least 3 feet away from the appliance

• Never move or range the appliance by pulling the cord.

• Unplug the appliance before cleaning or replacement of any parts.

• Do not clean the appliance with abrasive chemicals.

• Never use accessories that are not recommended or supplied by the manufacturer. It could

constitute a danger to the user and risk to damage the appliance.

• All interventions made by a non-qualified person can be dangerous; in this case guarantee conditions

would be cancelled. As all electrical products, a competent electrician must repair it.

• Never insert metallic object through the grid.

• When the appliance is not use for a long time, protect it from dust and moist.

• Keep a minimum space of 50 cm from the wall.

• Do not use near flammable gas and dust.

• Should the heater not be used for a long period, pack it to prevent dust entering and place it in dry

and well ventilated place.

• Do not insert any conductive article inside the front or the back nets, to avoid any electric shock.

THE MANUFACTURER WILL NOT ASSUME ANY RESPONSABILITY IN CASE OF NON ADHERENCE

TO THESE INSTRUCTIONS. SAVE THIS USER MANUAL CAREFULLY.

ENGLISH

For your comfort and safety, ALPATEC has checked all the steps

of manufacturing. The products have been made for you to enjoy

their design and easiness to use.

ALPATEC, a complete range of air conditioners, coolers, fans and

heaters for you to be completely satisfied.

notice RSB 24:notice RC_20ET 9/04/09 11:18 Page 8

PARTS LIST

1.- Adjustable thermostat

2.- Power mode selector

3.- Operating light indicator

4. - Net cover

5.- Transport handle (not shown)

6.- Power cord (not shown)

CARACTERISTIQUES :

Model RSB 24

Voltage 220-240 V – 50 Hz

Maximum power 2400 W

Class II

Protection IP21

Bathroom using.

notice RSB 24:notice RC_20ET 9/04/09 11:18 Page 5

USING

Place the heater on a flat and dry surface and plug in it.

MODE SETTING :

- Turn the power mode selector clockwise to choose the mode setting.

Position I : Fan function

Position II : low power heating (1100 W)

Position III : high power heating (2400 W)

- The operating light indicator lights when the appliance is in use.

- To switch off the appliance, turn the power mode selector on O position.

TEMPERATURE SETTING :

- Set the thermostat to maximum position. The light indicator comes on.

- When the room is at the required temperature, slowly turn the thermostat anticlockwise until the

fan goes off. The appliance will now switch on and off automatically to keep the room at the desired

temperature.

- For antifrozen function, set power I or II and turn the thermostat to min to put

A in front of the visual

mark. When room temperature goes down 4°C, the appliance will automatically starts in order to keep

this temperature.

AUTOMATIC CUT-OFF :

This appliance is equipped with an automatic cut-off device in case of overheating or fall.

CLEANING

- Switch off and unplug the appliance.

- The dust may be removed with a soft cloth or a vacuum cleaner.

- Clean the body with a soft, dry cloth (never immerse appliance in water), do not allow water to run

into the interior of the heater.

- When the heater is not used for a long time, protect it from dust and dry.

notice RSB 24:notice RC_20ET 9/04/09 11:18 Page 4

Page is loading ...

ALPATEC RSB 24 User manual

Brand: ALPATEC

Model: RSB 24

Category: Toy parts

Type: User manual

Download PDF

report

in other languages

français: ALPATEC RSB 24 Manuel utilisateur

ALPATEC RSB 24 User manual

ALPATEC RSB 24 User manual

in other languages

Related papers

Other documents