Polaroid PiMX922 User manual

Brand: Polaroid

Model: PiMX922

Category: Docking speakers

Type: User manual

Polaroid and Polaroid & Pixel are trademarks of PLR IP Holdings; LLC, used

under license. All other trademarks are property of the respective owner, who

has not sponsored, endorsed or approved this product. PLR IP Holdings, LLC

does not manufacture this product or provide any Manufacturer’s Warranty or

support. This product is manufactured, distributed and sold by Starlight

Marketing (H.K.) Ltd.

Product features, specifications, and appearances are subject to change

without notice.

Changes are periodically made of this document. Changes, technical

inaccuracies, and typographic errors will be corrected in subsequent editions.

For service, support, and warranty information, visit www.polaroid.com

PLR IP Holdings, LLC, its licensees and affiliates, fully support all electronics

waste initiatives. As responsible stewards of the environment, and to avoid

violation established laws, you should properly dispose of this product in

compliance with all applicable regulations, directives or other governances in

the area where you reside. Please check with local authorities or the retailer

where you purchased this product to determine a location where you can

appropriately dispose of the product.

You may also go to www.polaroid.com and reference About/Electronic

Recycling to learn more about the specific laws in your area and to locate a

collection facility near your home.

Warning and Precautions

WARNING

To prevent fire or shock hazards, do not expose this appliance to rain or moisture.

The apparatus should not be exposed to dripping or splashing and that no object

filled with liquids such as vases shall be placed on the apparatus.

The ventilation should not be impeded by covering the ventilation openings with

items such as newspapers, table cloths, curtains, etc.

No naked flame sources such as lit candles should be placed on the apparatus.

The main plug is used as the disconnect device, the disconnect device shall remain

readily operable. In order to disconnect the apparatus from the mains completely,

the plug should be disconnected from the mains socket outlet completely.

CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG

WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE PLUG

CAN BE FULLY INSERTED WITHOUT EXPOSING ANY PARTS OF THE BLADES.

The lightning flash with

arrowhead symbol, within an

equilateral triangle, is

intended to alert the user to

the presence of uninsulated

“dangerous voltage” within

the product’s enclosure that

may be of sufficient

magnitude to constitute a risk

of electric shock to persons.

WARNING; TO REDUCE THE

RISK OF ELECTRIC SHOCK, DO

NOT REMOVE COVER (OR

BACK). NO USER-SERVICEABLE

PARTS INSIDE, REFER

SERVICING TO QUALIFIED

PERSONNEL.

The exclamation within an

equilateral triangle is intended to

alert the user to presence of

important operating and

maintenance (serving)

instructions in the literature

accompanying the appliance.

Important

Since the CD circuitry may cause interference to other radio tuners nearby, switch

this unit off when not in use or move it away from affected radio tuner.

(1)This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesirable

operation.

These limits are designed to provide reasonable protection against harmful

interference in a residential installation.

Caution: Changes or modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

E-1

Warning and Precautions

This appliance generates uses and can radiate radio frequency energy and if not installed and used

in accordance with the instructions, may cause harmful interference to radio communication.

However, there is no guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception, which can be

determined by tuning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following:

Reorient or relocate the receiving antenna

Increase the separation between the equipment and receiver

Connect the equipment into an outlet on circuit different from that to which the receiver is

connected

Consult the dealer or an experienced radio/TV technician for help

This Class B appliance complies with Canadian ICES-003

IMPORTANT SAFETY INSTRUCTIONS

-Read before operating

This product was designed and manufactured to meet strict quality and safety standards. There

are, however, some installation and operating precautions which you should be particularly aware

of.

1. Read instructions- All the safety and operating instructions should be read before the

appliance is operated.

2. RETAIN INSTRUCTIONS- The safety and operating instructions should be retained for future

reference.

3. HEED WARNING- All warnings on the product and in the operating instructions should be

adhered to.

4. FOLLOW INSTRUCTIONS- All operating and use instruction should be followed.

5. CLEANING- Unplug this product from the wall outlet before cleaning. Do not use liquid

cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Exception: A product that is meant for uninterrupted service and that for some specific reason,

such as the possibility of the loss of an authorization code for a CATV converter, is not intended to

be unplugged by the user for cleaning or any other purpose, may exclude the reference to

unplugging the product in the cleaning description otherwise required in 131.8(5)

6. ATTACHMENTS- Do not use attachments not recommended by the product manufacturer as

they may cause hazards.

7. WATER AND MOISTURE- Do not use this product near water-for example, near a bath tub,

wash bowl, kitchen sink, or laundry tub; in a wet basement or near a swimming pool and the

like.

8. ACCESSORIES- Do not place this product on an unstable cart, stand tripod, bracket, or table.

The product may fall causing serious injury to a child or adult and serious damage to the

product. Use only cart, stand, tripod, bracket, or table recommended by the manufacturer, or

sold with the product. Any mounting of the product should follow the manufacturer’s

instructions, and should use a mounting accessory recommended by the manufacturer.

E-2

Warning and Precautions

9. A product and cart combination should be moved with care. Quick stops, excessive force, and

uneven surfaces may cause the appliance and cart combination to overturn.

10. VENTALATION- Slots and openings in the cabinet are provided for ventilation and to ensure

reliable operation of the product and to protect it from overheating and these openings must

not be blocked or covered. The opening should never be blocked by placing the product on a

bed, sofa, rug, or other similar surfaces. This product should not be placed in a built-in

installation such as a bookcase or rack unless proper ventilation is provided or the

manufacturer’s instructions have adhered to.

11. POWER SOURCES- This product should be operated only from the type of power source

indicated on the marking label. If you are not sure of the type of power supply to your home,

consult your product dealer or local power company. For products intended to operate from

battery or other sources refer to operating instruction.

12. GROUNDING OR POLARIZING- This product may be equipped with a polarized alternating

current line plug (a plug having one blade wider than the other). This plug will fit into the power

outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the

outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace

your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug.

Alternative Warning- This product is equipped with a three-wire grounding-type plug, a plug having a

third (grounding) pin. This plug only fit into a grounding-type power outlet. This is a safety feature. If

you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete

outlet. Do not defeat the safety purpose of the grounding-type plug.

13. POWER-CORD PROTECTION- Power supply cords should be routed so that they are not likely to

be walked on or pinched by items placed upon or against them, paying particular attention to

cords at plugs, convenience receptacles and point where they exit from the appliance.

14. PROTECTIVE ATTACHMENT PLUG- The product is equipped with an attachment plug having

overload protection. This is a safety feature. See instruction Manual for replacement or resetting

of protective device. If replacement of the plug is required be sure the service technician has

used a replacement plug specified by the manufacturer that has used the same overload

protection as the original plug.

15. Lightning- For added protection for this product during a lightning storm, or when it is left

unattended and unused for long periods of time, unplug the wall outlet and disconnect the

antenna or cable system. This will prevent damage to the product due to lightning and power-

surges.

16. POWER LINES- An outside antenna system should not be located in the vicinity of overhead

power lines or other electric light or power circuits, or where it can fall into such power lines or

circuits. When installing an outside antenna system, extreme care should be taken to keep from

touching such power lines or circuits as contact maybe fatal.

17. OVERLOAD- Do not overload wall outlets, extension cords, or integral convenience receptacles

as this can result in a risk of fire or electric shock.

E-3

Warning and Precautions

18. OBJECT AND LIQUID ENTRY- Never push objects of any kind into this product through

openings as the may touch dangerous voltage points or short-out parts that could result in a

fire or electric shock. Never spill liquid of any kind on the product.

19. SERVICING- Do not attempt to service this product yourself as opening or removing covers

may expose you to dangerous voltage or other hazards. Refer all servicing to qualified

service personnel.

20. DAMAGE REQUIRING SERVICE- Unplug this product from the wall outlet and refer servicing

to qualified service personnel under the following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the product.

c. If the product has been exposed to rain or water.

d. If the product does not operate normally by following the operation

instructions. Adjust only those controls that are covered by the operating

instructions as an improper adjustment of other controls may result in

damage and will often require extensive work by a qualified technician to

restore the product to its normal operation.

e. If the product has been dropped or damaged in any way.

f. When the product exhibits a distinct change in performance- this indicates a

need for service.

21. REPLACEMENT PARTS- When replacement parts are required, be sure the service

technician has used replacement parts specified by the manufacturer or have the same

characteristics as the original part. Unauthorized substitutions may result in fire, electric

shock or other hazards.

22. SAFETY CHECK-Upon completion of any service or repairs to this product, ask the service

technician to perform safety checks to determine that the product is in proper operating

condition.

23. HEAT- The product should be situated away from heat sources such as radiators, heat

registers, stoves or other products (including amplifiers) that produce heat.

E-4

In the Box/Introduction

PiMX922 iPad/iPhone/iPod docking station

AC Adapter Remote User Aux Input

Manual Patch Cord

If any items are missing or damaged contact

Polariod Customer Service.

Your PiMX922 is a docking system for iPad - iPhone and iPod touch and is powered by

the supplied AC adapter.

An Aux input provides additional connectivity for other iPod models and other personal

audio equipment.

Compatibility

Your PiMX922 is recommended for use with iPad - iPhone or iPod touch models. Within

the text of this user guide, “iPad” refers to iPad - IPhone and iPod touch models. Other

models of iPods and personal audio devices may be connected by cable to the Aux in jack

on the back panel. You can control the unit by the iPad controls, remote control or the

touch pad on the unit.

“ Made for iPad” and “iPhone” and “iPod ”

means that an electronic accessory has been designed to connect specially to iPad, iPod

or iPhone respectively, and has been specified by the developer to meet Apple

performance standards. Apple is not responsible for the operation of this device or its

compliance with safety and regulatory standards.

IPad, iPod and iPhone are trademarks of Apple inc. registered in the U.S. and other

countries.

E-5

Location of Controls

Front View

E-6

1. iPad/iPhone/iPod docking connector

2. Input Source selector

3. Previous track selector

4. Play / Pause

5. Next track selector

6. Volume down

7. Volume up

8. Light to indicate status

- Standby / flashing red light

- Aux input / green light

- iPad-iPhone-iPod / orange light

9. IR sensor – remote receiver

Location of Controls

Rear View

10. Power input (insert AC adapter cord)

11. On/Off switch

12. Aux input jack 3.5 mm

E-7

Remote

1. Standby button/push for standby mode and push again to play

2. Vol Up / Volume up

3. iPad button/changes the source between iPad-iPhone – iPod

4. Plays previous or skips to back tracks

5. Vol Down / Volume down

6. Treb + / increases treble

7. Treb - / reduces treble

8. Down / controls the menu down

9. Menu / press to enter the menu

10. Default / to restore factory settings

11. Mute / to mute the sound

12. AUX / to switch source aux input

13. Play-Pause /to play or pause the unit

14. Skips to next track

15. Bass + / increases bass

16. UP / controls the menu up

17. Bass - / increases bass

18. Enter / to enter the iPad-iPhone-iPod menu

E-8

General Operation

Connect AC adapter and put the On/Off button to the on position.

To play music connect iPad/iPhone/iPod to the docking station and push

the iPad button or use the on the touch panel of your PiMX922.

iPad must be in the on position

While unit is playing it will also charge when your iPad is in the docked

postion

E-9

Using the Controls

To adjust the volume use the remote and push the Vol +/- on the remote or

use the V+ / V- on the PiMX922 touch pad to lower or increase the Volume.

Press the , , , on either the remote or touch panel of the PiMX922

for play or pause / to search forward / to search for previous track

or other back tracks.

E-10

Using the Controls

Press menu to access the menu of iPad/iPhone/iPod

Use control buttons to navigate the menu

Press the Treb + / Treb – and Bass + / Bass - on the remote to adjust

Treble and Bass

Press the default button on remote to reset the factory settings. Press the

to mute the unit and press again to cancel mute.

E-11

Using the Controls

Press Standby to put the unit in Standby mode, the light indicator will be red.

Turn the unit off before you remove the iPad / iPhone / iPod

You can connect an external audio device through AUX input by the 3.5mm

audio patch cable, if the unit is not connected to an iPad / iPhone / iPod the

unit plugged in through the Aux input will automatically play.

E-12

Technical Specifications

Product Name: Digital Active Speaker

Model number: PiMX922

Frequency response: 60Hz – 20KHz

Amplifier output power : Left/Right 3.5W x 2

Subwoofer : 12W x 1

Amplifier Input sensitivity:

400mV

Amplifier SNR :

70dB

Amplifier distortion:

1 %

Speaker units: tweeter 39mm x 2, subwoofer 102mm x 1

iPad / iPhone : rated terminals 2.1A

E-13

Warranty

LIMITED WARRANTY

We at Cosmo believe you will be pleased with your new Polaroid Product. Please read this

Warranty carefully. Should you find your unit is not operating properly, Cosmo will provide

you the following options (at Cosmo’s discretion), providing the manufacturing defect is

verified along with the date and proof of purchase.

1 Year Warranty

To obtain Warranty Service and Trouble shooting information online

visit our website at www.polaroid.com or contact Polaroid’s Consumer Care

Centers listed below:

Polaroid Service Centre : Canada 1-888-208-4108

CUSTOMER OBLIGATIONS

This warranty applies to the product from the original date of purchase at retail. Therefore,

the owner must provide a copy of the original, dated bill of sale. No warranty service will be

performed without a bill of sale. Transportation to the Service Depot is the responsibility of

the owner. Return of product will be pre-paid for by Cosmo Service Depot.

This warranty is void if the product is:

A) Damaged through negligence, abuse, misuse, accident or acts of God.

B) Used in commercial applications or rentals.

C) Modified or repaired by anyone other than COSMO or their expressly

authorized representative.

D) Damage resulting from the improper connection to equipment of other

manufacturers.

This warranty does not cover:

A) Damage or improper operation caused by the failure to follow the operating

instructions provided with the product.

B) Routine adjustments to the product that can be performed by the customer

as outlined in the owner’s manual.

C) Damage to DVD, Compact disc or MP3 Device.

D) Signal reception problems caused by external factors.

E) Products not purchased in Canada.

F) Damage to the products used outside Canada.

Warranty

THIS WARRANTY IS NON-TRANSFERABLE AND APPLIES SOLELY TO THE ORIGINAL

PURCHASER AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE

PRODUCT. ANY APPLICABLE IMPLIED WARRANTIES, INCLUDING THE WARRANTY

OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A PERIOD OF THE

EXPRESSED WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF THE

ORIGINAL PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESSED OR

IMPLIED SHALL APPLY TO THE PRODUCT THEREAFTER. COSMO MAKES NO

WARRANTY AS TO THE FITNESS OF THE PRODUCT FOR ANY PARTICULAR

PURPOSE OR USE.

THE EXTENT OF COSMO’S LIABILITY UNDER THIS LIMITED WARRANTY IS THE

REPAIR OR REPLACEMENT PROVIDED ABOVE AT THE SOLE DISCRETION OF

COSMO AND IN NO EVENT WILL COSMO’S LIABILITY EXCEED THE PURCHASE PRICE

PAID BY THE PRUCHASER. UNDER NO CIRCUMSTANCES SHALL COSMO BE LIABLE

FOR ANY LOSS, DIRECT, INDIRECT, INCIDENTAL FORESEEN, UNFORESEEN,

SPECIAL OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH

THE USE OF THIS PRODUCT.

THIS WARRANTY IS VALID ONLY IN CANADA. THIS WARRANTY GIVES YOU SPECIFIC

LEGAL RIGHTS. HOWEVER, YOU MAY HAVE OTHER RIGHTS, WHICH MAY VARY

FROM PROVINCE TO PROVINCE. SOME PROVINCES DO NOT ALLOW LIMITATIONS

ON IMPLIED WARRANTIES OR EXCLUSION OF CONSEQUENTIAL DAMAGE,

THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO YOU.

THIS INSTRUCTION BOOK MAY CONTAIN ERRORS AND OMISSIONS.

DESIGN AND SPECIFICATION ARE SUBJECT TO CHANGE WITHOUT NOTICE.

Service Centre Address:

Cosmo / Polaroid Service Centre

55 Travail Road Unit 2

Markham, Ontario

L3S 3J1.

commerce de PLR IP Holdings; LLC, utilises sous license. Toutes les autres

marques de commerce sont la propriété de leurs propriétaires respectifs qui

n’ont pas commandité, endossé ou appouvé ce prodduit. PLR IP Holdings, LLC

n’est pas le fabricant de ce produit ne fournit pas de garantie ou d’assistance

du fabricant. Ce produit est fabriqué, distribute et vendu par dist Starlight

Marketing (H.K.) Ltd.

Les caractéristiques, les specifications, et l’apparence de ce produit sont

sujettes à changement sans préavis.

Des modification sont apportées périodiquement à ce document. Les

changements, inexactitudes techniques et erreurs typographiques seront

corrigés dans des é ultérieures. Pour plus de renseignements concernant l’en

PLR IP Holdings, LLC, ses licenciés et affiliés, soutiennent pleinement

l’ensemble des initiatives des déchets électroniques. En tant que gardiens

responsables de l'environnement, et afin d’éviter toute violation des lois

établies, vous devez éliminer ce produit correctement et conformément à toutes

les réglementations, directives ou autres gouvernances applicables dans votre

région de résidence. Veuillez consulter les autorités locales ou le revendeur où

vous avez acheté ce produit pour déterminer l’endroit où vous pouvez éliminer

ce produit d’une manière appropriée.

Vous pouvez aussi visiter le site Web www.polaroid.com et consulter la page À

Propos/Recyclage Électronique (About/Electronic Recycling) pour davantage

de renseignements sur les lois spécifiques votre région et our localiser un

centre de collecte près de chez vous..

Avertissements et precautions

Avertissement

Pour éviter les risques d’incendie ou de chocs électrques, n’exposez pas cet

appareil â la pluie ou â l’humidité.

L’apparell ne devrait pas être exposéaux gouttes ou aux éclaboussures et aucun

objet rempli de liquide, tels que des vases, ne devrait placé l’appareil.

La ventilation ne devrait pas être bloquére bloquére en recouvrant les orifices les

de ventilation avec tels que des journaux, napppes, rideaux, etc.

Auccune source de flammes nues, telle que des bougies allumées, ne devrait être

placée sur l’appariel.

La prise principale est utilisée comme dispositif de disjonction. Le dispositif doit

rester facilement accessible.

Afin de débrancher l’appareil complètement du la prise de courant, la prise

principale doit être débranchée de la prise Principale complètement.

ATTENTION

POUR ÉVITER UN CHOC ÉLECTRIQUE, N’UTILISEZ PAS CETTE FICHE (POLARISÉE)

AVEC UN FIL DE RALLONGE, UNE PRISE OU AUTRE SORTIE, À MOINS QUE LA FICHE

PUISSE ÊTRE ENTIÉREMENT INSÉREE SANS EXPOSER UNE PARTIE DES LAMES.

Le signe d’éclair avec une pointe

de flèche Եl à l’intérieur d’un

triangle équilatéral est conçu

pour avertir l’utilisateur de la

présence d’une tension

dangereuse non isolée à

l’intérieur de l’enceinte de cet

appareil, qui peut avoir une

magnitude suffisante pour

constituer un risque de choc

électrique à toute personne.

AVERTISSEMENT: POUR RÉDUIRE

LE RISQUE DE CHOC ÉLECTRIQUE,

NE PAS ENLEVER LE COUVERCLE

(OU L’ARRIÈRE). AUCUNE PIÈCE

POUVANT ÈTRE RÉPAREE PAR

L’UTILASATEUR NE SE TROUVE À

L’INTÉRIER,SE RÉFÉRER ÀDU

PERSONNEL DE RÉPARATION

QUALIFIÉPOUR RÉPARER CET

APPARIEL.

Le point d ’exclamation à

l’intérieur d’un triangle

équilatéral est conçu pour

avertir l’utilisateur de la

présence d’instructions de

fonctionnement et

d’entretien (service)

importantes dans la

documentation qui

accompagne cet appareil.

IMPORTANT :Le circuit CD risquant de causer du brouillage à d’autres syntoniseurs

radio situés à proximité, éteignez cet appareil lorsqu’il n’est pas utilisé ou placez-le

du syntoniseur radio affecté.

F-1

Page is loading ...

Polaroid PiMX922 User manual

Brand: Polaroid

Model: PiMX922

Category: Docking speakers

Type: User manual

Download PDF

report

in other languages

français: Polaroid PiMX922 Manuel utilisateur

Polaroid PiMX922 User manual

Polaroid PiMX922 User manual

in other languages

Related papers

Other documents