Texas Instruments TLV320AIC3262EVM (Rev. A) User guide
- Type
- User guide
User's Guide
SLAU386A–January 2012–Revised March 2012
TLV320AIC3262EVM-U Evaluation Module
This user’s guide describes the operation, use, features, and characteristics of the TLV320AIC3262EVM-
U. This small form factor evaluation module (EVM) is a programmable USB audio device that features the
TLV320AIC3262 Audio Codec with miniDSP.
Contents
1 EVM Overview ............................................................................................................... 2
1.1 Features ............................................................................................................. 2
1.2 Introduction ......................................................................................................... 2
2 EVM Description and Getting Started .................................................................................... 3
2.1 TLV320AIC3262EVM-U Hardware Description ................................................................ 3
2.2 Getting Started ..................................................................................................... 4
3 AIC3262 Control Software ................................................................................................. 6
3.1 AIC3262EVM CS Setup ........................................................................................... 6
3.2 Using the AIC3262EVM-U CS ................................................................................... 7
4 PC Board Drawings ....................................................................................................... 12
5 TLV320AIC3262EVM-U Schematic ..................................................................................... 15
6 TLV320AIC3262EVM-U Bill of Materials ............................................................................... 23
7 Default Jumper Positions ................................................................................................. 28
8 Writing Scripts .............................................................................................................. 30
9 Example Scripts ........................................................................................................... 32
9.1 Headphone playback script ..................................................................................... 32
9.2 Microphone recording script ..................................................................................... 33
10 Related Documentation ................................................................................................... 35
List of Figures
1 Top view of TLV320AIC3262EVM-U board ............................................................................. 2
2 USB Connection ............................................................................................................ 4
3 Using Example Configurations in Control Software .................................................................... 5
4 Main Panel Window ........................................................................................................ 7
5 Example Configurations Window ......................................................................................... 8
6 TLV320AIC3262 Control Software Command-Line Window.......................................................... 9
7 Decode Window ........................................................................................................... 10
8 Register Inspector Window............................................................................................... 11
9 TLV320AIC3262EVM PCB Top ......................................................................................... 12
10 TLV320AIC3262EVM PCB Layer 2..................................................................................... 12
11 TLV320AIC3262EVM PCB Layer 3..................................................................................... 13
12 TLV320AIC3262EVM PCB Bottom Copper, Reversed............................................................... 13
13 TLV320AIC3262EVM PCB Bottom ..................................................................................... 14
14 TLV320AIC3262EVM PCB Drill Pattern................................................................................ 14
15 Schematic, Sheet 1 of 8.................................................................................................. 15
16 Schematic, Sheet 2 of 8.................................................................................................. 16
17 Schematic, Sheet 3 of 8.................................................................................................. 17
18 Schematic, Sheet 4 of 8.................................................................................................. 18
Windows is a trademark of Microsoft Corporation.
1
SLAU386A–January 2012–Revised March 2012 TLV320AIC3262EVM-U Evaluation Module
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
EVM Overview
www.ti.com
19 Schematic, Sheet 5 of 8.................................................................................................. 19
20 Schematic, Sheet 6 of 8.................................................................................................. 20
21 Schematic, Sheet 7 of 8.................................................................................................. 21
22 Schematic, Sheet 8 of 8.................................................................................................. 22
23 Default Jumper Settings Layout ......................................................................................... 29
List of Tables
1 Audio Jacks Available to Connect Analog Inputs and Outputs ....................................................... 3
2 Bill of Materials for TLV320AIC3262_YZF_USB_EVM_REV2 ...................................................... 23
3 TLV320AIC3262EVM-U Default Jumper Positions ................................................................... 28
1 EVM Overview
1.1 Features
• Full-featured, small form-factor EVM for the TLV320AIC3262 Audio Codec
• USB connection to the PC provides power, control, and streaming audio for quick and easy evaluation.
• Easy-to-use AIC3262 Control Software (CS) provides a graphical user interface to configure and
control the TLV320AIC3262.
The TLV320AIC3262EVM-U is compatible with Windows™ XP-based personal computers.
1.2 Introduction
The TLV320AIC3262EVM-U is a USB audio device with programmable inputs and outputs, effects, and
extensive routing capabilities. It is a simple platform to evaluate the TLV320AIC3262 miniDSP Audio
Codec.
Figure 1. Top view of TLV320AIC3262EVM-U board
2
TLV320AIC3262EVM-U Evaluation Module SLAU386A–January 2012–Revised March 2012
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
www.ti.com
EVM Description and Getting Started
2 EVM Description and Getting Started
2.1 TLV320AIC3262EVM-U Hardware Description
Table 1 summarizes the audio jacks available to connect analog inputs and outputs to the
TLV320AIC3262 and the switches.
Table 1. Audio Jacks Available to Connect Analog Inputs and Outputs
Designator Label Associated pin Description
J1 N/A N/A USB Mini-B jack
J2 MIC IN IN2L/IN2R Line input or electret-condenser microphone input. For Line output, W11 and W12
jumpers should be removed. To use electret-condenser microphones, install
jumpers on W11 and W12; this connects 2.2kΩ pullup resistors to MICBIAS at
both the tip and the ring.
J3 SPEAKER SPKLP/SPKLM/ Stereo Class-D Speaker Outputs
OUTPUTS SPKRP/SPKRM
J4 HP OUT HPL/HPR Headphone Output
J5 REC OUT RECP/RECM Receiver Output
J6 SAR REF VREF_SAR External voltage supply for SAR
VOLTAGE
J7 SAR IN IN1L/IN1R SAR ADC Inputs
J11 CLASS D SLVDD/SRVDD/ Connector for External Speaker Supply. To use external supply, set JP3 to 1-2
PWR INPUT SPK_V ("EXT") and JP2 to 1-2 ("EXT").
J19 LINE OUT LOL/LOR Line output. Connect only high-impedance loads to this output (e.g., external
Class-D amplifier).
SW1 RESET N/A RESET switch
SW2 APP N/A Cycles through the applications loaded in the onboard EEPROM.
SW3 PATCH N/A Cycles through the patches loaded in the onboard EEPROM.
SW4 USB_RESET N/A USB_RESET
3
SLAU386A–January 2012–Revised March 2012 TLV320AIC3262EVM-U Evaluation Module
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
EVM Description and Getting Started
www.ti.com
2.2 Getting Started
Evaluation can start right out of the box:
1. Install jumpers for TLV320AIC3262EVM-U (see Section 7 for default jumper settings)
2. Download and install the TLV320AIC3262EVM-U Control Software from the EVM product folder. The
password for installation is "CC".
3. Connect the TLV320AIC3262EVM to an available USB port. LED lights D1 and D2 should illuminate
once the EVM is detected by PC. Also in the Windows device manager, the EVM should be recognized
as “USB Composite Device”.
Figure 2. USB Connection
4. Connect stereo headphones at the headphone output (J4)
4
TLV320AIC3262EVM-U Evaluation Module SLAU386A–January 2012–Revised March 2012
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
www.ti.com
EVM Description and Getting Started
5. Open AIC3262 Control Software and select a typical headphone playback script, as shown in
Figure 3.
Figure 3. Using Example Configurations in Control Software
5
SLAU386A–January 2012–Revised March 2012 TLV320AIC3262EVM-U Evaluation Module
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
AIC3262 Control Software
www.ti.com
6. Play audio through any media playback tool on your PC. Make sure the playback setup on the PC is
through ‘”USB-miniEVM”.
To adjust playback volume, open “Sounds and Audio Devices Properties” in the control panel, and click
the Volume button of the Sound playback section of the Audio tab. Ensure that “USB-miniEVM” is selected
as the default playback and recording devices.
The following section explains the software installation procedure which allows programming of the audio
device.
3 AIC3262 Control Software
The following sections describe the operation and installation of the AIC3262 control software.
3.1 AIC3262EVM CS Setup
To install the TLV320AIC3262 EVM-U software:
1. Download the latest version of the AIC3262EVM-U Control Software (CS) located in the
TLV320AIC3262 Product Folder.
2. Open the self-extracting installation file, and extract to a known folder.
3. In that folder, install the Software by double-clicking the “CC.exe” and follow the directions. The
installation password is “CC”.
4. Connect TLV320AIC3262EVM-U to PC through USB cable and open up TLV320AIC3262 Control
Software. The software will then pop up a window called select EVM to prompt the user to choose the
correct EVM name
6
TLV320AIC3262EVM-U Evaluation Module SLAU386A–January 2012–Revised March 2012
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
www.ti.com
AIC3262 Control Software
3.2 Using the AIC3262EVM-U CS
The following sections describe the AIC3262EVM-U CS usage.
3.2.1 Main Panel Window
The Main Panel window, shown in Figure 4, provides easy access to all the features of the AIC3262 CS.
Figure 4. Main Panel Window
The main panel provides a high-level block diagram of the AIC3262. On the main panel, shown in
Figure 4, users can configure the analog input and output routings by simply clicking on the switches. The
analog setup, digital setup, audio inputs, audio outputs, DRC, AGC, SAR and headset detection provide
additional control of many other features of the AIC3262. These categories are intended for advanced
users and can be accessed by clicking “View” on the main panel. One can also click on the colored blocks
on the main panel to gain access to these categories. Left ADC and Right ADC blocks provide detailed
settings for recording path. Left DAC and Right DAC blocks provide detailed settings for playback path.
Yellow block in the middle provides settings for digital interface, which includes Audio Serial Interface
configuration, clock settings, etc.
Clicking “Refresh” button on the top will read back the current state of the AIC3262 register settings and
reflect it to the user interface. “EVM status” on the bottom part of the main panel reflects the hardware
connection of the EVM. “USB Fs” indicates the current sample rate of the EVM board.
7
SLAU386A–January 2012–Revised March 2012 TLV320AIC3262EVM-U Evaluation Module
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
AIC3262 Control Software
www.ti.com
3.2.2 Typical Configuration
AIC3262 Control Software provides example scripts to typical playback and record application. These
typical record and playback configurations can be accessed by choosing “Example Configuration…” under
View. Once the typical configuration is selected, click “ProgramCodec” to download the script into EVM.
Figure 5. Example Configurations Window
8
TLV320AIC3262EVM-U Evaluation Module SLAU386A–January 2012–Revised March 2012
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
www.ti.com
AIC3262 Control Software
3.2.3 Command-Line Interface Panel
Figure 6. TLV320AIC3262 Control Software Command-Line Window
The command-line interface provides a means to communicate with the TLV320AIC3262 using a simple
scripting language (described in the Section 8). The TAS1020B USB controller handles all communication
between the PC and the codec. A script is loaded into the command buffer, either by loading a script file
using the “open” button or by pasting text from the clipboard. Click “Run” to execute the command buffer.
All controls update their status with respect to the register contents in the following conditions:
• A panel is open
• The “Run” button in the command-line interface is pressed
• The “Refresh” button on the main panel window is pressed
9
SLAU386A–January 2012–Revised March 2012 TLV320AIC3262EVM-U Evaluation Module
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
AIC3262 Control Software
www.ti.com
One feature in the command-line interface is the “Decode” function of the script. Clicking the “Decode”
button on the command-line interface will decode the script line by line. This decode feature provides an
easy means to understand the meaning of the script without referring to the register map. The decode
content can be cleared by clicking “ClearDecode”.
Figure 7. Decode Window
Another feature in the command-line interface is the “Record” function. By checking the “Record” box, one
can record the current value of the register that is being modified. The recorded register values along with
their page numbers are displayed in the command buffer. The recorded register values can also be
decoded by clicking the “Decode” tab on the command-line interface window. The content of the
command buffer can be cleared by clicking “Clear” button.
10
TLV320AIC3262EVM-U Evaluation Module SLAU386A–January 2012–Revised March 2012
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
www.ti.com
AIC3262 Control Software
3.2.4 Register Inspector Table
Figure 8. Register Inspector Window
The contents of TLV320AIC3262 register map can be accessed through the Register inspector table. The
“Page” number control selects the page to be displayed in the register table. The register table contains
information such as register name, current register value and the bit field of the current register value.
While using the register inspect table, user should first specify the page number. Once the page is
specified, user can inspect or change the register value by either entering the hex value of the register or
changing the corresponding bits for that register.
11
SLAU386A–January 2012–Revised March 2012 TLV320AIC3262EVM-U Evaluation Module
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
PC Board Drawings
www.ti.com
4 PC Board Drawings
The working dimensions of the PCB as shown below are 165mm × 91.4mm (6.5 × 3.6 inches).
Figure 9. TLV320AIC3262EVM PCB Top
Figure 10. TLV320AIC3262EVM PCB Layer 2
12
TLV320AIC3262EVM-U Evaluation Module SLAU386A–January 2012–Revised March 2012
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
6 WIRE
AUDIO I/F
J
H
G
F
E
D
C
B
A
1 2 3 4 5 6 7 8 9
U2 - TAS1020B
U15- SRC4392
U16- SRC4392
GPIO
I2S#3
I2S#2
I2S#1
I2C & SPI
I2C
I2C
AUDIO CONTROL
I2C & SPI
CONTROL INTERFACE
USB CONTROLLER
ANALOG
OUTPUTS
ANALOG
INPUTS
I2S #4 (=I2S#1 routed thru GPIO)
AUDIO INTERFACE
OPTICAL
AUDIO INPUT
SRC #2
OPTICAL
AUDIO OUTPUT
OPTICAL
AUDIO INPUT
SRC #1
OPTICAL
AUDIO OUTPUT
I2S #3
AUDIO INTERFACE
I2S #2
AUDIO INTERFACE
I2S #1
AUDIO INTERFACE
BALL ASSIGNMENTS
WCSP (YZF) Package, Bottom View
TLV320AIC3262IYZF
U17 - TLV320AIC3262YZFEVM-U
BALL ASSIGNMENTS
WCSP (YZF) Package, Top View
TLV320AIC3262IYZF
AVDD3_33
MICDET
DIN1
BCLK1
MCLK1
IN2L
IN3R
VREF_AUDIO
IN4L
RECVSS
AVDD1_18
VREF_SAR
IN3L
WCLK1
IN2R
DOUT1
RECP
BCLK2
RECVDD_33
AVSS
IN1L/AUX1
DVDD
DIN2
IOVDD
RECM
AVDD_18
MICBIAS_EXT
IN1R/AUX2
MICBIAS
HPR
SCL
WCLK2
IOVSS
DVSS
AVSS1
HVDD_18 HPL
VNEG
AVDD2_18
AVSS3
IN4R
GPI3
WCLK3
SDA
GPI1
LOL
CPFCM
HPVSS_SENSE
CPVSS
AVSS2
DOUT2
DIN3
GPI2
GPO1
CPFCP
LOR
CPVDD_18
AVDD4_18
DVSS
SPI_SELECT
GPI4
DOUT3
BCLK3
SLVDD
AVSS4
SPKLM
SRVSS
SPK_V
GPIO2
IOVSS
GPIO1
RESET
SPKLP
SLVSS
SPKRM
SRVDD
SPKRP
MCLK2
VBAT
IOVDD
DVDD
DVDD
IOVDD
VBAT
MCLK2
SPKRP
SRVDD
SPKRM
SLVSS
SPKLP
RESET
GPIO1
IOVSS
GPIO2
SPK_V
SRVSS
SPKLM
AVSS4
SLVDD
BCLK3
DOUT3
GPI4
SPI_SELECT
DVSS
AVDD4_18
CPVDD_18
LOR
CPFCP
GPO1
GPI2
DIN3
DOUT2
AVSS2
CPVSS
HPVSS_SENSE
CPFCM
LOL
GPI1
SDA
WCLK3
GPI3
IN4R
AVSS3
AVDD2_18
VNEG
HPL HVDD_18
AVSS1
DVSS
IOVSS
WCLK2
SCL
HPR
MICBIAS
IN1R/AUX2
MICBIAS_EXT
AVDD_18
RECM
IOVDD
DIN2
DVDD
IN1L/AUX1
AVSS
RECVDD_33
BCLK2
RECP
DOUT1
IN2R
WCLK1
IN3L
VREF_SAR
AVDD1_18
RECVSS
IN4L
VREF_AUDIO
IN3R
IN2L
MCLK1
BCLK1
DIN1
MICDET
AVDD3_33
9 8 7 6 5 4 3 2 1
A
B
C
D
E
F
G
H
J
B
A
A
B
www.ti.com
TLV320AIC3262EVM-U Schematic
5 TLV320AIC3262EVM-U Schematic
The schematic diagram and the top-assembly drawing for the TLV320AIC3262EVM-U is provided as a reference.
Figure 15. Schematic, Sheet 1 of 8
15
SLAU386A–January 2012–Revised March 2012 TLV320AIC3262EVM-U Evaluation Module
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
U2
2220191817151413
31
30
29
27
26
25
2423
32
34
35
36
373839
40
21
8
4
28
16
33
42 41
12
11
10
9
7
6
5
434445
2
1
48
3
4647
1.5K
R2
0.001uF
C1
100K
R5
1uF
C7
D1
100pF
C2
GND
GND
SDOUT1
WCLK
BCLK
DIN
MCLK
GND
GND
GND
GND GND GND GND GND
GND
GND
GND
GND
GND
GND
Y1
1
2
3
4
SIT8002AI-13-33E-6.00000T
Vcc
OUT
OE
GND
GND
SW2
21
GND
0.1uF
C10
10K
R9
GND
649
R6
30.9K
R1
27.4
R3
27.4
R4
2.7K
R12
2.7K
R13
U3
1
2
3
4 5
6
7
8
24FC512-I/SM
+5V
SCLK
MISO
MOSI
SS~
RESET~
SW1
1 2
GND
0.1uF
C9
10K
R8
GND
SW3
1 2
GND
0.1uF
C11
10K
R10
GND
D2
649
R7
GND
GND
1
2
4
5
3
U5
SN74LVC1G126DBVR
I2S_ENABLE
10K
R11
GND
SPI_SELECT
0.1uF
C3
0.1uF
C6
0.1uF
C8
0.1uF
C12
0.1uF
C16
0.1uF
C15
0.1uF
C14
IOVD
IOVD
SCL_IOVD
SDA_IOVD
GND
GND
SN74LVC1G126DBVR
U7
3
5
4
2
1
0.1uF
C18
IOVD
GND
GND
1
2
4
5
3
U6
SN74LVC1G126DBVR
0.1uF
C17
IOVD
GND
200K
R14
PCA9306DCTR
U4
8
7
6
5 4
3
2
1
0.1uF
C13
2.7K
R53
2.7K
R52
+3.3VD
+3.3VD
+3.3VD
+3.3VD
+3.3VD
+3.3VD
+3.3VD
+3.3VD
+3.3VD
+3.3VD
+3.3VD
+3.3VD
+3.3VD
+3.3VD
SW4
2
1
4.7K
R82
2
1
EE-PROGRAM
GND
47pF
C4
47pF
C5
6
5
4
3
2
1
J1
SD-54819-026
Data-
5v
ID_NC
GND
Data+
Case
GND
3
1
2
JP4
SRC1_DOUT_B(ADC Data)
(ADC Data)
(DAC Data)
I2C EEPROM
TAS1020B - USB CONTROLER
I2C
PATCH#
ACTIVE/
APP#
SPI
RESET
I2SUSB INPUT
APP
TAS1020BPFB
RESET
PATCH
MCLK
I2S_ENABLE
SPI_SELECT
AIC3262YZFEVM-U
USB RESET
TO PROGRAM U3,
INSTALL
JUMPER J12
TLV320AIC3262EVM-U Schematic
www.ti.com
Figure 16. Schematic, Sheet 2 of 8
16
TLV320AIC3262EVM-U Evaluation Module SLAU386A–January 2012–Revised March 2012
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
V_ENABLE
VBAT_ext
C30
47uF
C32
47uF
C40
0.1uF
C41
0.1uF
C42
0.1uF
C43
0.1uF
C46
0.1uF
C44
0.1uF
C39
0.1uF
+5V
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
C47
10uF
+1.8V
+1.8V
+1.8V
+1.8V
+3.3V
GNDGND
IOVDD
+1.8V
GND GNDGNDGND
C23
0.1uF
GNDGNDGND
C20
0.1uF
GND
+5V
+5V
+5V
R15
10K
TPS73618DBVT
TPS73618DBVT
U8
5
43
2
1
V_ENABLE
V_ENABLE
GND GNDGNDGND
C26
0.1uF
+5V +3.3V
1
2
3 4
5
TPS73633DBVT
U10
V_ENABLE
C45
10uF
+1.8V
TPS73618DBVT
1
2
3 4
5
U9
TPS73618DBVT
C29
0.1uF
C28
10uF
+1.8V
+1.8V_CP
C21
47uF
C24
47uF
C27
47uF
C19
10uF
C22
10uF
C25
10uF
+1.8V_CP
C35
2.2uF
GND
GND
C34
10uF
IOVD
C37
1uF
C38
1uF
C31
0.1uF
C33
0.1uF
VARVD
GND
W5
2
1
W1
2
1
W2
2
1
W9
2
1
W8
2
1
W7
2
1
W10
2
1
1
2
3
W6
AGND1 DGND1AGND2 DGND2 DGND3
TLV320AIC3262YZF
U17
F3
E3
C2
E4
C5
E6
B4
A8
A3
A1
A2
E5
C7
F9
TLV320AIC3262YZF
U17
E8
D9
D8
B8
B9
A5
A6
B7
B6
A7
TLV320AIC3262YZF
U17
H3
F8
J9
E7
J3
F4
H9
J4
GND GNDGNDGND
C95
0.1uF
+5V
VR1
TPS73633DBVT
5
43
2
1
C98
47uF
C97
10uF
C96
0.1uF
C36
2.2uF
+3.3VD
W14
3
2
1
+5V
R17
221
C49
0.1uF
GND
TP57
+3.3VD
C48
10uF
JP2
1
2
3
JP3
3
2
1
1
2
J11
GND
R79
2
R18
2
R19
2
R20
2
R61
2
1
2
3
W3
+1.8V
R77
0
C109
10uF
C110
10uF
R78
0
3
2
1
W4
+1.8V_CP
3
2
1
W57
+1.8V_CP
SGND1 SGND2
+5V +1.8V_CP
+1.8V
+3.3V
+3.3VD
VARVD
EXTERNAL CLASS-D POWER SUPPLY
+5.0V USB INPUT
+3.3V Analog_3V3
SPEAKER VOLTAGE
USB +5V
AIC3262YZFEVM-U
POWER SUPPLIES
+5.0V USB INPUT
+1.8V OUTPUT
CHARGE PUMP (ONLY)
+5.0V USB INPUT
+1.8V OUTPUT
+5.0V USB INPUT
+3.3V IOVDD
AVDD_18
CURRENT
MEASUREMENT
AVDD1_18
CURRENT
MEASUREMENT
AVDD2_18
CURRENT
MEASUREMENT
AVDD4_18
CURRENT
MEASUREMENT
AVDD3_33
CURRENT
MEASUREMENT
CHARGE PUMP &
CLASS-D POWER
DIGITAL POWER
ANALOG POWER
NO CONNECT
DVDD
CURRENT
MEASUREMENT
IOVDD
CURRENT
MEASUREMENT
HVDD
CURRENT
MEASUREMENT
AGND=GND=DGND
GROUND
www.ti.com
TLV320AIC3262EVM-U Schematic
Figure 17. Schematic, Sheet 3 of 8
17
SLAU386A–January 2012–Revised March 2012 TLV320AIC3262EVM-U Evaluation Module
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
VBAT_ext
Headset_MIC
Headset_MIC
J4
5
6
3
1
4
2
Shield
RIGHT
LEFT
220
FB1
2
1
GND
J5
5
6
3
1
4
2
Shield
RIGHT
LEFT
LOL
LOR
GND
J2
5
6
3
1
4
2
Shield
RIGHT
LEFT
2.2K
R21
IN1R
IN1L
GND
GND
0
R25
C62C61C59
0
R26
0
R23
0
R24
C60
4
3
2
1
J3
GNDGND
GND
GND
GND
IN2L
IN3R
IN3L
IN2R
GNDGND
100
R27
100
R28
IN2R
IN1R
IN3L_TP
IN3R_TP
IN2L
MICBIAS
LOL
LOR
1uF
C63
1uF
C64
IN4R
IN4L
IN4L_TP
IN4R_TP
1uF
C50
TP4
IN1L
MICDET
47uF
C67
47uF
C68
0
R29
0
R30
W11
2
1
0.47uF
C108
0.47uF
C52
0.47uF
C53
0.47uF
C54
0.47uF
C55
0.47uF
C56
0.47uF
C57
0.47uF
C58
U17
TLV320AIC3262YZF
D5
C1
D2
D6
A4
B5
E9
C9
A9
C8
B2
B3
C6
D7
E1
E2
F2
F1
C3
B1
D4
D3
D1
C4
W12
2
1
PBC02SAAN
2.2K
R22
2.2K
R54
10K
R56
GND
GND
SPKLP
SPKLM
SPKRM
SPKRP
1K
R59
1K
R58
1K
R57
0.0047uF
C101
1K
R60
0.0047uF
C99
0.0047uF
C102
0.0047uF
C100
GND
GNDGND
GND
FLT_RP
FLT_RM
FLT_LM
FLT_LP
16
R63
GND
J19
5
6
3
1
4
2
Shield
RIGHT
LEFT
GND
16
R62
GND
2
1
W18
2
1
W47
GND
221
R68
0.1uF
C107
10uF
C106
1
2
3
W17
3
2
1
W16
1
2
3
4
J7
GND
10K
R55
221
R66
221
R67
0.1uF
C104
0.1uF
C105
GND
GND
100
R64
100
R65
TP56
TP55
VREF_SAR
RECP
RECM
1
2
J6
MICDET
MICBIAS_EXT
MICBIAS
W55
1
2
3
32.4
R80
GND
W56
3
2
1
32.4
R81
GND
VREF_AUDIO
HPL
HPR
HPVSS_SENSE
SPLP
SPLM
SPRM
SPRP
HPL
HPR
AVSS_SENSE
RECL
RECR
0.047uF
C66
0.047uF
C65
0.047uF
C51
0.047uF
C103
0
R83
0
R84
1
2
3
W60 W61
3
2
1
R85
DNP
TLV320AIC3262IYZF
REC OUT
LINE OUT
ANALOG I/O
SAR VOLTAGE
REFERENCE
AIC3262YZFEVM-U
MIC IN
ANALOG REFERENCE
FILTER
1-2 2-3
1-2
W61
HEADSET TYPE SELECTION
2-3W60
MIC_GND GND_MIC
TLV320AIC3262EVM-U Schematic
www.ti.com
Figure 18. Schematic, Sheet 4 of 8
18
TLV320AIC3262EVM-U Evaluation Module SLAU386A–January 2012–Revised March 2012
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
SCLK_GPI1
MOSI_SDA
SSZ_SCL
MISO_GPO1
SRC1_RXCKO
SRC2_RXCKO
WCLK3
BCLK3
RESET~
SCL_IOVD
SDA_IOVD
MOSI
SS~
SPI_SELECT
SCLK
MISO
RESET~
SCL_IOVD
SDA_IOVD
GND
GND
GND
GND
TP30TP28 TP29 TP31
GND
GND
GND
GND
TP34TP32 TP33 TP35
GND
GND
GND
GND
TP38TP36 TP37 TP39
GND
GND
GND
GND
GND
GND
WCLK2
BCLK2
BCLK3
WCLK3
GPIO2_BCLK
GPIO1_WCLK
W23
3
2
1
1
2
3
W25
1
2
3
W26
1
2
3
W27
1
2
3
W28
1
2
3
W24
W29
3
2
1
W30
3
2
1
W31
3
2
1
W32
3
2
1
W33
3
2
1
W34
3
2
1
W35
3
2
1
W36
3
2
1
W37
3
2
1
W38
3
2
1
W39
3
2
1
W40
3
2
1
TP21
TP20
TP19
TP18
TP17
TP15
TP16
BCLK1
WCLK1
TP24 TP25 TP26 TP27
TP22
TP23
1
2
3
W19
1
2
3
W20
1
2
W21
W22
2
1
10K
R31
10K
R32
U17
TLV320AIC3262YZF
H2
G1
J6
G4
G2
J1
J2
H1
G8
H5
H4
J5
G7
G3
G9
H6
J8
H8
F6
J7
G5
H7
G6
F5
F7
W48
1
2
3
W49
3
2
1
W51
3
2
1
W52
3
2
1
GND
IOVD
W53
1
2
3
W54
1
2
3
GND
IOVD
W50
1
2
3
DIN
SDOUT1
BCLK
WCLK
DOUT1
DIN1
SRC2_MCLK
DOUT2
DIN2
DOUT3
DIN3
GPO1_DOUT
GPI2_DIN
DOUT3
SRC1_MCLK
W58
1
2
W59
1
2
MCLK2
MCLK1
(ADC Data)
(DAC Data)
2-3
USB CONTROLER
TAS1020B
I2C / SPI
SELECTION
AIC3262YZFEVM-U
W19
W20
I2C SPI
1-2
2-3 1-2
OPEN 1-2W21
OPEN 1-2W22
I2S I2S_2
I2S_3
I2S_4
SRC_2
SIDE B
&
BREAKOUT
CONNECTOR
SRC_2
SIDE A
&
BREAKOUT
CONNECTOR
SRC_1
SIDE A
&
BREAKOUT
CONNECTOR
BREAKOUT
CONNECTOR
I2S_1
Install W25-W28 pins 2-3
and use ASI1, for operating
AIC3262 at USB Sampling
Rate
When USB is running at a
different sample rate than
AIC3262, then remove
W27 pin 2-3 or disable the
DOUT1 by writing to I2C
Book 0, Page 4, Register
67, D4-D1=0
FROM BREAKOUT BOARD
FROM BREAKOUT BOARD
www.ti.com
TLV320AIC3262EVM-U Schematic
Figure 19. Schematic, Sheet 5 of 8
19
SLAU386A–January 2012–Revised March 2012 TLV320AIC3262EVM-U Evaluation Module
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
U16 - 11
U16 - 15
U15 - 15
U15 - 11
R34
2.2K
C74
0.1uF
C73
0.1uF
SM7745HSV-22.5792M
4
3
2
1
Y2
22.5792M
Vcc
OUT
OE
GND
SM7745HSV-24.576M
3
2
1
Y3
24.576M
Vcc
OUT
4
OE
GND
C69
0.01uF
GND
C71
0.01uF
GND
GND
GND
GND
R33
10K
R35
10K
SN74LVC1G125DBVR
U13
5
43
2
1
SN74LVC1G125DBVR
1
2
3 4
5
U14
TP40
TP41
GND
GND
IOVD
IOVD
GND
GND
C70
0.1uF
GND
GND
ICS542
1
2
3
4 5
6
7
8
U12
C72
0.01uF
GND
R37
10K
GND
R38
10K
R36
10K
W41
2
1
W42
2
1
W43
2
1
W44
2
1
1
2
3 4
5
6
W45
MCLK
22.5792MHz/4
ADJCLK
1
2
3 4
5
6
W46
MCLK
22.5792MHz/4
ADJCLK
SN74LVC74APWR
U11
1
2
3
4
5
6
7 8
9
10
11
12
13
14
+3.3VD
+3.3VD+3.3VD
+3.3VD
+3.3VD
+3.3VD
+3.3VD
+3.3VD
+3.3VD
+3.3VD
SN74LVC1G07DBVR
1
2
3 4
5
U1
NC
GND Y
VCC
A
SN74LVC1G07DBVR
1
2
3 4
5
U18
NC
GND Y
VCC
A
SN74LVC1G07DBVR
1
2
3 4
5
U19
NC
GND Y
VCC
A
SN74LVC1G07DBVR
1
2
3 4
5
U20
NC
GND Y
VCC
A
IOVD
GND
R70
4.75K
R69
357
LOCK_SRC2
Green
+3.3VD
R72
4.75K
R71
357
READY_SRC1
Green
+3.3VD
R76
4.75K
R75
357
READY_SRC2
Green
+3.3VD
R74
4.75K
R73
357
LOCK_SRC1
Green
+3.3VD
GND
GND
GND
IOVD
IOVD
IOVD
SRC2_MCLK
SRC1_MCLK
MCLK
C112
0.1uF
C111
0.1uF
Install Jumper in W41 to
disable Y2 Output Clock
Install Jumper in W42 to
disable Y3 Output Clock
TO SRCs
SRC2_MCLK
SRC1_MCLK
(USB)
Input/12
Input/16
Input/4Input/2
Input/8
Input/6
Installed
Removed
Removed
Removed
Removed
Installed
Power Down ALLInstalled Installed
W43W44 CLK CLK/2
TLV320AIC3262EVM-U Schematic
www.ti.com
Figure 20. Schematic, Sheet 6 of 8
20
TLV320AIC3262EVM-U Evaluation Module SLAU386A–January 2012–Revised March 2012
Submit Documentation Feedback
Copyright © 2012, Texas Instruments Incorporated
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
Texas Instruments TLV320AIC3262EVM (Rev. A) User guide
- Type
- User guide
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Texas Instruments TPA2026D2 User guide
-
-
-
-
-
-
-
-
-
Other documents
-
miniDSP miniStreamer User manual
-
Renesas ISL26104AV28EV1Z Operating instructions
-
-
Analog Devices EVAL-ADAU1979 User manual
-
-
Cyrus CD t User manual
-
AMS AS3460 User guide
-
Snap Circuits SCDLG100 Owner's manual
-
Allo.com VOLT Technical Manual
-
WIA W17 Suppliment Owner's manual
