Contec BX-825 Owner's manual

BX-825
Contec
Brand
Contec
Model
BX-825
Category
Server barebones
Type
Owner's manual
IPC Series
BOX-PC 825D Series
Fanless, Atom E3845 1.91GHz
DVI-I, DisplayPort
User’s Manual
CONTEC CO., LTD.
BX-825D User’s manual
i
Check Your Package
Thank you for purchasing the CONTEC product.
The product consists of the items listed below.
Check, with the following list, that your package is complete. If you discover damaged or missing items,
contact your retailer.
Product Configuration List
BX-825D-DCxx0000
[Base Model]
BX-825D-DCxxxxxx *1
[OS Pre-install Model]
Name
Pcs.
Pcs.
The main body
1
1
CFast card removal prevention fitting
1
1
USB removal prevention fitting
1
1
USB / Displayport removal prevention
fitting
1
1
Cable Tie
2
2
DVI-analog RGB conversion adapter
1
1
Washer assembled screw (M3 x 6)
3
3
Washer assembled and cross recessed
hexagonal bolt (M4 x 10, black)
4 4
Power supply
connector complete set
Power connector
1
1
Contact
4
4
Product Guide
1
1
IPC Precaution List
1
1
Warranty Certificate
1
1
Serial Number Label
1
1
Royalty consent contract (For OS)
- *2
1
Setup Procedure Document
- *2
1
Recovery Media Set
- *2
1
*1 Except for base model.
*2 It is not packed to the base model.
* The User
’
s Guide of this product is offered as the PDF file in our web page. With it, since information such as a
setup of hardware, each component function and BIOS setup is indicated, please refer to it if needed.
ii
BX-825D User’s manual
Product Configuration Image
* See the Product Configuration List to check if all the components are included for the specified number of units.
Copyright
Copyright 2018 CONTEC CO., LTD. ALL RIGHTS RESERVED.
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
CONTEC CO., LTD. makes no commitment to update or keep current the information contained in this
document.
The information in this document is subject to change without notice.
All relevant issues have been considered in the preparation of this document. Should you notice an
omission or any questionable item in this document, please feel free to notify CONTEC CO., LTD.
Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may
appear in this document or for results obtained by the user as a result of using this product.
Trademarks
Intel, Intel Atom, Intel Core and Celeron are registered trademarks of Intel Corporation. MS, Microsoft
and Windows are trademarks of Microsoft Corporation. Other brand and product names are trademarks
of their respective holder.
BX-825D User’s manual
iii
Table of Contents
Check your package ..................................................................................................................................... i
Copyright ..................................................................................................................................................... ii
Trademarks .................................................................................................................................................. ii
Table of Contents ....................................................................................................................................... iii
1. INTRODUCTION 1
About the Product........................................................................................................................................ 1
Features ................................................................................................................................................. 2
Supported OS ....................................................................................................................................... 2
Customer Support ........................................................................................................................................ 3
Web Site................................................................................................................................................ 3
How to Obtain Service ................................................................................................................................ 3
Liability ........................................................................................................................................................ 3
Safety Precautions ....................................................................................................................................... 4
Safety Information ............................................................................................................................... 4
Caution on the BX-825 Series ............................................................................................................ 4
Mesures de sécurité ..................................................................................................................................... 6
Informations de sécurité ...................................................................................................................... 6
Attention dans le cas de la série BX-825 ........................................................................................... 6
Security Warning ......................................................................................................................................... 9
2. SYSTEM REFERENCE 11
Specifications............................................................................................................................................. 11
Power Management Features ................................................................................................................... 14
Power Requirements ................................................................................................................................. 14
Power Consumption........................................................................................................................... 14
Physical Dimensions ................................................................................................................................. 15
3. HARDWARE SETUP 17
Before Using the Product for the First Time .......................................................................................... 17
Hardware Setup ......................................................................................................................................... 18
Attaching the CFast Attachment Fittings......................................................................................... 18
Attaching the FG ................................................................................................................................ 19
Fastening the Cable............................................................................................................................ 20
Installation Requirements.................................................................................................................. 22
4. BIOS SETUP 25
Introduction ................................................................................................................................................ 25
iv
BX-825D User’s manual
Starting Setup ............................................................................................................................................ 25
Using Setup ................................................................................................................................................ 26
Getting Help ....................................................................................................................................... 26
In Case of Problems ........................................................................................................................... 26
A Final Note About Setup ................................................................................................................. 26
Main Menu ................................................................................................................................................. 27
Setup Items ......................................................................................................................................... 27
Main............................................................................................................................................................ 28
Advanced ................................................................................................................................................... 29
Trusted Computing ............................................................................................................................ 30
ACPI Settings ..................................................................................................................................... 32
Super IO Configuration ..................................................................................................................... 34
Serial Port A Configuration .............................................................................................................. 35
Digital I/O Configuration .................................................................................................................. 36
H/W Monitor ...................................................................................................................................... 37
CPU Configuration ............................................................................................................................ 38
Socket 0 CPU Information ................................................................................................................ 39
PPM Configuration ............................................................................................................................ 40
SATA Configuration ......................................................................................................................... 41
CSM Configuration ........................................................................................................................... 42
Chipset ................................................................................................................................................ 43
North Bridge ....................................................................................................................................... 44
Intel IGD Configuration .................................................................................................................... 45
LCD Control ....................................................................................................................................... 47
South Bridge Configuration .............................................................................................................. 48
Azalia HD Audio ............................................................................................................................... 49
LAN Configuration ............................................................................................................................ 51
Security ...................................................................................................................................................... 52
Secure Boot menu ..................................................................................................................................... 53
Key Management ...................................................................................................................................... 54
Boot Configuration ................................................................................................................................... 55
Save & Exit ................................................................................................................................................ 57
5. EACH COMPONENT FUNCTION 59
Component Name ...................................................................................................................................... 59
Front View .......................................................................................................................................... 59
Rear View ........................................................................................................................................... 59
Component Function ................................................................................................................................. 61
LED: POWER, ALARM................................................................................................................... 61
DC Power Input Connector: DC-IN ................................................................................................. 61
POWER SW ....................................................................................................................................... 62
DVI Interface: DVI-I ......................................................................................................................... 62
Display Port Interface: Display Port ................................................................................................ 63
BX-825D User’s manual
v
USB3.0 Port: USB3.0 ........................................................................................................................ 64
USB2.0 Port: USB2.0 ........................................................................................................................ 64
Giga bit-Ethernet: LAN A, B, C ....................................................................................................... 65
CFast Card Connector: CFast ........................................................................................................... 66
Serial Port Interface: COM Port ....................................................................................................... 67
EXT: EXT Connector ........................................................................................................................ 68
6. APPENDIX 69
POST Codes ............................................................................................................................................... 69
Battery ........................................................................................................................................................ 72
Life of mSATA SSD ................................................................................................................................. 73
7. LIST OF OPTIONAL PRODUCTS 75
vi
BX-825D User’s manual
1. Introduction
BX-825D User’s manual
1
1.
Introduction
About the Product
This product is a fanless computer for embedded applications. It features an Intel Atom processor E3845
chipset. Even though it has a slitless case, it supports a wide range of temperatures from 0 to 55°C and
can be operated stably under harsh operating conditions.
Thanks to its Quad-Core CPU, it can perform stable, high-speed processing of four applications at the
same time (one application is processed by each core). The Quad-Core CPU also greatly reduces power
consumption, with power efficiency improved to at least twice that of the previous generation's
architecture.
It has extension interfaces such as DVI-I, Display Port, 1000BASE-T, USB 3.0, and serial. It employs a
mSATA SSD and CFast card for storage and is fanless to ensure a totally spindleless design that
simplifies maintenance.
Embedded-type CPU have been adopted. The use of readily available parts ensures the ease of the use of
the product. In addition, the use of Contec-customized BIOS allows support to be provided at the BIOS
level.
This product is available in the following models:
- Intel Atom Processor E3845 1.91GHz, without OS
BX-825D-DC760000 (Memory 4GB, ECC, with mSATA SSD 32GB (MLC NAND), without OS)
- Intel Atom Processor E3845 1.91GHz with OS pre-installed
BX-825D-DC761824 (Memory 4GB ECC, with mSATA SSD 32GB (MLC NAND),
Windows 10 IoT Enterprise LTSB 2016 64bit (Japanese, English, Chinese,
Korean) + McAfee)
- Intel Atom Processor E3845 1.91GHz with OS pre-installed
BX-825D-DC791824 (Memory 4GB ECC, with mSATA SSD 64GB (MLC NAND),
Windows 10 IoT Enterprise LTSB 2016 64bit (Japanese, English, Chinese,
Korean) + McAfee)
1. Introduction
2
BX-825D User’s manual
Features
-
Secured IoT device for edge computing
The OS installed model contains the 64-bit version Windows 10 IoT Enterprise that supports in four
languages (Japanese, English, Chinese, and Korean) and McAfee white list type anti-virus software.
This product is pre-equipped as an Internet-connection device.
-
3 Gigabit LAN ports interconnect differing network hierarchy
This product has three Gigabit LAN ports. It is ideal for IoT gateway which interconnects differing
network hierarchy including fieldbus, between controllers, and higher information networks in the
facilities.
- Contributing to reduction of running cost and promotion of energy efficiency
It adopts the low-power platform with Intel
®
Atom
(TM)
Processor E3845 that realizes lower power
consumption while ensuring sufficient performance.
- Supports a wide range of temperatures with operations guaranteed from 0 to 55°C*1
Stable operations of this product are possible over a wide range of temperatures from 0 to 55°C.
*1 This specification applies when forced air cooling is used. Derating may be necessary depending on the usage environment.
- Slitless/fanless design that reduces maintenance work
This product's spindleless design eliminates the heat dissipating slit and CPU fan and adopts SSD for the
storage. There is no need to worry about the intrusion of dust or foreign objects, and the use of parts that
degrade over time is minimized to facilitate maintenance.
- Remote power management function to reduce operation tasks
Supports system startup by external device over network (Wake-on-LAN) and by modem reception
(power on by ring). It encourages significant labor saving in operation.
-
The global safety standard complied
This product complies with CE / CB / UL / CCC / BSMI / KC safety standard, and by applying this PC to
your export equipment, it greatly helps reduce the costs of development and transportation.
- Removal prevention fittings and cable ties are available to prevent problems caused by cable
disconnections.
This product is equipped with a CFast card removal prevention fitting. This prevents problems from
occurring by ensuring that the CFast card does not fall out.
- A wide range of power supplies (9.6 - 31.2VDC) supported
As the product supports a wide range of power (9.6 - 31.2VDC), it can be used in a variety of power
environments. The separately available AC adapter adds support for 100 - 240VAC power.
Supported OS
- Windows 10 IoT Enterprise LTSB 2016 (Japanese, English, Chinese, Korean), 64bit
1. Introduction
BX-825D User’s manual
3
Customer Support
CONTEC provides the following support services for you to use CONTEC products more efficiently and
comfortably.
Web Site
https: //www.contec.com/
Latest product information
CONTEC provides up-to-date information on products.
CONTEC also provides product manuals and various technical documents in the PDF.
Free download
You can download updated driver software and differential files as well as sample programs available in
several languages.
Note! For product information
Contact your retailer if you have any technical question about a CONTEC product or need its price,
delivery time, or estimate information.
How to Obtain Service
For replacement or repair, return the device freight prepaid, with a copy of the original invoice. Please
obtain a Return Merchandise Authorization number (RMA) from the CONTEC group office where you
purchased before returning any product.
* No product will be accepted by CONTEC group without the RMA number.
Liability
The obligation of the warrantor is solely to repair or replace the product. In no event will the warrantor be
liable for any incidental or consequential damages due to such defect or consequences that arise from
inexperienced usage, misuse, or malfunction of this device.
1. Introduction
4
BX-825D User’s manual
Safety Precautions
Understand the following definitions and precautions to use the product safely.
Safety Information
This document provides safety information using the following symbols to prevent accidents resulting in
injury or death and the destruction of equipment and resources. Understand the meanings of these labels
to operate the equipment safely.
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury or in property damage.
Caution on the BX-825 Series
Handling Precautions
- Always check that the power supply is turned off before connecting or disconnecting power cables.
- Do not modify the product.
- Always turn off the power before inserting or removing circuit boards or cables.
- This product is not intended for use in aerospace, space, nuclear power, medical equipment, or other
applications that require a very high level of reliability. Do not use the product in such applications.
- If using this product in applications where safety is critical such as in railways, automotive, or
disaster prevention or security systems, please contact your retailer.
- The exchange of inappropriate battery is at risk of the explosion.
- Please process the used battery according to a manual.
- For battery replacement, contact your retailer as it must be performed as a process of repair.
- When disposing of a used battery, follow the disposal procedures stipulated under the relevant laws
and municipal ordinances. For details on replacing the battery, refer to the appendix.
DANGER
WARNING
CAUTION
WARNING
1. Introduction
BX-825D User’s manual
5
- Do not use or store this product in a location exposed to high or low temperature that exceeds range
of specification or susceptible to rapid temperature changes.
Example: - Exposure to direct sun
- In the vicinity of a heat source
- Do not use this product in extremely humid or dusty locations. It is extremely dangerous to use this
product with its interior penetrated by water or any other fluid or conductive dust. If this product
must be used in such an environment, install it on a dust-proof control panel, for example.
- Avoid using or storing this product in locations subject to shock or vibration that exceeds range of
specification.
- Do not use this product in the vicinity of devices that generate strong magnetic force or noise. Such
products will cause this product to malfunction.
- Do not use or store this product in the presence of chemicals.
- To clean this product, wipe it gently with a soft cloth dampened with either water or mild detergent.
Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent pealing or
discoloration of the paint.
- This product’s case may become hot. To avoid being burned, do not touch that section while this
product is in operation or immediately after turning off the power. Avoid installation in a location
where people may come into contact with that section.
- CONTEC does not provide any guarantee for the integrity of data on CFast.
- Always remove the power cable from the power outlet before mounting or removing an expansion
board and before connecting or disconnecting a connector.
- Always remove the power cable from the power outlet before connecting or disconnecting a
connector.
- As for the product with a D-SUB connector, the appropriate tightening torque for the cable connector
is less than 2 kgf·cm.
- To prevent corruption of files, always shutdown the OS before turning off this product.
- CONTEC reserves the right to refuse to service a product modified by the user.
- In the event of failure or abnormality (foul smells or excessive heat generation), unplug the power
cord immediately and contact your retailer.
- To connect with peripherals, use a grounded, shielded cable.
- The CFast card connector doesn't support hot plug. The pulling out opening of the CFast card cannot
be done in the state of power supply ON. Please neither pulling out opening of CFast in the state of
power supply ON of this product nor come in contact with CFast. This product may malfunction or
cause a failure.
- If you use any other CFast than our CFast, we can not guarantee this product’s specification. When
you newly select CFast for this product, you should read “Chapter 7” at first. If you select
unpreferable CFast, the system may work out of order.
- Component Life:
(1) Battery---The internal calendar clock and CMOS RAM are backed by a Lithium primary battery.
The backup time at a temperature of 25°C with the power disconnected is 10 years or
more.
(2) mSATA SSD--- This product contains mSATA SSD for OS storage area. Estimated life
endurance is 3,000 rewriting times per block.
* Replacement of expendables is handled as a repair (there will be a charge).
* The service life for consumable parts are reference values and are not guaranteed values.
* This product's specifications allow the device to be rebooted from the BIOS screen during startup.
This has no effect on operation after the OS boots.
CAUTION
1. Introduction
6
BX-825D User’s manual
Mesures de sécurité
Veillez à comprendre les définitions et mesures de précautions suivantes afin d’utiliser le produit en toute
sécurité.
Informations de sécurité
Ce document contient des informations relatives à la sécurité, sous utilisation des symboles suivant, afin
d’éviter tout accident risquant d’entraîner des blessures ou la mort et la destruction de l’équipement et des
ressources. Veillez à comprendre les significations de ces mots signalétiques pour utiliser l’équipement en
toute sécurité.
DANGER indique une situation dangereuse imminente qui, si elle n’est pas évitée,
entraînera des blessures graves, voire la mort.
AVERTISSEMENT indique une situation potentiellement dangereuse qui, si elle
n’est pas évitée, risque d’entraîner des blessures graves, voire la mort.
ATTENTION indique une situation potentiellement dangereuse qui, si elle n’est pas
évitée, risque d’entraîner des blessures de gravité mineure à moyenne ou des
dommages matériels.
Attention dans le cas de la série BX-825
Mesures de précaution pour la manipulation
- Toujours contrôler que l’alimentation électrique est coupée avant de brancher ou de débrancher les
câbles électriques.
- Ne pas modifier le produit.
- Toujours couper l’alimentation électrique avant d’ajouter ou de retirer des circuits imprimés ou des
câbles.
- Ce produit n’est pas destiné à une utilisation dans l’aérospatial, le spatial, l’énergie nucléaire, la
technique médicale, ou d’autres applications requérant un très haut niveau de fiabilité. Ne pas utiliser
le produit dans de telles applications.
- Dans le cas d’une utilisation de ce produit dans les applications où la sécurité est critique, telles que
dans le ferroviaire, l’automobile, la prévention des catastrophes ou les systèmes de sécurité, veuillez
contacter votre revendeur.
- L’échange de la batterie contre une batterie inadaptée représente un risque d’explosion.
- Veuillez manipuler la batterie usagée comme indiqué dans le manuel.
- Pour le remplacement de la batterie, veuillez contacter votre revendeur, comme cela doit être réalisé
en tant que processus de réparation.
- Dans le cas de la mise au rebut d’une batterie usagée, suivre les procédures de mise au rebut stipulée
par les lois et les réglementations municipales applicables. Reportez-vous à l’annexe concernant les
détails relatifs à l’échange de la batterie.
1. Introduction
BX-825D User’s manual
7
-
Ne pas utiliser ni entreposer ce produit dans un emplacement exposé à de hautes ou basses
températures dépassant la plage des spécifications ou soumis à de rapides variations de température.
Exemple : - Exposition à un ensoleillement direct
- - À proximité d’une source de chaleur
- Ne pas utiliser ce produit dans des emplacements extrêmement humides ou poussiéreux. Il est
extrêmement dangereux d’utiliser ce produit lorsque de l’eau, un autre fluide ou de la poussière
conductrice a pénétré à l’intérieur. Si ce produit doit être utilisé dans un tel environnement, l’installer
par exemple dans un panneau de commande étanche à la poussière.
- Éviter d’utiliser ou d’entreposer ce produit dans des emplacements soumis à des chocs ou des
vibrations dépassant la plage des spécifications.
- Ne pas utiliser ce produit à proximité d’appareils générant de forts forces ou bruits magnétiques. De
tels appareils entraîneront des dysfonctionnements de ce produit.
- Ne pas utiliser ou entreposer ce produit en présence de produits chimiques.
- Pour nettoyer ce produit, essuyez légèrement avec un chiffon doux humidifié soit avec de l’eau, soit
avec un détergent doux. Ne pas utiliser de produits chimiques ni de solvants volatiles, comme du
benzène ou un diluant, pour éviter un décollement ou une décoloration de la peinture.
- Le boîtier du produit peut chauffer. Pour éviter de se brûler, ne pas toucher cette partie tant que
produit est en service ou immédiatement après avoir coupé l’alimentation. Éviter de l’installer dans
un emplacement où des personnes risqueraient d’entrer en contact avec cette partie.
- CONTEC ne donne aucune garantie concernant l’intégrité des données contenue sur la CFast.
- Toujours débrancher le câble électrique de la prise électrique avant de monter ou de retirer une carte
d’extension et avant de brancher ou de débrancher un connecteur.
- Toujours débrancher le câble électrique de la prise électrique avant de brancher ou de débrancher un
connecteur.
- Afin de prévenir une altération des fichiers, toujours arrêter le système d’exploitation avant d’arrêter
ce produit.
- CONTEC se réserve le droit de refuser l’entretien de produits modifiés par l’utilisateur.
- En présence de défauts ou d’anormalité (odeurs nauséabondes ou génération excessive de chaleur),
débrancher immédiatement le câble électrique et contacter votre revendeur.
- Pour relier des périphériques, utiliser un câble mis à la terre et blindé.
- Le connecteur de carte CFast ne prend pas en charge l’insertion à chaud. L’éjection ou l’insertion de
la carte CFast ne peut pas s’effectuer lorsque que l’alimentation électrique est active. Ne jamais
éjecter, ni insérer, ni entrer en contact avec la CFast lorsque ce produit est sous tension électrique.
Ceci peut entraîner un dysfonctionnement ou un défaut de ce produit.
- Ne jamais utiliser une autre CFast que celle que nous fournissons, comme nous ne pourrons sinon
plus garantir les caractéristiques de ce produit. Avant de sélectionner une nouvelle CFast pour ce
produit, lisez le « Chapitre 7 ». La sélection d’une CFast inadaptée peut entraîner une panne dans le
système.
- Alimentation du composant :
(1) Batterie --- l’alimentation de l’horloge-calendrier interne et de la CMOS RAM est assurée par
batterie primaire au lithium.
Le temps de soutien par une température de 25°et C par alimentation coupée est supérieur à 10 ans.
1. Introduction
8
BX-825D User’s manual
(2) mSATA SSD ---Ce produit contient mSATA SSD pour la zone de stockage du système d'exploitation.
La durée de vie estimée est de 3 000 temps de réécriture par bloc.
* Le remplacement d’extensions fait l’objet d’une procédure de réparation (soumise à frais).
* La durée de vie utile de pièces consommables est donnée à titre de référence sans aucune garantie.
* Les caractéristiques de ce produit permettent de réamorcer l’appareil à partir de l’écran BIOS
pendant le démarrage.
Ceci reste sans influence sur le fonctionnement après l’amorçage du système d’exploitation
FCC PART15 Class A Notice
KC Class A Notice
EN55032 Class A Notice
Warning:
Operation of this equipment in a residential environment could cause radio interference.
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
NOTE
FCC WARNING
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
이 기기는 업무용 환경에서 사용할 목적으로
적합성평가를 받은 기기로서 가정용 환경에서
사용하는 경우 전파간섭의 우려가 있습니다.
1. Introduction
BX-825D User’s manual
9
Security Warning
When connecting to the network, be aware of security-related problems. See the examples of Security
measures below and set up the product properly along with the network devices.
[Information security risks]
- Unauthorized access from the outside through a network could cause the system halt, data damage, or
exposure to malware
*1
.
- Invaded and used as a stepping stone, a device might attack the others through networks.
(a victim becomes an assailant)
- Information might leak without realizing due to the connection to the network.
- Secondary damages such as harmful rumors, liability in damages, social credibility fall, and opportunity
loss are expected led by the troubles described above.
*1… Malware (Malicious Software) is software that brings harm to a computer system and performs unintended operations.
[Security measures - e.g.]
- Do not keep using the default password. (Refer to the product manual for the password setting).
- Set a strong password.
⇒Combined with upper and lowercase letters, and numbers so that it cannot be easily analogized
by others.
- Change the password periodically.
- Disable unnecessary network services and functions.
- Restrict access to the network with network devices.
*2
- Restrict ports to be released on the network with network devices.
- Create a closed network connection using such as dedicated network or VPN
*3
.
*2…Inquire for setting procedure to manufacturers.
*3…VPN (Virtual Private Network): a secured network that wards off unauthorized access by protecting the communication path with
authentication and encryption.
Unfortunately, there are no perfect ways to avert unauthorized access or close a security hole that are
endlessly found day and night. Please understand that risks are always involved with the Internet
connection, and we strongly recommend a user should constantly update information security measures.
1. Introduction
10
BX-825D User’s manual
2. System Reference
BX-825D User’s manual
11
2.
System Reference
Specifications
Table 2.1. Functional Specifications < 1 / 2 >
Model
BX-825D-DCxxxxxx
CPU Intel® Atom™ Processor E3845 1.91GHz
BIOS
BIOS (mfd. by AMI)
Memory
4GB, 204pin SO-DIMM socket x 1, PC3-10600(DDR3L 1333) ECC
Graphic
Intel® HD Graphics (built-in CPU)
System
resolution
Analog RGB
640x480, 800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x768,
1,280x800, 1,280x960, 1,280x1,024, 1,360x768, 1,366x768, 1,400x1,050, 1,440x900,
1,600x900, 1,680x1,050, 1,920x1,080, 1,920x1,200 (16,770,000 colors)
DVI-D
640x480, 800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x768,
1,280x800, 1,280x960, 1,280x1,024, 1,360x768, 1,366x768, 1,400x1,050, 1,440x900,
1,600x900, 1,680x1,050, 1,920x1,080 (16,770,000 colors)
DisplayPort
640x480, 800x600, 1,024x768, 1,152x864, 1,280x600, 1,280x720, 1,280x768,
1,280x800, 1,280x960, 1,280x1,024, 1,360x768, 1,366x768, 1,400x1,050, 1,440x900,
1,600x900, 1,680x1,050, 1,920x1,080, 1,920x1,200 (16,770,000 colors)
Internal storage mSATA SSD × 1
BX-825D-DC76xxxx : 32GB (MLC NAND) built in *1
BX-825D-DC79xxxx : 64GB (MLC NAND) built in *1
CFast card slot 1 slot, CFast CARD Type I x 1 bootable
LAN *2
Intel I210IT Controller
1000BASE-T/100BASE-TX/10BASE-T 3 port (Wake On LAN support)
USB
USB 3.0 compliant 2 port
USB 2.0 compliant 3 port
Serial I/F
RS-232C/422/485 : 1port (SERIAL PORTA), 9pin D-SUB connector (male)
Baud rate : 50 - 115,200bps, switched from the BIOS
General-purpose I/O
General-purpose TTL type (non-isolated), Input 7 channels, Output 8 channels,
Remote power on SW contact input
Hardware monitoring
Monitoring CPU temperature, power voltage
RTC/CMOS
Lithium backup battery life: 10 years or more.
The real-time clock is accurate within ±3 minutes (at 25°C) per month
Power Management
Power management setup via BIOS, Power On by Ring / Wake On LAN,
Supports PC98/PC99 ACPI Power management
Secutity (TPM)
TCG TPM2.0
2. System Reference
12
BX-825D User’s manual
Table 2.1. Functional Specifications < 2 / 2 >
Model
BX-825D-DCxxxxxx
Interface
Display
DVI-I x 1 (29pin DVI-I connector), Display Port x1
mSATA
BX-825D-DC76xxxx : 32GB (MLC NAND) built in *1
BX-825D-DC79xxxx : 64GB (MLC NAND) built in *1
CFast card slot
1 slot
LAN *2 3 port (RJ-45 connector)
USB
USB3.0 compliant 2port (TYPE-A connector x2)
USB2.0 compliant 3port (TYPE-A connector x3)
RS-232C/422/485
1 port (9pin D-SUB connector [male]), switched from the BIOS
General-purpose I/O
General-purpose TTL type (non-isolated), 7 input channels, 8 output channels (connector
specifications: 25-pin D-SUB connector [male]), 1 remote power SW contact input
Power supply
Rated input voltage
12 - 24VDC *3
Range of input voltage
9.6 - 31.2VDC (no power supply protection function)
Power consumption
12V 3.0A, 24V 1.6A
External device power
supply capacity
CFast card slot: 3.3V: 0.5A(500mAx1)
USB3.0 I/F: +5V: 1.8A (900mAx1)
USB2.0 I/F: +5V: 1.5A (500mAx2)
Physical dimensions
(mm)
220 (W) x 118.9 (D) x 49.8 (H) (No protrusions)
Weight
About 1.2kg (Excluding attachment fittings)
*1: The capacity of CFast is a value when 1GB is calculated by 1 billion bytes. The capacity that can be recognized from
OS might be displayed fewer than an actual value.
*2: If you use the 1000BASE-T, be careful of the operating temperature.
For more details on this, refer to chapter3, Installation Requirements.
*3: Use a power cable shorter than 3m.
2. System Reference
BX-825D User’s manual
13
Table 2.2. Installation Environment Requirements
Model
BX-825D-DC76xxxx
Ambient
specifications
Operating temperature
0 - 65°C (With 1000BASE-T: 0 - 60°C), airflow 0.7m/s
0 - 55°C (With 1000BASE-T: 0 - 50°C), no airflow
Storage temperature
-10 - +70°C
Humidity
10 - 90%RH (No condensation)
Floating dust particles
Not to be excessive (JEITA IT-1004A ClassA)
Corrosive gases An environment with a low amount of corrosive gas (JEITA IT-1004A ClassB)
Line-noise
resistance
Line noise
AC line / ±2kV *4,
Signal line / ±1kV (IEC61000-4-4 Level 3, EN61000-4-4 Level 3)
Static
electricity
resistance
Contact discharge / ±4kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 2)
Atmospheric discharge / ±8kV (IEC61000-4-2 Level 3, EN61000-4-2 Level 3)
Vibration
resistance
Sweep
resistance
10 - 57Hz/semi-amplitude 0.375 mm 57 - 500Hz/5.0G
60 min. each in x, y, and z directions
(JIS C60068-2-6-compliant, IEC60068-2-6-compliant)
Impact resistance
100G, half-sine shock for 6 ms in x, y, and z directions
(JIS C60068-2-27-compliant, IEC60068-2-27-compliant)
Grounding
Class D grounding, SG-FG / continuity
Standard *5
VCCI Class A, FCC Class A,
CE Marking (EMC Directive Class A, RoHS Directive),
CCC, UL
(
component certification
),
KC, BSMI, CB
*4: When AC adapter “PWA-65AWD1” is used.
*5: The BX-825D-DC79xxxx model does not support KC or BSMI.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56
  • Page 57 57
  • Page 58 58
  • Page 59 59
  • Page 60 60
  • Page 61 61
  • Page 62 62
  • Page 63 63
  • Page 64 64
  • Page 65 65
  • Page 66 66
  • Page 67 67
  • Page 68 68
  • Page 69 69
  • Page 70 70
  • Page 71 71
  • Page 72 72
  • Page 73 73
  • Page 74 74
  • Page 75 75
  • Page 76 76
  • Page 77 77
  • Page 78 78
  • Page 79 79
  • Page 80 80
  • Page 81 81
  • Page 82 82
  • Page 83 83

Contec BX-825 Owner's manual

BX-825
Contec
Brand
Contec
Model
BX-825
Category
Server barebones
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents