2. Hubbell Wiring Device-Kellems
  3. PD2827

Hubbell Wiring Device-Kellems PD2827 Installation guide

  • I have reviewed the installation instructions for the Hubbell HBL20SPF inline connector. The document details how to connect the connector, the required cable types and stripping lengths as well as the torque settings. I am ready to answer your questions about the product.
  • What types of cables can be used with this connector?
    How much of the outer jacket should be removed?
    What is the recommended torque for the terminal screws?
    What is the purpose of the wire shoe?
    What is the function of strain relief inserts?
Catalog Number: Female Inline HBL20SPF Hubbell
20A/125V - 15A/250V
Use with 16/3 type SJO, 0.34” nom. through 12/3 type
SO, 0.62” nom. Remove outer jacket 1-5/8” strip
conductors 3/8” (DO NOT TIN).
Place wire shoe over all loose wire strands of each
conductor.
Insert wires into barrel of terminal (green wire in middle
terminal) torque screws to 12 in-lbs.
Install strain relief inserts if required.
Attach cover and secure with (3) mounting screws – 12
in-lbs torque.
Cord holding system has six (6) different combinations
offering openings from 0.50” to 0.60”. Typical uses are
depicted below.
12/3 SO
No Inserts
12/3 SJOW
Two Inserts
Max. Clearance
14/3 SF2 with glass
Sleeve, two inserts
Max. clearance
Wiring Device-Kellems
Hubbell Incorporated (Delaware)
1-800-288-6000
Shelton, CT 06484
www.hubbell-wiring.com
PD2827 09/17
/