Zhongshan K-mate General Electronics BTH069 User manual

Category
Mobile headsets
Type
User manual

This manual is also suitable for

Zhongshan K-mate General Electronics BTH069 is a Bluetooth stereo headset that allows you to make calls and listen to music wirelessly. It features a comfortable retractable headband, volume controls, and a multi-function button for easy operation. The headset also has a built-in microphone for hands-free calling. With its long battery life and easy pairing process, the BTH069 is a great choice for anyone looking for a convenient and affordable wireless headset.

Zhongshan K-mate General Electronics BTH069 is a Bluetooth stereo headset that allows you to make calls and listen to music wirelessly. It features a comfortable retractable headband, volume controls, and a multi-function button for easy operation. The headset also has a built-in microphone for hands-free calling. With its long battery life and easy pairing process, the BTH069 is a great choice for anyone looking for a convenient and affordable wireless headset.

BTH069
Bluetooth stereo headset
User’s manual
Contents
Brief introduction…………...…………………………..…....1
Before use……………………………………………………..1
1. Overview………………………………………………...……1
2. Charging for headset.………………….………………….……2
Using the headset…..…………………………………………2
1. Turning on/off the headset..……...……....…………………......2
2. Wearing the headset…………………………………………….3
3. Pairing/connecting ………………….….…………………..….3
1) How to enter Pairing mode………..………..………………..3
2) Pairing headset with Bluetooth cell phone……….……….....4
3) Pairing headset with Bluetooth transmitter………………….4
4. Making calls with the headset……….………………………5
5. Playing music……………………….……………………….…6
6. LED indicator………………………………………......……....7
7. Factory Reset………………………………………………..….7
Care and maintenance……………………………..………..8
FAQs……………………………………...…………………..8
Specification……………………………...………………..…9
Welcome to use this Bluetooth headset, BTH069. Please read this users
manual carefully before use.
Brief introduction
BTH069 is a Bluetooth stereo headset. It is concise, vogue, and easy to
operate. You can use it to make a call and listen music wirelessly.
Before use
1. Overview
1 Retractable hea
d
b
an
d
5LED indicato
r
2 Volume up button 6Micro USB charging jack
3 Volume down button 7Micro
p
hone
4 Multi-functions
Button(MFB)
1
2.Charging for headset
BTH069 comes with a built-in rechargeable battery, prior to using it, it is
recommended to charge the battery fully for the first time. When the red
LED of headset flashes twice and emits “dong dong” tones every 20 seconds.
It means battery low. Please recharge the battery fully.
1. Plug the USB charging cable to the port of PC
2. Plug the USB charging cable into the charging jack of the headset
Red light on: Charging
Red light off: Finish charging
3. It will takes about 2.5 hours to finish charging
Warning:
1) The battery is recyclable.
2) Batteries (battery pack or batteries installed) shall not be
exposed to excessive heat place such as sunshine, fire or the
like.
Using the headset
1. Turning on/off the headset
Functions Operation LED indictor Prompt
tone
Turning on Press and hold MFB
b
utton for 4 seconds Blue LED on
for 1 second “Power on”
Turning
off Press and hold MFB
b
utton for 4 seconds Red LED on
for 1 secon
d
“Power
off”
Remark: In order to save power, the headset will turn off automatically if
no devices can be connected after 5 minutes.
2
2. Wearing the headset
The headset is designed as retractable style. Please adjust it according to the
actual use. The logo “L” corresponds to the left ear, and the logo “R”
corresponds to the right ear. Please wear the headset according to the
indicator.
3. Pairing/connecting
1) How to enter pairing mode
Functions Operation LED indicator Prompt
tone
Enter pairing
mode Ensure the headset is
offpress and hold
MFB button for 8
seconds
Red and blue LED
flashes alternately “DIDI”
Remarks: Paring mode will last 2 minutes, if no devices can be connected
over 2 minutes, the headset goes to standby mode automatically.
3
2)Pairing headset with Bluetooth cell phone
Prior to using the headset for the first time, you have to pair it with a
Bluetooth-enabled cell phone.
The general pairing steps are as follows:
(1)Keep the headset and your Bluetooth cell phone within 1 meter when
pairing, the closer the better.
(2)Make the headset enter into paring mode.( Please refer to “How to enter
pairing mode”.)
(3)Activate your cell phone’s Bluetooth function and search for Bluetooth
devices within range, select “BTH069” from the list of devices shown. After
successful connecting, blue LED of headset flashes twice every 5 seconds
Remarks:
After successful pairing, the paired devices will remember each other,
they will no need to pair next time. The headset will connect with last
connected device automatically when you turn it on again.
When the headset not connected with device, short press MFB button
once, the headset will try to connect with last connected device.
After enter pairing mode , the headset would not connect automatically.
If you need to pair it with other devices, please pair the headset with new
device according to the steps mentioned above.
3Pairing headset with Bluetooth transmitter
You can connect the headset with a Bluetooth transmitter to enjoy music
wirelessly. Hereby take BTT005 for example (not included in accessory).
The pairing steps are as follows:
(1)Keep the headset and Bluetooth
transmitter within 1 meter when pairing, the
closer the better.
(2)Make the headset enter pairing mode.
(Please refer to “How to enter pairing
mode.)
(3)Turn on the Bluetooth transmitter and make it enter pairing mode. It will
search for Bluetooth devices automatically and send a pairing request; After
successful pairing and connecting, blue LED of the headset flashes twice
every 5 seconds.
4
Remarks:
The pairing password of the headset is “0000”. So, the headset can only
pair with a Bluetooth transmitter whose pairing password is “0000”. The
headset does not support the Bluetooth transmitter whose pairing
password is not “0000”.
After successful pairing, the paired devices will remember each other,
they will no need to pair next time. The headset will connect with last
connected device automatically when you turn it on again.
If you fail to pair for many times, please read the users manual of
Bluetooth transmitter carefully.
4. Making calls with the headset
1) Basic operation:
Functions Status of headset O
p
eration
Cancel a call Callin
g
Short
ress MFB once
Answer a call Incomin
g
rin
g
in
g
Short
ress MFB once
Reject a call
Incoming ringing Long press MFB for 2
seconds and release it
until listen a tone.
End a call Durin
g
a call Short
ress MFB once
Volume up During a call Short press volume
u
p
butto
n
Volume down During a call Short press volume
down button
Transfer
conversation to
mobile
p
hone.
During a call Long press MFB for 2
seconds
Transfer
conversation to
headset.
During a call Long press MFB for 2
seconds
Micro
p
hone mute Durin
g
a call Double click MFB
Cancel mute During a call
(
micro
p
hone mute
)
Double click MFB
Voice dial Standby mode
(connected device) Long press MFB for 2
seconds and release it
until listen a tone.
Redial the last
numbe
r
Standby mode
(
connected device
)
Double click MFB
5
2)Three-ways call operation
Functions Status of headset O
p
eration
Answer new call and
end current call During a call, there are
second incomin
g
call Short press MFB once
Answer new call and
retain current call Incoming ringing Double click MFB
Switch calls Keep conversation and
another call retains Double click MFB
End current call and
switch retain call Keep conversation and
another call retains Short press MFB once
Remarks:
When the volume is adjusted to max or min, you will hear one prompt
tone.
You will hear “Weng” tone once every 3 seconds when the microphone
mutes.
When pressing the answer button on some mobile phones, the call will be
transferred to the mobile phone. You can switch the call to the headset by
using the conversation switch button or through operating on the mobile
phone. Please refer to your mobile phone user manual for further
information.
5. Playing music
Functions Status of the
headset Operation
Volume up Playing music Short press Volume up
b
utton
Vol um e
down Playing music Short press Volume down button
Last song Playing music Long press Volume up button
Next son
g
Pla
y
in
g
music Lon
g
p
ress Volume down button
Pause Playing music Short press MFB once
Pla
y
Pausin
g
Short
p
ress MFB once
6
Remarks:
When the volume is adjusted to max or min, you will hear one prompt
tone.
If you want to remote control last/next song, pause/play, it needs your
Bluetooth mobile phone or Bluetooth transmitter paired with the headset
to support AVRCP profile.
Excessive pressure from earphones and headphones can cause hearing
loss.
6. LED indicator
LED indicator Status of headset
Red and blue LED flashes alternatel
y
Pairin
g
mode
Blue LED flashes once ever
y
2 seconds Not connected to device
Blue LED flashes twice ever
y
5 seconds Connected to device
Red LED flashes twice every 20 seconds Low battery
7. Factory Reset
In the status of turning off, long press MFB button and volume up button (or
volume down button) about 10 seconds and release it until the LED not
flashes.
Remarks:
After factory reset, the paired list of headset will be deleted. After turn it on
again, the headset will enter pairing mode automatically, and you need to
re-pair and connect with Bluetooth devices.
7
Care and maintenance
Read the following recommendations carefully before using BTH069.
Following these you will be able to enjoy this product for many years.
Keep it dry and don’t put it in the dump place to avoid the product’s
internal circuit being affected.
Keep the product away from direct sunlight or hot places. High
temperatures will shorten the life of electronic devices, destroy the
battery or distort certain plastic part.
Don’t expose the product to cold areas. It may damage the internal circuit
board.
Don’t try to disassemble the product as it may get damaged if you are not
professional.
Don’t let it fall down onto the floor or other hard surfaces. The internal
circuit might get damaged.
Don’t use intensive chemical products or detergent to clean the product.
Don’t scratch the surface with sharp things. It may get damaged by
sweat.
In case the product doesn’t function properly, send it to the store you bought
it. The staff will help you to solve the problem
FAQs
1.What does it mean when red LED flashes twice every 20 seconds?
Battery is low power, need to be recharged.
2.Why is the red LED off when charging?
a) Please make sure the charging device connect with headset well;
b) The battery may dry up. Please charge the battery for 30 minutes, and
then the red LED will be ON.
3. How far is the effective rang between the headset and mobile phone?
According to the Bluetooth standard, the max available range of Class II
headset is 10 meters. It varies under different environment.
4. Why can’t I hear the sound on the headset?
a) Make sure the headset has been switched on;
b) Make sure the volume is not too low or muted;
c) Make sure the headset connects with the mobile phone correctly;
d) Make sure the distance between the headset and the cell phone is in the
available Bluetooth range. 8
5. Why can’t I hear the sound clearly on the headset?
a) Make sure the mobile phone is in the strong signal area;
b) Make sure the headset is in the available range of this product.
6. Why the pause/play, last/next song not function when playing music?
Make sure your Bluetooth device supports AVRCP (Audio/Video Remote
Control profile)
Specifications
Bluetooth version Bluetooth V3.0
Bluetooth profiles HF
P
,HSP,A2DP, AVRCP
O
p
eratin
g
distance 10 meters
Music time Up to 11hours
Talk time U
p
to 12 hours
Standby time Approx 250 hours
Char
g
in
g
In
p
ut DC 5V 500mA
Char
g
in
g
time A
pp
rox 2.5 hours
FCC Warning:
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
9
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

Zhongshan K-mate General Electronics BTH069 User manual

Category
Mobile headsets
Type
User manual
This manual is also suitable for

Zhongshan K-mate General Electronics BTH069 is a Bluetooth stereo headset that allows you to make calls and listen to music wirelessly. It features a comfortable retractable headband, volume controls, and a multi-function button for easy operation. The headset also has a built-in microphone for hands-free calling. With its long battery life and easy pairing process, the BTH069 is a great choice for anyone looking for a convenient and affordable wireless headset.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI