Baxton Studio MG0045-Grey-Twin Bunk Bed Assembly Instructions

Brand
Baxton Studio
Model
MG0045-Grey-Twin Bunk Bed
Category
Baby furniture
Type
Assembly Instructions

This manual is also suitable for

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
SAFETY WARNING
!
Follow the information on the warnings appearing on the upper bunk end structure and on
the carton. Do not remove warning label from bed.
Always use the recommended size mattress or mattress support, or both, to help prevent
the likelihood of entrapment or falls.
Surface of mattress must be at least 5 in. (127 mm) below the upper edge of guardrails.
Do not allow children under 6 years of age to use the upper bunk.
Periodically check and ensure that the guardrail, ladder, and other components are in their
proper position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
Prohibit more than one person on upper bunk.
Always use the ladder for entering and leaving the upper bunk.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Use of a night light may provide added safety precaution for a child using the upper bunk.
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed
next to the wall, the guardrail that runs the full length of the bed should be placed against
the wall to prevent entrapment between the bed and wall.
The use of water or sleep flotation mattresses is prohibited.
STRANGULATION HAZARD–Never attach or hang items to any part of the bunk bed
that are not designed for use with the bed; for example, but not limited to hooks, belts
and jump ropes.
Keep these instructions for future reference.
Please Note: Do not
assemble using power tools.
This can cause the bolts to be
overtightened
The warning label on your bunk bed headboard is
there by law, and by law is not to be removed. The
adhesive used is difficult to peel off, will tear the
paper leaving a residue that is difficult to clean. We
recommend that you leave it where it is.
Note about Warning Labeling
Twin Twin Bunk Bed
Assembly Instructions
Page 1 of 8
WII-1118
SIZE OF MATTRESS AND FOUNDATION:
Use only mattress, which is 37 1/2" - 38 1/2" wide and 74"-75" long on upper bunk (twin size.)
Ensure that the thickness of the mattress does not exceed 6" and that the mattress surface is
at least 5" (127mm) below upper edge of guardrails.
WARNING:
Adult Assembly Required. This package contains small parts. Keep away from children.
M6 x 100mm Bolt x 16
1M6 x 70mm Bolt x 22
2M6 x 40mm Bolt x 26
3Barrel Nut x 38
5
Wood Dowel
(M10 x 40mm) x 32
6Wood Dowel
(M16 x 75mm) x 4
7Wood Screw
(M4 x 32mm) x 36
8Wood Screw
(M4 x 16mm) x 2
9Allen Key x 1
10
M6 x 30mm Bolt x 24
4
Twin Twin Bunk Bed
Assembly Instructions
Parts in Box A
1
Head /
Footboard
Panel x 4
A
Hardware list
2
Parts in Box B
Page 2 of 8
Upper Side Rail x 2
Lower Front Side Rail x 1
Lower Rear Side Rail x 1
Front Guard Rail x 2
Guard Rail
Post x 4
Ladder
Rail x 2
K
Extra Hole
Ladder
Step x 4
L
D
E
F
G
Rear Guard Rail x 2
H
J
Set of Bed
Slats x 2
M
BUpper Post
(Shorter) x 4 CLower Post
(Longer) x 4
The Posts are
marked U1-U4
U1
U2 U4
U3
L1
L2 L4
L3
The Posts are
marked L1-L4
WII-1118
Twin Twin Bunk Bed
Assembly Instructions
Assemble the
Upper Bunk
End Frames.
3
Assemble the Upper Bunk
End Frames with the
Upper Side Rail (D) and
Guard Rails (G & H).
4
Page 3 of 8
NOTE: The Front Guard Rail can be assembled so that
the Ladder can be on the Left or Right Hand side.
1
A
A
1
5
5
5
6
B
B
B
B
6
6
6
1
1
6
5
6
U1
U2 U4
U3
J
H
4
5
A
2
2
4
5
4
D
D
G
A
26
2
6
5
5
5
6
J
J
J
U1
U2
U4
U3
Use 2 People
WII-1118
Twin Twin Bunk Bed
Assembly Instructions
Bolt the Bed Slats (M) to the
Upper Side Rail (D).
5
Page 4 of 8
Use 2 People
Screw the Bed Slats (M) to the
Upper Side Rail (D).
6
3
3
3
M
D
3
3
3
3
U1
U2
U4
8
8
8
8
M
D
U1
U2
U4
U3
WII-1118
Twin Twin Bunk Bed
Assembly Instructions
Assemble the Lower Bunk
End Frames.
7
Use 2 People
Page 5 of 8
Assemble the
Lower Side Rail (E & F)
to the Lower Frame.
8
F
A
A
2
5
6
6
5
26
5
Extra Hole
E
2
L1
L2
L4
L3
Extra Hole
1A
A
1
5
5
6
C
C
C
C
6
6
6
1
1
6
5
6
L1
L2 L4
L3
WII-1118
Twin Twin Bunk Bed
Assembly Instructions
Bolt the Bed Slats (M) to the
Lower Side Rail (E & F).
9
Use 2 People
Page 6 of 8
A
3
A
3
3
M
E
3
3
3
F
L1
L2
L4
L3
3
8
8
8
8
M
E
L1
L2
L4
L3
Screw the Bed Slats (M) to the
Lower Side Rail (E & F).
10
WII-1118
7
7
7
U1
U2
U4
U3
L1
L2
L4
L3
E
Twin Twin Bunk Bed
Assembly Instructions
Join the Upper & Lower Bunk.
11
Use 2 People
3
3
L
K
K
6
3
3
6
6
6
6
6
6
6
L
L
L
Assemble the Ladder (K & L).
12
Page 7 of 8
WII-1118
L
K
E
Twin Twin Bunk Bed
Assembly Instructions
Attach the Ladder in place.13
K
99
43
K
L
E
Page 8 of 8
WII-1118
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Baxton Studio MG0045-Grey-Twin Bunk Bed Assembly Instructions

Brand
Baxton Studio
Model
MG0045-Grey-Twin Bunk Bed
Category
Baby furniture
Type
Assembly Instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents