Orava SF-19 User manual

Brand: Orava

Model: SF-19

Type: User manual

Interior stand fan

SF-19

Instruction manual EN

SF-19

2EN

The intended use of the device

The device is intended solely for forced air ventilation in the interior of residential

buildings or similar spaces intended for housing, to the extent speciﬁed

technical and operational parameters and functions, safety and user instructions and

external inﬂuences of the operating environment.

ORAVA electrical appliances are manufactured according to current state of the

engineering and recognized safety-technical rules. Nevertheless, incorrect or improper

use, or use contrary to designation may result in the risk of injury or endanger the life of

the user or third person, damage to the device and other material values.

1. GENERAL SAFETY INSTRUCTIONS AND WARNINGS

• This document contains important safety instructions and warnings for safe, correct and

economical operation of the electrical equipment. Its compliance helps the user avoid

risks, increase reliability and product life.

• In this document, the general term product is used in text parts such as:

electrical equipment - any device used for the production, conversion, transmission,

distribution or use of electricity.

• From the point of view of the purpose of using electricity, the concept of electrical

equipment in the strict sense of the word will include the following categories:

- household electric appliances,

- information and communication equipment,

- consumer electronics,

- lighting equipment,

- electrical and electronic tools,

- toys and equipment for sporting and recreational purposes,

- medical devices (aids),

- monitoring and control devices,

- vending machines.

1.1 General safety instructions

• Before operating the unit, we recommend that you carefully read the instruction manual

and operate the equipment in accordance with the instructions!

• The safety instructions and warnings in this manual do not cover all the possible

conditions and situations that may arise when using the device. The user must

understand that a factor that cannot be incorporated into any of the products is personal

responsibility and caution. These factors must therefore be ensured by users serving

this device.

• Failure to follow the safety instructions and warnings is forbidden by the manufacturer

for any damage to health or property!

• Keep the instruction manual as close to the device as possible throughout its service

life. Always keep the instruction manual together with the appliance for future use and

use by new users.

• Use the appliance only for the intended purpose and in the manner speciﬁed by the

manufacturer.

• The appliance is intended for home and similar indoor use without special focus.

• This appliance is intended, in addition to domestic use, for the following uses:

- in shops, ofﬁces and other similar work environments;

- in economic buildings;

- in hotels, motels and other residential environments;

- in bed and breakfast establishments.

• It is not a professional device for commercial use.

3EN

• Do not change the technical parameters and features of the device by unauthorized

modiﬁcation or modiﬁcation of any part of the device.

• The manufacturer is not responsible for damages caused during transportation, misuse,

damage or destruction of the equipment due to adverse weather conditions.

1.2 Safety of the operating environment

• Do not use the device in an industrial environment or outside environment!

• Do not expose the appliance to:

- sources of excessive heat or open ﬂame,

- dripping or splashing water,

- vibration and excessive mechanical stress,

- insects, animals and plants,

- aggressive and chemical substances.

• The operating environment of the device must always be in accordance with the basic

characteristics set out.

• Features of the operating environment:

1. Ambient temperature: +5 ÷ +40 ° C

2. Humidity: 5 ÷ 85%

3. Altitude: ≤ 2 000 m

4. Occurrence of water: intermittent condensation of water or occurrence of water vapor

5. Occurrence of foreign bodies: quantity and type of dust are insigniﬁcant

6. Protection degree: min. IP20 (device protected from touching dangerous parts by hand

and non-waterproof)

• This degree of protection is not indicated on the product and on the technical

parameters in the operating instructions.

• If the protection class of the product is different from IPX0, this information is then

displayed on the label of the appliance or in the technical data of the operating

instructions.

• Other characteristics of the domestic operating environment (mechanical stress -

vibrations and vibrations, occurrence of plant, animals, weather effects ...) are negligible

in terms of effect on the correct and safe use of electrical equipment.

1.3 Electrical safety

• Before connecting the appliance to the power supply for the ﬁrst time, make sure that

the voltage on the appliance label corresponds to that of the household electrical outlet.

• The electric appliance is designed to power from 1 / N / PE ~ 230 V 50 Hz.

• The electrical safety of the appliance is guaranteed only if it is properly connected to the

mains.

• Electrical protection class I equipment is equipped with a protection against electric

shock by means of protective earthing of inanimate parts, which can become dangerous

when the device is malfunctioning. Always connect such devices to properly installed

mains sockets that are equipped with earthing conductors and have a properly

grounded earthing conductor.

All electrical equipment is equipped with a three-wire power supply.

• Class II electrical equipment is protected against electric shock by double insulation or

by enhanced insulation of hazardous live electrical parts. Device of protection class II it

must not be equipped with means to connect protective earthing.

All electrical equipment is equipped with two-wire power supply.

• Class III electrical equipment is a device that is powered by a small safe voltage source

(battery or accumulator) and does not present any danger to the user from electrical

shock.

• In order to provide increased safety against the risk of electric shock due to the use of

electrical appliances by laypersons, it is recommended to install the power supply circuit

for sockets with a rated current not exceeding 20 A RCD with a rated operating current

not exceeding 30 mA.

To ensure the safety and correctness of the electrical installation, consult a qualiﬁed

electrician.

• Only use a power cord with a plug (mains lead) supplied with the device and compatible

with a wall socket. Using another cable may result in ﬁre or electric shock.

• Always connect an electrical appliance to an easily accessible mains socket. In the

event of an operating fault, the appliance must be switched off as soon as possible and

disconnected from mains supply.

• The power cord and mains plug must always be easily accessible for safe disconnection

of the electrical appliance from the power supply.

• Do not pull off the power cord by pulling the cable. Disconnect the power cord by pulling

the plug behind the power cord plug.

• If you use an extension cord, make sure that the total rated power of all devices

connected to the extension cord does not exceed the max. current load on the extension

cable.

• If you need to use an extension cord or power supply block, make sure that the

extension cord or power pack is plugged into a power socket, and not to another

extension cord or power supply. The extension power cord or power supply block

must be designed for grounded electrical plugs and connected to a properly grounded

electrical socket.

• The power plug of the appliance must be compatible with the mains socket. Never

use any adapters or modify the socket in any other way. Do not use inappropriate or

damaged drawers!

• To avoid electrical shock, plug the power cables into properly grounded electrical

sockets. If the device is equipped with a 3-pole plug, do not use adapters that do not

have a grounding element or remove the grounding element from the plug or adapter.

• Do not bend, crush or otherwise expose the power cord of the appliance to mechanical

stress or external heat sources. Damage to the power cord may result in electric shock.

• When the power cord is damaged, disconnect the appliance from the mains and do not

use it again.

• If the power cord is damaged, it must be replaced by the manufacturer, its service

department or a similarly qualiﬁed person to avoid the risk of electric shock.

• Regularly check and maintain the electrical appliance as well as the power cord and

power socket. Disconnect the power plug regularly and clean it if necessary. Pollution by

dust or other substances may cause disruption of the insulating state and consequently

ﬁre.

• Do not expose the appliance to water or moisture. The ingress of water into the

appliance increases the risk of electric shock.

If the power cord is wet or the water has penetrated the water, disconnect it immediately

from the mains. If the appliance is plugged into a mains socket and if possible, turn off

the power circuit before attempting

unplug the power. If you are pulling wet wires from a live power source, be very careful.

• If the electrical equipment is installed (connecting) the protective covers are dismantled,

the electrical parts must not be accessible to the user when the installation is ﬁnished.

4EN

1.4 Safety of persons

• This appliance is intended for use and operation by persons without electrotechnical

qualiﬁcation - lay people, according to the instructions speciﬁed by the manufacturer.

• Device operation includes activities such as switching on and off, user manipulation and

setting of operating parameters, visual or auditory inspection of the equipment, and user

cleaning and maintenance.

• This appliance can be used by children under the age of 8 and persons with reduced

physical, sensory or mental capabilities or lack of experience or knowledge when

supervised or instructed to use the appliance safely and understand the dangers

involved.

• Children may not play with the appliance.

• Cleaning and maintenance for users may not be performed by children unattended.

• Always keep the appliance out of reach of children during use and operation. Be sure to

download the appliance even for a freely accessible power cord.

• Always be careful when operating the electric appliance! Do not use an electric

appliance if you are overly tired, under the inﬂuence of medication or narcotic drugs that

reduce attention and focus.

• Inattention during operation may result in serious injury.

1.5 Cleaning, maintenance and repairs

• Observe the normal user cleaning and maintenance of the appliance in the

recommended way. Do not use solvents or harsh cleaners for cleaning. Pollution

and visible stains from ﬁnger contact, respectively. The hands can be cleaned using

detergent detergents specially designed to clean household appliances.

• If you do not use the appliance, clean it or disconnect the appliance from the power

supply when the appliance is faulty.

• Electrical appliances that are cleaned after use and are not intended to be completely or

partly immersed in water or other liquid, protect against the effects of dripping and / or

splashing water and before immersion.

• Electric household appliances, like all other technical devices, are subject to the

surrounding environment and natural wear. Since the legal framework of regular

maintenance is not laid down for lay-in electrical household appliances, the

manufacturer recommends that the user have the appliance checked and cleaned at

least once a year by a specialist workshop.

• By doing so, it is possible to achieve safety, operational reliability and increased service

life.

• Do not disassemble the electric appliance! The appliance works with a dangerous

voltage. For this reason, always switch off the appliance and disconnect it from the

mains supply during user maintenance. In the event of a fault, please have the repair

serviced by an authorized service center.

• Before calling a service:

1. Verify that you are unable to remedy the malfunction yourself according to the

procedure described in the chapter „Remedy of operating faults“.

2. Turn the appliance off and on to make sure the fault reappears.

3. If the malfunction of the appliance still persists after these operations, call the nearest

specialist service center.

• Never repair the electric appliance yourself!

• Unauthorized, unqualiﬁed and improper use of an electric appliance may result in

electric shock or other serious injury.

• Only carry out the warranty or post-warranty repair of an electrical appliance to an

authorized qualiﬁed person (*).

(*) Competent qualiﬁed expert: the sales department of the manufacturer or importer or the person qualiﬁed

and authorized to carry out this type of activity with the ability to avoid all risks.

5EN

2. Special Safety Instructions.

Read carefully!

• Electrical equipment is designed and manufactured in such a way as

to allow for safe operation and use by persons without a professional

qualiﬁcation. Despite all measures taken by the manufacturer for safe use,

handling and use, they carry with them some residual risks and associated

potential hazards.

• The following symbols and their meanings have been used on the device

and in the accompanying documentation to warn of possible hazards

This symbol alerts users that the device is operating a dangerous

electrical voltage. Do not remove protective covers on the device.

Failure to observe the safety instructions during use and operation of

the device may result in:

Danger of electric shock!

Danger of serious injury or life threatening!

This symbol alerts users to the following: Risk of serious injury or

life threatening when not following the safety instructions when using

and operating the unit!

Danger of damage to equipment or other damage to property!

This symbol means that the product is made with a double insulation

between hazardous live parts (parts with dangerous voltage from the

mains) and parts that are accessible in normal use.

Transportation / Transfer

• When transporting and using, for example, of the transport carriage be

careful when moving, to avoid overturning the device.

• Transport / carry the equipment only after thorough inspection of the space

and the routes, which must be unobstructed.

• Transfer the device ﬁrmly to the stand or to the ﬁxed parts of the body.

• Never carry the machine while it is in operation. Do not carry the device

while it is plugged into a wall outlet.

• Make sure that your hands and equipment are not damp or slippery when

carrying.

There is a risk of serious injury!

There is a risk of damage to the device!

Unpacking / Packaging

• Unpack and remove all parts and accessories of packaging materials,

labels, and labels before putting the device into operation. Keep all

packaging materials in a safe place or keep them out of the reach of

children and inappropriate persons.

There is a risk of serious injury!

There is a risk of choking! 6EN

Check / Commissioning

• Clean the machine before ﬁrst use as described in the „Commissioning“ or

„First use“ section.

• Do not clean the device (body with electrical parts and control panel) and

the power cord with the plug in a way under running water, which may

cause liquid to enter the device.

• Clean these parts with a slightly moistened cloth and wipe dry or let it dry.

• Only clean the appliance if it is switched off and disconnected from the

mains.

• We recommend performing both initial and subsequent regular machine

inspections.

• Before ﬁrst use or after long-term storage, check that the propeller blades

are free to rotate and are not deformed or damaged. Always check if the

appliance is disconnected from the power supply.

• Do not attempt to interfere with the construction or adjustment of the

component parts in any way.

• Never use the appliance if it is incomplete, damaged, or any part of it has

been damaged during use. Have the appliance repaired by a specialist

workshop.

There is a risk of serious injury!

There is a risk of electric shock!

There is a risk of electrical short circuit!

• Do not turn on the device unless it is fully and properly assembled and

ready for use.

• The device is supplied in a partially disassembled state.

• The complete assembly of the device must be carried out in accordance

with the manufacturer‘s instructions. Incorrect procedure can result in injury

to persons, animals or damage to property.

• Ensure that the propeller cover is correctly and fully assembled and

securely closed. Failure to follow the correct assembly procedure: There is

a risk of serious injury!

Location / Installation

• The appliance is intended for use as a stand-alone appliance. Do not attach

the appliance to the building parts of the living areas - walls, ceilings, etc.

Warning!

• Do not place or operate the appliance where it is likely to overturn it. Only

use the device on a horizontal, ﬂat, stable mat - on the table or on the ﬂoor.

7EN

Table fan

• Only place the machine on straight, ﬁrm and stable pads - for work desks

and furniture parts, suitable for the placement of electrical equipment.

• Do not place the appliance on sloping decorative fabrics, tablecloths, etc.

Stand fan

• Only place the appliance on ﬂat and stable underlay - ﬂoors and ﬂoorings

that have a stable and solid structure (eg wood, ceramic tiles, etc.). Do not

place the appliance on ﬂoorings that have an unstable structure such as:

carpets or other decorative ﬂooring with long ﬁbers.

• Do not place or operate the appliance on „soft“ surfaces, bed mattresses,

upholstered sofa beds, and so on.

• Always make sure that the place you want to place the device has enough

space, stability, mechanical strength and adequate lighting.

• Do not place the appliance:

- unstable tables or inappropriate parts of furniture,

- to unstable decorative ﬂoor coverings,

- on an uneven and dirty surface,

- on the sealing edge of tables or parts of furniture,

- near containers with water or other liquids.

Warning!

• Place the device in a place where children cannot reach freely. Work desks

and furniture for placing should not be less than 85 cm.

• Prevent children from handling the device. The device may become

overwrought and cause serious injury to them. Mechanical damage

(breakage or breakage of parts and covers) of the device can cause

serious injury.

• Do not place or use the appliance near bathtubs, showers, washbasins and

other containers containing water, including the pool. If the appliance falls

into the water, do not remove it. First, pull the power cord plug out of the

mains socket and then select the appliance from the water. In such cases,

take the device for inspection to a specialist service to check that it is safe

and working properly.

There is a risk of electric shock!

There is a risk of electrical short circuit!

• Do not expose the device to:

- direct sunlight, sources and equipment producing heat,

- vibration and mechanical stress,

- excessive dust,

- water and excess moisture,

- insect,

- aggressive effects of the external environment.

There is a risk of serious injury!

There is a risk of damage to equipment or other property damage!

8EN

9EN

Operation / Supervision

Warning!

• Use the device only if it is complete, undamaged and fully functional.

Never use a device that has a damaged fan cover.

• When handling equipment (eg when cleaning the propeller blades)

when removing the propeller guard, disconnect the appliance from the

power supply.

• Always make sure that the device is disconnected from the power

supply and that the device is safe.

• Before removing and reassembling the propeller guard, ensure that

the cover is properly secured with the safety catch and safety bolt.

• Always keep the unit under constant supervision during use and

operation!

• This appliance is not intended to be operated via an external

programmer, automatic timer or remote control because there is a risk

of ﬁre when the appliance is covered or incorrectly placed.

• Do not leave the appliance unattended during operation, especially if

there are children, inappropriate persons or animals nearby.

• If the device is not in operation or you leave the device unattended,

disconnect the power cord from the power supply. Do not leave

the power cord of the device free and accessible so that children,

inappropriate persons or animals can not overturn or overwrite the

device.

There is a risk of serious injury!

There is a risk of damage to equipment or other property damage!

Warning!

• Do not use the appliance in a ﬁre or explosive environment in the

presence of ﬂammable substances and vapors, mist or dust, and

under atmospheric conditions, where air is easily propagated after

ignition.

• Do not use the appliance near gas stoves or open ﬂame sources.

There is a risk of explosion and/or ﬁre!

• Make sure that the main switch is set to „OFF” /“0“ position before

each connection to the mains.

• Do not switch the device on or off by plugging in or pulling out the

power cord from the AC socket.

• Always connect the appliance to mains power supply for normal use,

then turn on the main power switch.

• When you have ﬁnished using the appliance, turn off the main switch

and then pull the mains cord out of the mains socket.

• Do not use the device if the main power switch does not work on the

device.

• The device is under dangerous voltage when the power supply is

connected.

• Do not cover the device in any way. Do not load or allow the foreign

bodies to enter the holes of the device covers. Do not cover the

openings of the airﬂow covers. Air ventilation ensures safe and reliable

operation of the device.

• Do not place objects on the device, do not allow foreign bodies to

enter the holes. Do not use the device near freely moving textiles -

curtains, curtains, etc. Air movement due to the operation of the device

may cause the fabric to be pulled into the space of the rotating parts.

• Ensure that no environmental dirt, such as dust, clumps of dust, ﬁbers,

and the like.

• Take care during the use and operation of the appliance to avoid

getting in touch with the rotating parts with your ﬁngers, hair, loose-

ﬁtting chains or loose clothing.

There is danger of trapping!

• The device contains sharp-edged rotating parts. Never place your

ﬁngers in the space with these parts and do not bend any other

objects.

• Always wait for the rotating parts to stop completely before handling

the device.

There is a risk of serious injury!

• Never overload the equipment beyond the limits speciﬁed by the

technical speciﬁcations!

• If you experience any unusual symptoms (smell, sound ...) while using

the device, turn it off immediately and unplug it from the mains. Have

the appliance checked by a specialist workshop.

• Do not expose yourself or other people to long-term exposure to

strong draft air from the device. It can have a negative impact on your

health as well as on other people‘s health.

• If any safety component / component (mechanical, electrical /

electronic) is part of the device, never disable this part / component! If

the safety component / component is damaged or not working, do not

use the appliance!

• Never underestimate the potential hazards and take extreme caution

!!!

10EN

Part description

1 Front cover

2 Propeller

3 Rear cover

4 Oscillator switch

5 Engine

6 Control panel

7 Power cord

8 Mounting screw on the extension

tube of the stand

9 Plastic cap

10 Engine shaft

11 Rear cover attachment nut

12 Thread cap (left thread)

13 Power switch + speed and light switch

14 Fastening tube sleeve

15 Pedestal cover

16 Pedestal bolts

17 Plastic legs

18 Rubber legs

19 Base (2 parts)

20 Propeller tilt joint

21 Light signaling

22 Extension tube of the stand

23 Terminal clamp

11EN

21 11

16 15

Assembly

1 Remove the cover (12), loosen and remove the nut (11) on the motor and attach

the rear cover (3) to the motor shaft (10) and secure with the nut (11).

2 Fit the propeller (2) onto the motor shaft (10) and secure it with the

threaded cap (12). The screw cap has the opposite left thread.

3 Attach the front cover (1) to the rear cover (3) in the correct position and

snap the covers (1, 3) together with the buckles.

12EN

13EN

4 Connect the bases (19) according to the type to create a cross-shaped

base. Screw the base with the screw (16) with the clamp (23) and slide the

supplied feet (17, 18).

5 Release the pipe retaining sleeve (14), slide the base cover (15) and

assemble the extension tube (22).

6 Fit the entire engine body (5) onto the extension tube (22) and secure it

with the retaining sleeve (14) and the screw (8).

Operation

Before using this device for the ﬁrst time

• Remove all protective foils and packaging material from the device.

1 Connect the fan to the 230V ~ 50Hz power supply.

2 Switch on the fan with one of the three buttons on the switch (13) at the

desired speed of the propeller.

3 If necessary, activate the oscillation mode by pressing the oscillator switch

(4).

Cleaning and maintenance

In order for the fan to function properly, it needs regular cleaning.

1. Switch off the device, disconnect the power cord from the mains and allow

the motor to cool completely.

2. Disassemble the device with the reverse procedure as described in the

assembly section.

3. Clean all parts from dust and dirt.

Use only a slightly moistened cloth for cleaning. Do not use any solvents,

thinners, alcohol, gasoline or abrasive cleaners. The surface may be

damaged.

4. Loosen the power cord loosely into a suitable location.

5. Store the device in a suitable location.

14EN

Technical speciﬁcations

Power supply: 230 V~ 50 Hz

Power consumption: 40 W

Protection class: II (protection against electric shock is

ensured by double insulation)

Propeller diameter: 35 cm

Max. Height: 133 cm

Weight: 2,4 kg

Noise level: 55 dB (A)

The declared noise emission of this appliance is 55 dB (A), which represents the level of

acoustic power A relative to the reference sound power level of 1 pW.

The right to change is reserved!

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC EQUIPMENT

The symbol on the product or on its packaging indicates that this product does not belong

to household waste. It is necessary to take it to a collection point for electrical recycling

and electronic equipment.

By ensuring proper disposal of this product, you will help prevent negative consequences

to the environment and human health that would otherwise be caused by inappropriate

disposal of this product. For more detailed information about recycling of this product,

please contact your local authority, your household waste disposal service or the shop

where you purchased the product.

This product meets all the essential requirements of the EU directives that apply to it.

Producer:

Importer:

ORAVA retail 1, a.s.

Seberíniho 2

821 03 Bratislava

Slovenská republika

ORAVA distribution CZ, s.r.o.

Ostravská 494

739 25 Sviadnov

Česká republika

ORAVA retail 1, a.s.

Seberíniho 2

821 03 Bratislava

Slovenská republika

Orava SF-19 User manual

Orava SF-19 User manual

Related papers

Other documents