ROOMS TO GO 21020019 Assembly Instructions

ROOMS TO GO
Brand
ROOMS TO GO
Model
21020019
Type
Assembly Instructions

This manual is also suitable for

Liberty TV Stand 53.14
Model # 200AMC6, 200AMC63, 200AMC64, 200AMC67, 200AMC69,
200AMC8, 200AMC9, 200AMC93, 200AMC94, 200AMC96, 200AMC97
888-230-2225
help@manhattancomfort.com
44
lb
The indicated values consider static weights and evenly distributed over the parts.
11
lb
Ed. 008, 2019/08 - Manhattan Comfort.
11
lb
11
lb
11
lb
11
lb
n.° ID Parts Identification (Description) Quantity
REAR VIEW FRONT VIEW
03
01
04
05
06
05
07
08
09
09
10
09
09
10
11
12
10
1
Right Side Panel
Base 1
1
Right Partition
Left Side Panel 1
2
Shelf
Left Partition 1
01
04
06
07
08
02
05
03
09
Top Panel 1
1
Door
2
Left and Right Back Panel
1
Lower Middle Back Panel
11 1
Upper Middle Back Panel
12 4
Wood Feet
02
2
INCLUDED IN THE PACKAGE
4x
A4x BC
D E F
24x
13x 7x 7x
3
GH I
13x 11x 50x
J K L
2x 8x 4x
INCLUDED IN THE HARDWARE
TOOLS NEEDED
M1x
05
01
04
03
06
05
• Fix the feet (12) under the Base (01)
with bolts (A).
• Apply the protective felt covers (L)
on the bottom of the feet (12).
• Apply the plastic covers (B) on top
of the bolts (A).
STEP 1
05
05
04
06
• Connect Shelves (05) into
Partitions (04) and (06) with
dowels (C) and bolts (D).
STEP 2
12
01
STEP 3
STEP 4
Preparing the door:
• Insert the plastic ring (M) in the
Door (08).
• Fix the hinges (J) in the Door (08)
with bolts (K), as shown in DETAIL 1.
08
• Connect Side Panels (03) and (07)
into the Base (01) with dowels (C)
and bolts (D).
• Connect Partition Parts (04) and
(06) into the Base (01) with
dowels (C) and bolts (D).
07
DETAIL 1
4
12
12
12
10
11
09
09
Fixer
bolt
Adjustment
bolt
07
02
02
08
07
05
05
01
03
04 06
STEP 7
Installing the door (08):
• Fix the hinge connectors (J) of the
Door (08) on the Right Side Panel (07)
with bolts 3.5 x 14mm (K), taking
the markings on the panel (07) as
reference for correct positioning.
The hinge connector includes two bolts,
shown in DETAIL 3. Use the fixer bolt
and the adjustment bolt to tighten,
adjust and align the door.
• Connect the Top Panel (02) onto
Side Panels and Partitions (03), (04),
(06) and (07) using dowels (C)
and the cam lock hardware (E + F).
• After the fixing, apply the adhesive
covers (G).
DETAIL 2
05
04
03
06
05
07
02
01
02
07
• Connect Back Panels (09), (10)
and (11,) with nails (I).
• Use metallic plates (H) and
nails (I) at the joining surfaces.
STEP 6
STEP 5
DETAIL 3
5
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

ROOMS TO GO 21020019 Assembly Instructions

ROOMS TO GO
Brand
ROOMS TO GO
Model
21020019
Type
Assembly Instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents