Item no : 07492Item no : 07492 MANUFACTURING LTD.
English/French
HITCH MOUNT BICYCLE CARRIER INSTRUCTION
STEP 1
Hardware Needed:
Qty 1: Pin (Part #16)
Qty 1: “R” Pin (Part #17)
See gure #1 below. Attach turn elbow plate (Part #22) onto
hitch base (Part #23) using M16X90 bolt (5/8” x 3.5”),
M16 (1/2”) nut and washer (see specic hole location below).
Next, insert pin (Part #16) to the second hole (see below) using
“R” pin and washer to secure it.
STEP 2: Attach bottom support to turn plate from step 1
Hardware Needed:
Qty 1: Center support (Part #21)
Qty 2: Bolt M12X75 (1/2” x 2 3/4”) (Part #9)
Qty 2: 12 (1/2”) Washer (Part #10)
Qty 2: Nut M12 (1/2”) (Part #11)
See gure #2 below. Attach under support into the
turn plate using M12X75 (1/2” x 2 3/4”) bolt,
M12 (1/2”) nut and washer.
FIGURE 1
FIGURE 2
Page 1/3
(5/8” x 3.5”)
(1/2” x 4”)
(1/2”)
(1/2”)
(5/8”)
(1/2” x 2 3/4”)
Item no : 07492
MANUFACTURING LTD.
English/French
Item no : 07492
STEP 3: Attach Top Support Plate
Hardware Needed:
Qty 1: Elbow Support Part (Part #24)
Qty 1: Bolt M10 (3/8”) (Part #1)
Qty 1: 10 spring washer (Part #2)
Qty 3: 10 washer (Part #3)
Qty 1: Bolt M10X60 (3/8” x 2.25”) (Part #4)
Qty 4: Plastic (Part #5)
Qty 1: Nut M10 (3/8”) (Part #8)
Qty 1: “W” Plate (Part #19)
Note that the “W” Plate (Part #19) and plastic
(Part #5) are pre assembled. Next place “W”
plate onto the elbow support (Part #24). Attach
the elbow support (Part #24) onto bottom
(under) center support (Part #21) using M10X60 (3/8” x 2.25”) bolt
(Part #4), M10 (1/2”) nut (Part # 8) and two washers (Part #3)
FIGURE 3
Page 2/3
(3/8” x 2.25”)
(3/8”)
(1/2”)
STEP 4: Connect assembled Join Tube
Hardware Needed:
Qty 1: Bike holder tube (Part #20)
Qty 1: Bolt M10 (Part #1)
Qty 1: 10 spring washer (Part #2)
Qty 3: 10 washer (Part #3)
Qty 4: Plastic (Part #5)
Qty 1: 12 Pin (1/2”) (Part #6)
Qty 1 Bolt M10 (Part #7)
Qty 1: Bike Holder Plate (Part #18)
Note the bike holder plate (Part #18) and plastic (Part #5) are
Pre-assembled onto the bike holder tube (Part #20). Connect the bike holder tube
(Part #20) onto the elbow support (Part #24) with 12 pin (Part #6)
Item no : 07492
Item no : 07492Item no : 07492 MANUFACTURING LTD.
English/French
Warranty
Warranty Qualications
Effective from the day you purchase the product. Please keep your dated purchase invoice as proof.
Repair/Replacement Warranty
Erickson Manufacturing Ltd. warrants to the original purchaser that the mechanical components will be free of defect in
material and workmanship for 90 days from the original date of purchase.
Transportation charges on product submitted for repair or replacement under warranty are the sole
Responsibility of the purchaser. This warranty only applies to the original purchaser and is not
transferable.
Do Not Return The Unit to the Place of Purchase
Contact Erickson Manufacturing Ltd’s Technical Service and service people will troubleshoot any
issue via phone or email. Repairs or replacements without prior authorization, or at an unauthorized repair facility, will not
be covered by this warranty.
Warranty Exclusions
This warranty does not cover the following repairs and equipment:
Normal Wear
This warranty does not cover the repair when use has exhausted the life of a part or the equipment as a whole.
Installation, Use and Maintenance
This warranty will not apply to parts and/or labor if this product is deemed to have been misused,
neglected, involved in an accident, abused, loaded beyond specications, modied, or installed
improperly. Normal maintenance is not covered by this warranty.
Other Exclusions
This warranty excludes:
• Cosmetic defect such as paint, decal etc.
• Wear items
• Accessory parts
• Failures due to acts of God and other force majeure events beyond the manufacturer’s control.
• Problems cause by parts that are not Erickson Manufacturing Ltd. parts.
Limits of implied Warranty and Consequential Damage
Erickson Manufacturing Ltd. disclaims any obligation to cover any loss time, use of this product, freight, or any incidental
or consequential claim by anyone from using this product. THIS WARRANTY IS IN LIEU OF ALL OTHER
WARRANTIES EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE. A unit provided as exchange will be subject to the warranty of the original unit. The length of
the warranty governing the
exchanged unit will remain calculated by reference to the purchase date of the original unit. This
warranty gives you certain legal rights which may change from state to state. Your state may also have other right you
may be entitled to that are not listed within this warranty.
Contact Information
Marine City, Michigan 48039
Thamesville, Ontario N0P 2K0
Toll Free: 1-888-546-4668
Page 2/3 Page 3/3
/
