1x
Hammock
4x Assembling screws with wingnuts
8x Washers
8x Mounting screws and wall plugs
2x Mounting rails
Part List
Skywalks Wall
Mounted Hammock
Thank you for purchasing the Skywalks Wall
Mounted Hammock. This Hammock has been
designed for use by cats only. Keep away from
children. Do not stand on or sit in the hammock.
Link to the
instructional video
On a wooden surface you will be able to use the mounting screws
to drill the mounting rail directly to the surface.
Note: Ensure the 2 assembly holes on the rail are facing upwards.
Drill the second Mounting Rail into position whilst ensuring the
hammock is taught.
Insert the 4 Assembly Screws with a Washer through the holes at the top of
the Hammock. Secure using another washer and Wingnut from underneath
the Hammock. Your Skywalks Cat Hammock is now complete.
If you are installing onto a brick wall, we recommend to first mark out where
the hammock will be installed and then pre-drilling and hammering in wall
plugs. This will help anchor the hammock to the surface.
Note: Ensure the Mounting Rails are securely fastened to the wall, and the
Hammock is pulled tight and is stable before allowing your cat to use it.
6
Slide the second rail into the other side hem of the Hammock, pull it
across to stretch out the Hammock, and hold the rail up against the wall.
5
Slide the side hem of the Hammock over the mounted rail. 43
2
TIMBER WALLBRICK WALL
1
By use of the supplied products, the customer acknowledges the
standard terms and conditions of sale which can be found here at:
AU: www.catnets.com.au/pages/terms-conditions-of-service
NZ: www.catnets.co.nz/pages/terms-conditions-of-service
Catnets Australia
www.catnets.com.au
(02) 9772 0889
Catnets New Zealand
www.catnets.co.nz
+612 9772 0889