Advance Tabco FS Series: This versatile sink is designed for a wide range of applications, including food preparation, manufacturing, cooking, laboratory work, and service areas. Its durable construction ensures longevity and reliability, making it an ideal choice for demanding environments.
CHECK FOR CONCEALED DAMAGE
FILE CLAIM WITH DELIVERING FREIGHT CARRIER
Sinks manufactured by ADVANCE TABCO
®
are designed and constructed for the use of
liquid containment. Suggested applications include Food Preparation, Manufacturing, Cooking,
Laboratory and Service and the like. ADVANCE TABCO
®
does not recommend product use for activities
employing harsh and active chemicals. Please consult factory regarding unusual applications.
Installation Instructions for
FC, FE & FS SERIES SINKS
FE Series
FC Series
FS Series
Step 1
Carefully remove contents of carton/crate. Carefully position
sink upside down on a protected surface so you can access the
underside of the sink. Install leg assembly into gussets at each
end (Figure 1).
Step 2
Tighten each Set Screw using 5/32” Allen Wrench (Figure 2).
THIS CARTON CONTAINS:
• Sink Unit
• Leg Assembly
• Drains (1 For Each Sink Bowl)
TOOLS NEEDED (Not Included):
5/32” Allen Wrench
PLEASE NOTE: Some models may require Set
Screws to be inserted into the Set Screw Holes.
Figure 1
Figure 2
☞
Step 3
Carefully turn sink over onto
its legs. Check for stability and
adjust Bullet Feet as necessary
(Figure 3).
Figure 3
Optional K-06
Faucet Mounting Kit Available
(Not Included)
Sink
Bottom
K-6 Basket
Drain shown
1/4” continuous
bead of Plumber’s
Putty or Silicone
Sealer.
Rubber Washer
Paper Washer
Die Cast Nut
Step 4
Install drain(s) & faucet. Your knowledgeable plumbing contractor
is responsible for local code requirements. You can also visit our
website at advancetabco.com/support for drain & faucet details.
Drain Installation Details
Faucet Installation Details
Spout
Tile Edge
Flanged
Washer
Teflon Tape or Thread
Sealer on 1/2’ x Close
Nipple.
These pieces are supplied
in an optional Mounting Kit
K-06 (Figure 4) or by the
plumber.
Faucet
Body
Faucet Mounting
Flange
Splash
Rubber
Washer 90º Sink
Elbow
Figure 4
EDGEWOOD, NY 11717-8380
© ADVANCE TABCO, MARCH 2016
Splash
Splash
Silicone Sealer
1”
Wall
Wall
NOTE: NSF installations require sink unit to be installed
to wall or at least 1” of the wall (Figure 5).
Figure 5
For Additional Assistance,
Please call Customer Service at:
1-800-645-3166
1
2
3
4
Novatto NSFC-168T001ORB User manual
American Standard 9981004.020 Installation guide
Novatto GF-001ORB-T-PUD User manual
Jet Tech 747 Installation guide
Novatto NSFC-01317136SCH User manual