Advance Tabco FC Series Installation guide

Brand: Advance Tabco

Model: FC Series

Type: Installation guide

This manual is also suitable for

CHECK FOR CONCEALED DAMAGE

FILE CLAIM WITH DELIVERING FREIGHT CARRIER

Sinks manufactured by ADVANCE TABCO

are designed and constructed for the use of

liquid containment. Suggested applications include Food Preparation, Manufacturing, Cooking,

Laboratory and Service and the like. ADVANCE TABCO

does not recommend product use for activities

employing harsh and active chemicals. Please consult factory regarding unusual applications.

Installation Instructions for

FC, FE & FS SERIES SINKS

FE Series

FC Series

FS Series

Step 1

Carefully remove contents of carton/crate. Carefully position

sink upside down on a protected surface so you can access the

underside of the sink. Install leg assembly into gussets at each

end (Figure 1).

Step 2

Tighten each Set Screw using 5/32” Allen Wrench (Figure 2).

THIS CARTON CONTAINS:

• Sink Unit

• Leg Assembly

• Drains (1 For Each Sink Bowl)

TOOLS NEEDED (Not Included):

5/32” Allen Wrench

PLEASE NOTE: Some models may require Set

Screws to be inserted into the Set Screw Holes.

Figure 1

Figure 2

☞

Step 3

Carefully turn sink over onto

its legs. Check for stability and

adjust Bullet Feet as necessary

(Figure 3).

Figure 3

Optional K-06

Faucet Mounting Kit Available

(Not Included)

Sink

Bottom

K-6 Basket

Drain shown

1/4” continuous

bead of Plumber’s

Putty or Silicone

Sealer.

Rubber Washer

Paper Washer

Die Cast Nut

Step 4

Install drain(s) & faucet. Your knowledgeable plumbing contractor

is responsible for local code requirements. You can also visit our

website at advancetabco.com/support for drain & faucet details.

Drain Installation Details

Faucet Installation Details

Spout

Tile Edge

Flanged

Washer

Teflon Tape or Thread

Sealer on 1/2’ x Close

Nipple.

These pieces are supplied

in an optional Mounting Kit

K-06 (Figure 4) or by the

plumber.

Faucet

Body

Faucet Mounting

Flange

Splash

Rubber

Washer 90º Sink

Elbow

Figure 4

EDGEWOOD, NY 11717-8380

Splash

Silicone Sealer

1”

Wall

NOTE: NSF installations require sink unit to be installed

to wall or at least 1” of the wall (Figure 5).

Figure 5

For Additional Assistance,

Please call Customer Service at:

1-800-645-3166

Advance Tabco FC Series Installation guide

Brand: Advance Tabco

Model: FC Series

Type: Installation guide

This manual is also suitable for

Download PDF

report

Advance Tabco FC Series Installation guide

This manual is also suitable for

Advance Tabco FC Series Installation guide

Related papers

Other documents