Federal Brace 40198 Installation guide

Brand
Federal Brace
Model
40198
Type
Installation guide

This manual is also suitable for

Federal Brace 40198 is engineered to provide superior support for your mantel, fireplace, or other decorative elements. Constructed from durable 3/8" metal, this bracket boasts a load-bearing capacity of 750 lbs per pair, ensuring reliable support for even the heaviest of mantels.

Designed for versatility, the Federal Brace 40198 can be effortlessly installed into various surfaces, including sheetrock, brick, and mortar. Its four 1/4" countersunk holes on the back flange provide secure attachment, while the recommended spacing of 40" between brackets ensures optimal support.

For added convenience, the Federal Brace 40198 comes with pre-drilled pilot holes in the studs, allowing for precise and hassle-free installation. The bracket's sturdy construction and meticulous design guarantee a secure and long-lasting installation, giving you peace of mind and enhancing the aesthetics of your living space.

Federal Brace 40198 is engineered to provide superior support for your mantel, fireplace, or other decorative elements. Constructed from durable 3/8" metal, this bracket boasts a load-bearing capacity of 750 lbs per pair, ensuring reliable support for even the heaviest of mantels.

Designed for versatility, the Federal Brace 40198 can be effortlessly installed into various surfaces, including sheetrock, brick, and mortar. Its four 1/4" countersunk holes on the back flange provide secure attachment, while the recommended spacing of 40" between brackets ensures optimal support.

For added convenience, the Federal Brace 40198 comes with pre-drilled pilot holes in the studs, allowing for precise and hassle-free installation. The bracket's sturdy construction and meticulous design guarantee a secure and long-lasting installation, giving you peace of mind and enhancing the aesthetics of your living space.

www.federalbrace.com (877) 353-8899
Mantel Bracket | Breckenridge
Every successful mantel installation begins with good planning
and action. Do not wait until the last minute to order your mantel
supports, fasteners or adhesives for installation. Make sure that
all aspects of the support substructure are considered and dis-
cussed to ensure that your mantel installation will be smooth and
that your mantel support products will be sufcient.
Note this installation document should not be considered a
specic recommendation for your particular application. Federal
Brace cannot provide installation guidelines to meet the partic-
ulars of every application. This document should be considered
a help sheet that provides considerations about the general
characteristics of a particular type of support and installation.
Characteristics
Our Mantel Brackets are designed to provide the strength that
comes from 3/8” metal bracket. The carrying capacity of the
Mantel Brackets is 750 lbs per pair. Each mantel bracket has 4
1/4” countersunk holes on the back ange.
Considerations when Installing
If you are installing your mantel brackets into sheet rock, you will
need to make sure you locate the wall studs. Support brackets
must be installed in studs that are tied to the roof and oor struc-
ture. If new construction, lay out your placement and drill pilot
holes in the studs, leave cutouts in the sheet rock for visibility.
If installing in cement or brick and mortar be sure to have the ap-
propriate drill bit for masonry and lag shields for your fasteners.
Remember, a weak substructure and/or mounting process makes
for a weak installation.
Your Federal Brace Mantel brackets should not be spaced more
than 40” apart for a standard application. Once placement is
determined, attach your rst bracket. Make sure that when you
fasten your bracket that you check for level in all directions. Your
bracket should be level horizontally as well as vertically. Continue
to install your brackets checking level in the same way each time
and across consecutive brackets.
Once all the brackets are in place, you will want to wipe them
down to get rid of any handprints or other debris. Just before
installation of you mantel you will need to apply adhesive or
silicone to the top of the bracket to adhere it to the mantel.
Once the mantel is in place, you can caulk around the edge of
the brackets if you choose. This will give greater adherence to
the mantel and cover any gap between the brackets
and mantel.
Final step is to enjoy your work and your new replace mantel.
We are happy that you chose to support your beautiful mantel
with Federal Brace brackets. We would be thankful if you would
send us images of your new replace and our brackets under
your mantel. We enjoy seeing Federal Brace supports at work.
Also, know that the highest compliment Federal Brace can be
given is a reference from our customers to friends and family. If
you have enjoyed your buying experience with Federal Brace
please let someone know.
Breckenridge Mantel Bracket
Installation Instructions
For any questions or comments please to contact us by email at [email protected] or by phone at (877) 353-8899.
If you are a visual learner, check out our installation videos on our YouTube channel Don’t forget to share your projects with your
new Federal Brace brackets on Twitter and Instagram, just tag us @FederalBrace. Like us on Facebook, and check out our boards
on Pinterest for more home improvement/decor and DIY project ideas.
  • Page 1 1

Federal Brace 40198 Installation guide

Brand
Federal Brace
Model
40198
Type
Installation guide
This manual is also suitable for

Federal Brace 40198 is engineered to provide superior support for your mantel, fireplace, or other decorative elements. Constructed from durable 3/8" metal, this bracket boasts a load-bearing capacity of 750 lbs per pair, ensuring reliable support for even the heaviest of mantels.

Designed for versatility, the Federal Brace 40198 can be effortlessly installed into various surfaces, including sheetrock, brick, and mortar. Its four 1/4" countersunk holes on the back flange provide secure attachment, while the recommended spacing of 40" between brackets ensures optimal support.

For added convenience, the Federal Brace 40198 comes with pre-drilled pilot holes in the studs, allowing for precise and hassle-free installation. The bracket's sturdy construction and meticulous design guarantee a secure and long-lasting installation, giving you peace of mind and enhancing the aesthetics of your living space.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents