www.federalbrace.com (877) 353-8899

Cabinet Supports | Jefferson

Every successful installation begins with good planning and

action. Do not wait until the last minute to order your support,

fasteners or adhesives for installation. Make sure that all aspects

of the support substructure are considered and discussed to

insure that your vanity installation will be smooth and that your

vanity support will be sufcient.

Note that this installation document should not be considered a

Jefferson Hidden Cabinet Bracket

The Jefferson Hidden Cabinet Brackets are designed to provide

the support strength necessary to wall mount a standard cabinet.

The Jefferson cabinet bracket is made from medium gauge

galvanized steel which is a corrosion resistant material for humid

environments. The bracket has a top ange and a side ange for

attaching to the top and wall inside the cabinet.

Note: the Jefferson Hidden Cabinet Bracket comes in a right

mount and a left mount orientation for the cabinet base.

Considerations when Installing the Jefferson

weak installation.

The Jefferson cabinet bracket is designed to tie into the stud

wall through the inside of the cabinet base and be hidden inside

the cabinet. It’s ush mount to the side of the cabinet wall and

2” wide anges will not interfere with drawer movement inside

the cabinet.

At this point you may want to position the bracket inside the

cabinet and mark the hole locations and drill holes through the

cabinet where it will attach to the wall. Once that is complete,

You should measure for the desired nal height of the cabinet so

the location of your cabinet and position the Jefferson bracket

inside the cabinet, and tighten the fasteners to the wall and stud.

Make sure that after you fasten the rst bracket, you check for

level across the top of the cabinet before tightening the second

JEFFERSON CABINET SUPPORTS

Installation Instructions

www.federalbrace.com (877) 353-8899

bracket. Once the brackets are in place you will want to wipe

them down to get rid of any hand prints or other debris.

The nal step is to enjoy your work and your new oating cab-

inet! We are thankful that you chose to support your beautiful

you have enjoyed your buying experience with Federal Brace

please let someone know.

For any questions or comments please to contact us by email at [email protected] or by phone at (877) 353-8899.

If you are a visual learner, check out our installation videos on our YouTube channel Don’t forget to share your projects with your

new Federal Brace brackets on Twitter and Instagram, just tag us @FederalBrace. Like us on Facebook, and check out our boards

on Pinterest for more home improvement/decor and DIY project ideas.