Federal Brace 32136 Installation guide

Brand
Federal Brace
Model
32136
Type
Installation guide

This manual is also suitable for

Federal Brace 32136 is a floating shelf support rod designed to provide a hidden, secure, and stylish way to display your favorite items. With a weight capacity of 50 pounds, these rods are perfect for supporting shelves in a variety of applications, including homes, offices, and retail spaces.

Made from high-quality steel with a black powder coat finish, Federal Brace 32136 rods are built to last. They are easy to install, with pre-drilled holes and included mounting hardware. Simply mark the desired location of your shelf, drill pilot holes, and insert the rods into the holes. Tighten the screws until the rods are secure, and then place your shelf on top.

Federal Brace 32136 is a floating shelf support rod designed to provide a hidden, secure, and stylish way to display your favorite items. With a weight capacity of 50 pounds, these rods are perfect for supporting shelves in a variety of applications, including homes, offices, and retail spaces.

Made from high-quality steel with a black powder coat finish, Federal Brace 32136 rods are built to last. They are easy to install, with pre-drilled holes and included mounting hardware. Simply mark the desired location of your shelf, drill pilot holes, and insert the rods into the holes. Tighten the screws until the rods are secure, and then place your shelf on top.

www.federalbrace.com (877) 353-8899
Shelf Supports | Floating Shelf Support Rods
Every successful installation begins with good planning and
action. Do not wait until the last minute to order your oat-
ing shelf support rods for installation. From time to time stock
replenishment may be in process and require a lead time. Make
sure that all aspects of the support or stud locations are con-
sidered and discussed to ensure that your installation will be
smooth and that your support products will be sufcient.
Note: that this installation document should not be considered a
specic recommendation for your particular application. Federal
Brace cannot provide installation guidelines to meet the partic-
ulars of every application. This document should be considered
a help sheet that provides considerations about the general
characteristics of a particular type of support and installation.
Characteristics of the Support Rods
The oating shelf support rods comes to you in raw steel or
black nish. Please keep in mind if you have selected the steel
nish that it will corrode over time if not painted. If you selected
the powder coat nish no additional protection is needed. Holes
are ¼”. The mounting plate itself is 1.5” high and 1.75” wide
and will need space to accommodate the plate for a hidden
oating application. The oating shelf rods have a 50# carrying
capacity and we recommend not to exceed this weight to avoid
seeing any deection in your installation.
Considerations when Installing
Whenever installing the Floating Shelf support rods make sure
you are tying into a minimum of 1.75” thick stud wall material.
You will want the fasteners to have as much biting material as
possible. This will provide a secure fastening of the rod.
Floating Shelf Support Rods
Installation Guidelines
www.federalbrace.com (877) 353-8899
Once you’ve selected the location to install you will need to
locate the studs. Hold the rod in place and mark your holes.
Repeat for consecutive rods. Use a drill bit slightly smaller than
the holes (0.25”) and drill pilot holes. Once the pilot holes are
drilled, place the rod in place and install fasteners. Prior to tight-
ening fasteners completely, check level across the rods. Adjust as
needed and make nal tightening of fasteners.
Federal Brace Floating Shelf Support Rods are used for multiple
purposes. The remaining steps for installation will be determined
by the type of application you are installing.
We are thankful that you chose to use Federal Brace oating
shelf support rods in your home or ofce. Please send us images
of your installation. We would love to add your work to our gal-
lery to see Federal Brace products at work.
Also, know that the highest compliment Federal Brace can be
given is a reference from our customers to friends and family. If
you have enjoyed your buying experience with Federal Brace
please let someone know.
For any questions or comments please to contact us by email at [email protected] or by phone at (877) 353-8899.
If you are a visual learner, check out our installation videos on our YouTube channel Don’t forget to share your projects with your
new Federal Brace brackets on Twitter and Instagram, just tag us @FederalBrace. Like us on Facebook, and check out our boards
on Pinterest for more home improvement/decor and DIY project ideas.
  • Page 1 1
  • Page 2 2

Federal Brace 32136 Installation guide

Brand
Federal Brace
Model
32136
Type
Installation guide
This manual is also suitable for

Federal Brace 32136 is a floating shelf support rod designed to provide a hidden, secure, and stylish way to display your favorite items. With a weight capacity of 50 pounds, these rods are perfect for supporting shelves in a variety of applications, including homes, offices, and retail spaces.

Made from high-quality steel with a black powder coat finish, Federal Brace 32136 rods are built to last. They are easy to install, with pre-drilled holes and included mounting hardware. Simply mark the desired location of your shelf, drill pilot holes, and insert the rods into the holes. Tighten the screws until the rods are secure, and then place your shelf on top.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers