This lamp is UL listed.
ASSEMBLY INSTRUCTIONS
1. Place the wooden base(A) on the smooth surface.
2. Place the Shade(D) over the socket;
3. Insert the provided LED light bulb(C) into the socket.
DO NOT EXCEED THE SPECIFIED WATTAGE*
4. Turn on the lamp by pull chain.
This fixture has been rated up to one (1) 60-watt maximum Type A standard
incandescent (9-watt LED equivalent) *. FOR INDOOR USE ONLY.
*PLEASE NOTE:
Use of up to 9-watt LED bulb is highly recommended. If incandescent bulb
is preferred, please use up to 40-watt only.
IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE
BLADE IS WIDER THAN THE OTHER) AS AFEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS
PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY.IF IT DOES NOT FIT FULLY IN THE OUTLET,
REVERSE THE PLUG.IF IT STILL DOESNOT FIT, CONTACT A QUALIFIED ELECTRICIAN. NEVER USE WITH
AN EXTENSION CORD UNLESS THE PLUG CAN BE FULLY INSERTED.
TO CLEAN:PLEASE USE A NON-ABRASIVE DRY CLOTH LIKE MICRO-FIBER IN CLEANING.USE MILD DISH
SOAP ON DAMP NON-ABRASIVE CLOTH IF THE LAMP IS DUSTIER.DO NOT USE HOUSEHOLD CLEANERS.
LED BULB included
E26
9W
ETL LISTED
USD PORT(F) is located on the edge of the wooden base.
(5V-1A; UL LISTED)
F
/
