Page is loading ...
THS LAMPS ARE UL LISTED.
ASSEMBLY INSTRUCTIONS.
This Lamp is UL listed.
Assembly Instruction:
1. Place the wooden base(A) on the smooth surface.
2. Unscrew the top ring(D) from the socket;
3. Place the Shade(C) over the socket;
4. Secure the Shade onto the socket by screwing the top ring(D) until tight.
5. Insert the provided LED light bulb into the socket. DO NOT EXCEED THE
SPECIFIED WATTAGE.
Note: The distance between the shade and base is adjustable. Just easily set it
through bottom ring(B) according to your own taste, which enable you to enjoy
better lighting effect. The max adjustable range is 2cm. Please refer to effect(A) and
effect(B) on the left.
This fixture has been rated up to one(1) 40-watt maximum Type A standard
incandescent (9-watt LED equivalent).This lamp is for INDOOR USE ONLY.
A B
IMPORTANT SAFETY INSTRUCTIONS
THIS PORTABLE LAMP HAS A POLARIZED PLUG (ONE BLADE IS WIDER THAN THE OTHER)AS
AFEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK. THIS PLUG WILL FIT IN A POLARIZED
OUTLET ONLY ONE WAY.IF IT DOES NOT FIT FULLY IN THE OUTLET, REVERSE THE PLUG.IF IT
STILL DOESNOT FIT, CONTACT A QUALIFIED ELECTRICAN. NEVER USE WITH AN EXTENSION
CORD UNLESS THE PLUG CAN BE FULLY INSERTED.
TO CLEAN:PLEASE USE A NON-ABRASIVE DRY CLOTH LIKE MICRO-FIBER IN CLEANING.USE
MILD DISH SOAP ON DAMP NON-ABRASIVE CLOTH IF THE LAMP IS DUSTIER.DO NOT USE
HOUSEHOLD CLEANERS.
E26
9W
ETL LISTED
/
