Bartscher 601712 Operating instructions

Category
TV stands
Type
Operating instructions

This manual is also suitable for

Bartscher 601712 is a work table with a bottom shelf, made of stainless steel, capable of handling up to 25kg of weight, and is adjustable in height from 860mm to 900mm. It's easy to assemble, with plastic blockades that allow for height adjustment at intervals of 2.5cm. The bottom shelf can be placed up to 15cm above the floor. The table is sturdy and can withstand a load of 160kg on the tabletop and 120kg on the bottom shelf.

Bartscher 601712 is a work table with a bottom shelf, made of stainless steel, capable of handling up to 25kg of weight, and is adjustable in height from 860mm to 900mm. It's easy to assemble, with plastic blockades that allow for height adjustment at intervals of 2.5cm. The bottom shelf can be placed up to 15cm above the floor. The table is sturdy and can withstand a load of 160kg on the tabletop and 120kg on the bottom shelf.

- 1 -
Montageanleitung
Arbeitstisch mit Bodenbord
Seite 3 bis 5
Assembly
instruction
Work table with bottom shelf
from page 7 to 9
Notice de montage
Plan de travail avec tablette
de page 11 à page 13
Werktafel met onderschap
blz. 15 t/m 17
Instrukcja monta
ż
u
Stół roboczy z półką
strony od 19 do 21
601.710 / 601.712
V
2
/0
6
10
D/A/CH
GB/UK
F/B/CH
NL/B
PL
- 7 -
Technical data
Description Work table with bottom shelf
Article no.:
601.710 601.712
Construction: Stainless steel 18/10
Dimensions (mm):
W 1000 x D 700 x H 860-900 W 1200 x D 700 x H 860-900
Weight: 22 kg 25 kg
Carrying capacity:
Tabletop: 160 kg; bottom shelf: 120 kg
Contents
Ref.
Name
Illustration
Quantity
A Tabletop
1
B Bottom shelf
1
C Post
4
D Plastic blockade
16
GB/UK
- 8 -
Assembly Procedure:
Step 1
Place the round plastic blockades (D) inside the
slots in the posts (C) at the desired height, with the
small, narrow end of the plastic blockades (D) at
the top.
The plastic blockades (D) allow for changes of
height at intervals of 2.5 cm, and the thicker end
of a blockade (D) should be located at the
bottom. We recommend placing the bottom shelf
(B) not higher than 15 cm above the floor.
Step 2
Insert the four posts (C) into the corners of the
bottom shelf (B) and slide along until reaching the
plastic blockades (D).
Adjust and level out the table, then press on the
bottom shelf (B) to ensure it is securely fixed in
the plastic blockades (D).
- 9 -
Step 3
Fix the plastic blockades (D) at the upper end
of the four posts (C). Place the tabletop (A) on
the posts (C).
Step 4
The table is fully assembled.
To adjust the height, screw in or screw out the
threaded feet at the bottom of the posts (C).
NOTE!
After assembly remove the plastic
wrapping film.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: +49 (0) 5258 971-0
Germany fax: +49 (0) 5258 971-120
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21

Bartscher 601712 Operating instructions

Category
TV stands
Type
Operating instructions
This manual is also suitable for

Bartscher 601712 is a work table with a bottom shelf, made of stainless steel, capable of handling up to 25kg of weight, and is adjustable in height from 860mm to 900mm. It's easy to assemble, with plastic blockades that allow for height adjustment at intervals of 2.5cm. The bottom shelf can be placed up to 15cm above the floor. The table is sturdy and can withstand a load of 160kg on the tabletop and 120kg on the bottom shelf.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI