ELEKT RO-G RID D LEPLA TTE
ELECTRIC GRIDDLE PLATE
PLAQUE A GRILL ELECTRIQUE
GRIGLIA ELETTRICA
PARRILLA ELÉCTRICA
CHAPA DE GRILL ELÉTRICA
ELEKTRISCHE GRILLPLAAT
PŁYTA GRILLOWA ELEKTRYCZNA
296507 / FTE91MA0
296510 / FTE92MA0
296511 / FTE92MCO
Rev.-Nr.: 01-2017
INSTALLAT I ONS-, BEDIENUN GS-
UND W ARTUNGSA NW EISU NGE N
INSTALLAT I ON, OPERATING
AND MAINTENANCE NSTR U CTIONS
MA NUEL D' INST ALLAT I ON,
D'UTILISAT ION ET D'E NTRETIEN
MA NUALE DI INSTALLAZIONE ,
USO E MANUTENZIONE
MA NUAL DE INSTAL ACIÓ N,
USO Y MANT ENIMIENTO
MA NUAL DE INSTAL AÇÃ O,
UT ILIZA ÇÃO E MANUT ENÇÃO
HANDL EIDI NG VOOR INSTALLATIE,
GE BRUI K EN ONDERH OUD
W SKAZÓW KI DOT YCZĄ CE INSTALA CJI,
UŻYTKOW ANIA I KONSERW ACJI
DE
GB
FR
IT
ES
PT
NL
PL
TECHNISCHE ÄNDERUNGEN VORBEHALTEN!
TECHNICAL CHANGES RESERVED!
SOUS RÉSERVE DE MODIFICATIONS TECHNIQUES !
CI RISERVIAMO LA POSSIBILITÀ DI INTRODURRE MODIFICHE TECNICHE!
¡SE RESERVA EL DERECHO A INTRODUCIR MODIFICACIONES TÉCNICAS!
SUJEITO A ALTERAÇÕES TÉCNICAS!
TECHNISCHE WIJZIGINGEN VOORBEHOUDEN!
WPROWADZANIE ZMIAN TECHNICZNYCH ZASTRZEŻONE!
PL
IT
DE
PT
NL
ES
FR
GB
1
ENGLISH
GB
1. TABLE OF CONTENTS
1. TABLE OF CONTENTS ..................................................................................................................... 1
2. INDEX ................................................................................................................................................. 2
3. SAFETY .............................................................................................................................................. 3
4. GENERAL INFORMATION AND WARNINGS ................................................................................... 4
4.1. General guidelines ................................................................................................................... 4
4.2. Description of the device .......................................................................................................... 4
4.3. Index plate ................................................................................................................................ 5
4.4. Exchange of components (service technician) ........................................................................ 5
4.5. Elements and accessories ....................................................................................................... 5
4.6. Protection devices .................................................................................................................... 5
5. USE AND OPERATION ..................................................................................................................... 6
5.1. Description of the controls. ....................................................................................................... 6
5.2. Device switching on and off ..................................................................................................... 6
5.3. Installation of anti-splash cover ................................................................................................ 7
5.4. Guidelines on how to use the device ....................................................................................... 7
6. CLEANING AND MAINTENANCE ..................................................................................................... 8
6.1. Guidelines on cleaning and maintenance ................................................................................ 8
6.2. Correct maintenance ................................................................................................................ 8
6.3. Cleaning of the grill plate .......................................................................................................... 8
7. PROBLEMS DURING OPERATION .................................................................................................. 9
8. INSTALLATION .................................................................................................................................. 9
8.1. Packaging and unpacking ........................................................................................................ 9
8.2. Installation (service technician) .............................................................................................. 10
8.3. Connection to the mains (service technician) ........................................................................ 10
8.4. Installation of the appliance in a line ...................................................................................... 11
8.5. Check-up (service technician) ................................................................................................ 12
9. SETTINGS ........................................................................................................................................ 12
10. APPLIANCE DISPOSAL .................................................................................................................. 12
ATTACHMENTS ....................................................................................................................................... I
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: +49 (0) 5258 971-0
Germany fax: +49 (0) 5258 971-120
2
ENGLISH
GB
2. INDEX
A
APPLIANCE DISPOSAL 12
C
Check-up 12
Cleaning of the grill plate 8
Connection to the mains 10
Correct maintenance 8
D
Description of the controls 6
Description of the device 4
Device switching on and off 6
E
Elements and accessories 5
Exchange of components 5
G
General guidelines 4
Guidelines on cleaning 8
Guidelines on how to use the device 7
Guidelines on regular use of the device 7
I
Index plate 5
Installation 10
Installation of anti-splash cover 7
Installation of the appliance in a line 11
L
Longer interval in the use of the device 7
M
Maintenance 8
P
Packaging 9
PROBLEMS DURING OPERATION 9
Protection devices 5
S
SAFETY 3
U
Unpacking 9
3
ENGLISH
GB
3. SAFETY
Read carefully the guidelines and
instructions in the instruction manual
before you use the device.
The instruction manual contains general
information on how to safely use and maintain the
device. Retain the manual for future reference.
Electric installation conforms to CE EN
60335-1 and 60335-2-38 regulation.
To prevent any hazard, the
damaged mains power cable may be
replaced by the manufacturer or
service personnel only.
The manufacturer took extra care when designing
and manufacturing to prevent any safety or health
hazard to the personnel operating the device.
Please read carefully the guidelines in the
instruction manual and instructions placed directly
onto the device. Above all, observe all the safety
instructions.
Do not intervene in or remove the protective
device installed in the device. Non-compliance
may lead to severe safety and health hazard
against people. We recommend to perform a few
tests to know the layout and main functions of the
control panel, particularly those to switch the
device on and off.
The device is intended only for the use it has been
designed for and any other use is considered as
the use not in compliance with the intended use.
The manufacturer is not liable for material
damage or damage to person caused by
misapplication or incorrect application of the
device.
Any maintenance work that requires special
technical license or special skills may be
performed by qualified personnel only.
To provide hygiene and protect foods from dirt, all
the elements that have direct or indirect contact
with the foods and all border areas must be
thoroughly cleaned. Use only the cleaning agents
intended for use in contact with food and avoid
using flammable agents or harmful to health.
After each use of the device make sure that all the
heating elements and control elements have been
switched off and the cable unplugged.
In case of prolonged interval in using the device
disconnect all power supply cables and thoroughly
clean the inside and outside elements of the
device.
In direct connection to the mains
the safety switch should be supplied
where wire joints dilation is large
enough to secure disconnection in
category III overvoltage, which is in
accordance with the installation rules.
The device requires some safety
measures during installation, positioning,
fixing, and connecting to the power supply
(section 8 “INSTALLATION”).
Do not clean the device with direct
stream of water.
4
ENGLISH
GB
4. GENERAL INFORMATION AND WARNINGS
4.1. General guidelines
The manual has been edited by the manufacturer
to provide the authorized personnel with the
information necessary to work with the device.
We recommend the intended readers to read the
manual carefully and comply with the information.
By reading the information contained in the
manual, hazards against people health and safety
may be prevented.
Retain the manual in an easily available place
throughout the time of use of the device to have
access and refer to the required information at
any time.
Special symbols, described below, have been
used to stress important information or draw
attention to essential data:
Warning
Indicate important safety
instructions. You should acquire the
proper conduct to prevent hazard
against people health and safety or not
to cause any damage.
Caution
Indicate essentials technical data that
you cannot ignore.
4.2. Description of the device
This device, called electric griddle plate, has been
designed and manufactured for professional
gastronomy for preparing food directly on the grill
plate. Depending on requirements there are
versions with one or two grill plates available.
1) Grill plate
2) Lower part
3) Height adjustable feet
4) Temperature controller: adjusts
temperature of grill plate
5) Smoke exhaust: removes heat produced
by electric heating elements outside.
6) Indicator lights.
1
2
3
5
4
ID 01
6
5
ENGLISH
GB
4.3. Index plate
The index plate indicated in the drawing is
mounted directly onto the device. There are all
guidelines and information on the plate required
for safe use.
1) EAN-No.
2) Code-No. / Model-No.
3) Connection: power / supply frequence /
supply voltage
4) Date of production
5) Serial-No.
6) WEEE symbol
7) CE-marking
4.4. Exchange of components (service technician)
Before exchange of the
component switch on all the
existing protection devices.
In particular, switch off the electric
supply with the electrical potential switch.
If necessary, exchange the used components
to the original spare parts.
We are not liable for personal injury or
damage to the components that arise due to
application of other spare parts than original
or intervention into the device without the
manufacturer’s consent that may have altered
the safety requirements.
4.5. Elements and accessories
The device is delivered with the following
equipment:
A. Fat drip tray.
On demand we can provide the following
accessories:
A. Anti-splash cover
B. Closing plug
4.6. Protection devices
The device is equipped with the following
protection systems:
1. Safety thermostat: it disconnects the electric
power supply in the case of over-heating.
When the safety thermostat is on it is indicated by
the red control light.
The drawing safety the protective thermostats
layout.
Check every day that the
protection devices are mounted
correctly and operational.
ID 02
1
1
2
3
4
5
6
7
6
ENGLISH
GB
5. USE AND OPERATION
5.1. Description of the controls.
The elements controlling the essential functions
are located on the control panel of the device.
A) Temperature controller: to switch the
heating coils on and off.
B) Green indicator light: indicates activated
power supply
C) White indicator light: indicates device
heating
D) Red indicator light: indicates activation of
safety thermostats.
5.2. Device switching on and off
SWITCHING ON:
before the first use remove the protective grease
layer and any contaminants from the grill plate.
Heat the device to 200°C.
A) Start the automatic switch-off to turn on
the electrical connection.
B) Set the temperature controller (A) in
desired position. The green indicator light
(B) comes on. The white indicator light of
heating (C) comes on. When the grill plate
reaches the required temperature, the
white indicator light (C) goes off.
SWITCHING OFF
A) Turn the temperature controller to position
0 to switch off the heating plate. The
green control light (B) goes off.
B) Start the automatic switch-off to turn off
the electrical connection.
Deactivation
symbol
A
A
Operational
control lights
A
B
C
D
Operational
temperature
A
B
C
D
7
ENGLISH
GB
CHROME-PLATED GRILL PLATE
The device with chrome-plated
grill plate should be heated during approx.
30 minutes in temperature of 200°C.
5.3. Installation of anti-splash cover
During the installation of anti-splash cover follow
the instructions below:
1. Put the back part on the heating plate (A).
2. Catch on both side parts (B) and position
them.
The anti-splash cover should be
washed in the dishwasher.
5.4. Guidelines on how to use the device
Longer interval in the use of the device
When you plan not to use the device for the
prolonged time, follow the instructions below:
1. Turn on the automatic switch-off to disconnect
from the mains;
2. Thoroughly clean the device and surrounding
areas;
3. Apply the vaseline oil on the stainless steel
surfaces;
4. Perform all maintenance works.
Guidelines on regular use of the device
To ensure correct use of the device follow the
guidelines below:
Use only accessories provided by the
manufacturer;
Do not use the device for heating pots or
frying pans, as it may damage the grill plate.
Do not use the device for frying
in oil or fat on the grill plate.
Do not prepare deep-frozen food on
the grill plate, as it may become damaged.
While removing food residuals do not
scratch the grill plate; particular caution is
required in case of chrome-plated grill plate.
A
B
8
ENGLISH
GB
6. CLEANING AND MAINTENANCE
6.1. Guidelines on cleaning and maintenance
Before you start maintenance
works, turn on all the mounted
protective devices.
In particular, disconnect the electric
power supply by means of the
automatic switch-off.
6.2. Correct maintenance
Proper maintenance includes daily cleaning of all
components which have contact with food
products, and regular maintenance of drain pipes.
Careful maintenance ensures the best
performance, longer life of the device and proper
operation of the protective devices.
Never direct the water stream or high pressure jet
towards the device.
To clean the stainless steel, do not use iron wool
or iron brush as they may leave iron particles on
the surface that form rust in result of oxidation.
In the case of prolonged intervals in the use of the
device, apply the vaseline oil onto all the stainless
steel surfaces.
Do not use any clearing agents
that contain substances hazardous or
harmful to health (solvents, petrol.
etc.).
At the end of the working day clean:
grill plate
device.
Regularly instruct the specialist personnel to
perform the following maintenance works:
check the electric installation;
check the safety thermostats.
6.3. Cleaning of the grill plate
Follow the instructions below.
1. Remove food residuals from the grill plate
with use of spatula (particular caution is
required in case of chrome-plated grill
plate).
2. Apply the fat dissolving agent on the grill plate
and leave for few minutes.
3. Close the drain hole with appropriate plug.
4. Pour hot water on the grill plate and leave for
few minutes.
5. Remove the fat drip tray.
6. Put the receiving container under the outlet
hole.
7. Remove the plug and wait for water to drain.
8. Thoroughly clean and dry the grill plate.
We recommend to wash the
accessories in the dishwasher.
Thoroughly and dry the grill plate to
avoid rust and apply the protective layer of
vaseline oil.
9
ENGLISH
GB
7. PROBLEMS DURING OPERATION
The information below is provided to recognize
and repair any failures that may occur when
operating the device.
Some of the failures can be repaired by the user,
others require thorough specialist knowledge.
Such problems may be solved exclusively by the
qualified personnel.
Problem Cause Solution
The heating coils do not heat
up.
The electrical connection is not
correct.
Check the electrical connection.
Safety thermostats are on.
Reset the device (see special
section).
Damaged temperature
controller.
Replace switch.
Contact the service company.
8. INSTALLATION
8.1. Packaging and unpacking
During unloading and when installing the device
follow the information from the manufacturer
placed directly on the packaging and in this
manual.
To lift and transport the product plan to use a fork
lift or stacker, and pay attention to even weight
distribution to avoid a risk of tilting of the
packaging (avoid excessive incline!).
When using the lifting equipment
pay attention to the mains cable and
feet position.
The packaging consists of the carton packaging
and wooden pallet. There are symbols printed on
the carton packaging that according to the
international agreements inform about the
regulations to follow when loading and unloading,
transporting and storing the device.
When collecting the goods check if the packaging
is complete and has not been damaged during
transport.
Any damage should be immediately reported to
the shipping company.
Unpack the device as soon as possible to check if
the device is not damaged.
Do not use a sharp object to cut the carton box. It
may damage the stainless steel inside the box.
Remove the carton packaging from bottom to top.
When unpacked check if the device is according
to the order.
In case of any difference inform the sales agent
immediately.
Do not store the packaging
materials (nylon bags, polystyrene
foam, clips ...) in the reach of children!
Remove the protective PVC layer from the out
and inner surfaces. If possible, do not use any
metal tools.
THIS
SIDE UP
CAUTION
GLASS
KEEP DRY
10
ENGLISH
GB
8.2. Installation (service technician)
All the stages of the installation must be carefully
planned.
The location should be equipped with all supply
connections and production waste outlet. The
location should also be properly lit and comply
with all hygiene and sanitary requirements
according to the binding regulations.
The device should be installed with the minimum
10 cm clearance from the wall.
Locate the device in the horizontal position by
adjusting the individual feet.
The device FTE91 must be fixed to the foot flange
at the bottom.
When the device is to be installed
near the walls, partitions, kitchen
cabinets, decorative elements, etc., they
must be made from non-flammable
materials or covered with suitable non-
flammable materials.
To ensure the correct operation
of the device, the device must be
installed and operated in the
thoroughly ventilated room only.
8.3. Connection to the mains (service technician)
The device may be connected to the power supply
only by the authorized and qualified personnel,
when the valid regulations are followed and when
appropriate material is used in accordance to the
regulations.
Depending on the model the devices are designed
for connection to the following networks:
380-415 V 3N~ 50-60 Hz
During the installation follow the data on the rating
plate.
Before connecting the device to
the mains, check whether the device is
connected to the appropriate circuit
breaker in all poles with minimum air
gap of 3 mm.
To correctly connect the device, follow the
guidelines below.
Remove the cover from the terminal strip (A).
A
10 mm
11
ENGLISH
GB
Connect the switch-off to the terminal strip (B)
of the device, as shown in the drawing and
block diagram (see the attachments). Use
cable type H07RN-F or better, min. heat
resistance of 80 °C.
Firmly press the end of the cable (C).
Replace the terminal strip cover.
The device is equipped with the equipotential
clamp (M). The terminal is marked with
appropriate sticker: .
8.4. Installation of the appliance in a line
To fix the appliance in a line (neighboring) follow
the steps:
1. Dismantle the control panel, and remove the
cast iron frame from the chimney if necessary.
2. Apply the sealing tape (A) onto the joining
sides.
3. Place the appliances next to each other and in
a horizontal position (by adjusting the feet).
4. Connect the appliances with the joining
elements.
M
A
A
B
C
C
B
C
12
ENGLISH
GB
8.5. Check-up (service technician)
Before starting the appliance the installation
check-up should be run to evaluate the working
conditions of every single component and
recognize any errors.
It is recommended to run the following check-ups:
1. Check that the energy supply voltage is the
same as of the appliance voltage.
2. Turn on the automatic switch-off to check the
electrical connections.
Check that the protection devices work correctly.
9. SETTINGS
There are no special default settings of the
device.
The only settings are those set up by the user
while using the device.
10. APPLIANCE DISPOSAL
The appliance is marked in conformity
with the European Directive 2002/96/EG
WASTE ELECTRICAL AND ELECTRONIC
EQUIPMENT (WEEE).
By disposing the appliance in
accordance with the regulations the
user contributes towards prevention of
adverse effects on environment and
health.
The symbol on the product or
attached manual indicates that the product cannot
be considered as ordinary household waste and
should be transferred to a special collection point
for electrical and electronic appliances for
recycling.
Local waste management regulations should be
observed.
Further information on procedure, reusing and
recycling of the product is available in local
offices, waste management unit or with the
product sales agent.
Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten phone: +49 (0) 5258 971-0
Germany fax: +49 (0) 5258 971-120
ANLAGEN
ATTACHMENTS
ANNEXES
ALLEGATI
ANEXOS
ANEXOS
BIJLAGEN
ZAŁĄCZNIKI
Modell
Leistung Daten zu Elektrik Gewicht
Model
Power Electrical connection Weight
Modèle
Puissance Raccordement électrique Poids
Modello
Potenza Dati relativi all’impianto elettrico Peso
Modelo
Potencia Datos de instalación eléctrica Peso
Modelo
Potência Dados para a instalação elétrica Peso
Model
Vermogen Gegevens van de elektrische installatie Gewicht
Model
Moc Dane dot. instalacji elektrycznej Ciężar
kW V Hz Supply cable
kg
FTE91MA0 7,5
380-415V 3N~ 50-60 5x1,5 mm² 66,4
FTE92MA0
15 380-415V 3N~ 50-60 5x2,5 mm² 123,0
FTE92MCO
15 380-415V 3N~ 50-60 5x2,5 mm² 121,6
760
400
95
905
950
50
356.521.75 21.75
79 240 7985
150
510
715
905
950
295105
255
400
75
510
150
900
750
60
180
19580
Elektroanschluss
7,5 kW
Electric Connection
Branchement Electrique
Allacciamento Elettrico
Conexiòn elètrica
Ligação Elétrica
Elektrische aansluiting
Przyłącze elektryczne
ANSCHLUSSSCHEMA
- CONNECTION CARD - FICHE DES RACCORDEMENTS -
SCHEDA ALLACCIAMENTI - FICHA DE ENLACES - ESQUEMA DAS CONEXÕES -
PLAN AANSLUITINGEN - SCHEMAT PODŁĄCZENIA
FTE91Mx0
905
950
85715
905
950
75
510
150
900
750
60
180
200 400
79 640
150
510
200 400
255
800
760
800
95
50
756.521.75
200
79
200
19580
Elektroanschluss
15 kW
Electric Connection
Branchement Electrique
Allacciamento Elettrico
Conexiòn elètrica
Ligação Elétrica
Elektrische aansluiting
Przyłącze elektryczne
ANSCHLUSSSCHEMA
- CONNECTION CARD - FICHE DES RACCORDEMENTS -
SCHEDA ALLACCIAMENTI - FICHA DE ENLACES - ESQUEMA DAS CONEXÕES -
PLAN AANSLUITINGEN - SCHEMAT PODŁĄCZENIA
FTE92Mx0
380-415V 3N~ 50/60Hz
FTE71 : 5G x 1 mmq In=7.8 A
FTE72 : 5G x 1.5 mmq In=15.7 A
FTE91 : 5G x 1.5 mmq In=10.9 A
FTE92 : 5G x 2.5 mmq In=21.7 A
M2 M2 M2
M1
P4P3P2P1
4321
12 22 32
11 21 31
24
R3R2R1
B1
S1
LB LR
12 32
11 21 31
T1
22
LV
M2 M2 M2
M1
1
12 22 32
11 21 31
24
R3R2R1
B1
S1
LB LR
12 32
11 21 31
T1
22
LV
L1 L2 L3 N N
M
PE
P4P3P2P1
432
SCHALTPLAN - ELECTRIC DIAGRAM – SCHÉMA ÈLECTRIQUE - SCHEMA
ELETTRICO - ESQUEMA ELÉCTRICO - ELEKTRISCH SCHEMA - SCHEMAT IDEOWY
111 60826
REVISION 02
NOTE
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
Bartscher 296510 Operating instructions
- Category
- Barbecues & grills
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- italiano: Bartscher 296510 Istruzioni per l'uso
Related papers
-
Bartscher 296510 Operating instructions
-
Bartscher A150673 Operating instructions
-
-
-
Bartscher A150671 User manual
-
-
Bartscher 296318 Operating instructions
-
Bartscher 296311 Operating instructions
-
Bartscher A150685 Operating instructions
-
Bartscher A370039 Operating instructions
Other documents
-
Whirlpool ADN 260 User guide
-
Lofra MG86GV/C Owner's manual
-
Candy CVE660MW/E User manual
-
-
Whirlpool ADN 240 User guide
-
-
Whirlpool ESZ 4466/01 IN User guide
-
Smeg SCB66MPX5 User manual
-
-
Arris GRILLVAPOR 550EL Operating instructions