Dedicated Micros KBS3 User guide

Dedicated Micros
Brand
Dedicated Micros
Model
KBS3
Category
Security camera accessories
Type
User guide

This manual is also suitable for

Page is loading ...
Page 1
KBS3 Remote Keyboard
Set-up and operation guide
Connecting the Remote Keyboard
The remote keyboard is supplied with a 2m length of 485-bus cable; this is used to connect the
keyboard to either of the 485-bus ports on the Dedicated Micros DVR.
The remote keyboard can also be connected over longer distances, up to 1500m (4900ft), using
2 junction boxes (DM/CJ01), a 12v 1A PSU, and the required length of twisted pair cable, for
example CAT5.
The remote keyboard is compatible with the following Dedicated Micros Digital Recorders:
• Digital Sprite 2 range.
• BX2 range.
• D4 range.
A single remote keyboard can be connected to multiple (up to 16) DS2 or BX2 units. Multiple
remote keyboards can be connected to a single DS2 or BX2 unit.
The D4 unit supports a single remote keyboard and a keyboard can only be connected to a
single D4.
Operating DM’s DVR range from the remote keyboard
The remote keyboard has the same functionality as the front panel keyboard, but gives the
following additional benefits:
• Control of telemetry connected to the Digital Sprite.
DS2 range and BX2 range – Coaxial and Serial telemetry.
D4 range – serial telemetry only.
• Control of multiple DS2 or BX2 units from a single keyboard.**
• Panic alarm.
** Only a single keyboard can be connected to a D4.
Description of keys:
Key Function
Toggle freeze frame on and off.
Selects Live mode.
Selects operation of the spot monitor.
Selects a full screen display.
ENGLISH
Page 2
Toggle sequence on and off, press and hold to edit the sequence (Red
button).
Select picture in picture display, press and hold to edit the display
(Green button).
Select quad display, press and hold to edit the display (Yellow button).
Select multiscreen display; tap to switch displays to 9, 8+2, 12+1, and 16
way views. Press and hold to edit the display (Blue button).
Toggle the panic alarm on and off.
Press 'UNIT SELECT' followed by a camera key to log onto another unit.
Press to enter telemetry commands with certain receivers.
Tap to enter the User menu, press and hold to enter the Installer menu.
Tap to enter the Event Log, press and hold to filter the event log.
Tap to go to a specified time and date.
Press and hold to enter the copy menu (see 'Operating Digital Sprite 2'
card for details of copying to CD).
Tap to enter a value. For example, Preset 01 could be entered as preset
1 [ENTER].

Use the VCR style buttons to playback images from the disk.
1..16
Camera keys press to select a camera to display.
Tap 'PRESET' and enter the preset number you wish to recall (camera
10 is number 0), i.e. preset 20 is camera 2 and camera 10. Press and
hold to save a preset.
Zoom in (or twist the joystick clockwise).
Zoom out (or twist the joystick anti-clockwise).
Toggle the Patrol mode on and off.
Press and hold to focus near.
Press and hold to focus far.
Toggle the auto-pan function on and off.
Press and hold to close the iris.
Press and hold to open the iris.
Toggle lights on and off.
Press to wash (momentary).
Toggle wipe on and off.
Note: The above features are only applicable if the telemetry receiver or dome supports them.
LCD Display
The remote keyboard has an LCD display which displays information such as; the unit name,
date, time, and unit number.
Changing the contrast of the LCD display
It is possible to change the contrast of the LCD display, to change the contrast:
1. Tap the UNIT SELECT key.
2. Tap the
×
or
Ø
keys to increase or decrease the contrast from 1 to 15 (default setting is 8).
3. Tap the UNIT SELECT key again to go back to normal operation.
Recalibrating the joystick
If the telemetry camera drifts when it is not being used, the joystick may have to be recalibrated.
To do this:
1. Un-plug the keyboard from the system.
2. Press and hold the ∗ (star) button while re-connecting the keyboard to the system.
3. The keyboard will beep.
4. Continue to hold ∗ until the keyboard beeps again and the display shows Calibrate Joystick.
5. Rotate the joystick through it’s complete range of motion in all directions until the camera key
LED’s stop flashing.
6. Twist the joystick zoom fully left and right.
7. The joystick is now calibrated; press the ∗ (star) button again to return to normal operation.
Changing the Keyboard number
It may be necessary to change the keyboard number if you have multiple keyboards on a site.
To change the keyboard number:
1. Connect the keyboard to the 485-bus port whilst holding down the UNIT SELECT key.
2. Press a camera key to set the keyboard to that keyboard number.
3. The keyboard number is now configured.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Dedicated Micros Ltd. Dedicated Micros Europe
11 Oak Street, Swinton, Neckarstraße 15,
Manchester. M27 4FL 41836 Hückelhoven, Germany
Tel: +44 (0) 161 727 3200 Tel: +49 2433 5258-0
Fax: +44 (0) 161 727 3300 Fax: +49 2433 5258-10
Dedicated Micros France Dedicated Micros Slovenia
9-13 rue du Moulinet Delavska cesta 26
75013 Paris, France 4208 Sencur, Slovenia
Tel : +33 (0) 1 45 81 99 99 Tel : +386 4279 1890
Fax : +33 (0) 1 45 81 99 89 Fax : +386 4279 1891
Dedicated Micros Belgium Dedicated Micros USA.
Joseph Chantraineplantsoen 1 14434 Albemarle Point Place, Suite 100,
3070 Kortenberg, Belgium Chantilly, Virginia 20151 USA
Tel : +32 2751 3480 Freephone: 800 864 7539
Tel: +1 703 904 7738
Fax : +32 2751 3481 Fax: +1 703 904 7743
Dedicated Micros USA. Dedicated Micros, Australia PTY.
23456 Hawthorne Blvd. Suite 100, 5/3 Packard Avenue, Castle Hill,
Torrance, CA 90505, USA NSW 2154, Australia
Tel: +1 310 791-8666 Tel: +612 9634 4211
Fax: +1 310 791-9877 Fax: +612 9634 4811
Dedicated Micros, Asia PTY Dedicated Micros Middle East
16 New Industrial Road, Building 12, Suite 302,
#03-03 Hudson Techno Centre, P.O. Box 500291, Dubai Internet City,
Singapore 536204 Dubai, United Arab Emirates
Tel: +65 62858982 Tel: +971 (4) 390 1015
Fax: +65 62858646 Fax: +971 (4) 390 8655
Dedicated Micros (Malta) Ltd.
UB2 San Gwann Industrial Estate,
San Gwann SGN 09 Malta
Tel: +356 21483 673
Fax: +356 21449 170
MI-U-KBS3/M2-1
© Dedicated Micros Oct 2005
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14

Dedicated Micros KBS3 User guide

Dedicated Micros
Brand
Dedicated Micros
Model
KBS3
Category
Security camera accessories
Type
User guide
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents