Bartscher 601710, 601712 Operating instructions

Hello! I am an AI chatbot trained to assist you with the Bartscher 601710 Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
What are the dimensions of the work table?

What is the weight of the work table?

What is the carrying capacity of the work table?

What tools are required for assembly?

How many people are required for assembly?

What is the recommended height for the bottom shelf?

How can I adjust the height of the table?

How do I remove the plastic wrapping film?

- 1 -

Montageanleitung

Arbeitstisch mit Bodenbord

Seite 3 bis 5

Assembly

instruction

Work table with bottom shelf

from page 7 to 9

Notice de montage

Plan de travail avec tablette

de page 11 à page 13

Montagehandleiding

Werktafel met onderschap

blz. 15 t/m 17

Instrukcja monta

Stół roboczy z półką

strony od 19 do 21

601.710 / 601.712

D/A/CH

GB/UK

F/B/CH

NL/B

Page is loading ...

- 7 -

Technical data

Description Work table with bottom shelf

Article no.:

601.710 601.712

Construction: Stainless steel 18/10

Dimensions (mm):

W 1000 x D 700 x H 860-900 W 1200 x D 700 x H 860-900

Weight: 22 kg 25 kg

Carrying capacity:

Tabletop: 160 kg; bottom shelf: 120 kg

Contents

Ref.

Name

Illustration

Quantity

A Tabletop

B Bottom shelf

C Post

D Plastic blockade

GB/UK

- 8 -

Assembly Procedure:

Step 1

Place the round plastic blockades (D) inside the

slots in the posts (C) at the desired height, with the

small, narrow end of the plastic blockades (D) at

the top.

The plastic blockades (D) allow for changes of

height at intervals of 2.5 cm, and the thicker end

of a blockade (D) should be located at the

bottom. We recommend placing the bottom shelf

(B) not higher than 15 cm above the floor.

Step 2

Insert the four posts (C) into the corners of the

bottom shelf (B) and slide along until reaching the

plastic blockades (D).

Adjust and level out the table, then press on the

bottom shelf (B) to ensure it is securely fixed in

the plastic blockades (D).

- 9 -

Step 3

Fix the plastic blockades (D) at the upper end

of the four posts (C). Place the tabletop (A) on

the posts (C).

Step 4

The table is fully assembled.

To adjust the height, screw in or screw out the

threaded feet at the bottom of the posts (C).

NOTE!

After assembly remove the plastic

wrapping film.

Bartscher GmbH

Franz-Kleine-Str. 28

D-33154 Salzkotten phone: +49 (0) 5258 971-0

Germany fax: +49 (0) 5258 971-120

Page is loading ...

Bartscher 601710, 601712 Operating instructions

Related papers

Other documents