Page is loading ...
Videoline
Digital B/W CCD Camera
MC-600 Series
MC-600C/600E (12 VDC)
MC-601C/601E (24 VAC & 12 VDC )
MC-602C/602E (90~250 VAC)
INSTALLATION INSTRUCTIONS
To achieve the best performance of this CCD camera, please carefully read
all instructions before installing. Incorrect operation or setting may result in
inferior picture quality.
2
CONTENTS
1 . General.....................................................................................................3
2. Name of parts ..........................................................................................3
3. Auto iris lens connection........................................................................4
3.1 Video servo auto iris lens (with EE amp) .............................................4
3.2 DC servo auto iris lens (without EE amp) ............................................5
4. AE (Automatic Exposure) Setting...........................................................5
4.1 AES Mode .............................................................................................5
4.2 Flickerless Mode ...................................................................................5
4.3 Auto Iris Mode .......................................................................................6
4.4 Auto Iris with Variable Shutter Speed....................................................6
5. ME (Manual Exposure) Setting ...............................................................6
6. BLC (Back Light Compensation)............................................................7
6.1 Central Window Weighted Average BLC ..............................................8
6.2 Histogram Calculated BLC....................................................................8
7. Technical specifications .........................................................................8
3
1. General
Thank you very much for choosing Videoline CCD camera for your CCTV
surveillance system. MC-600 series is a high-resolution (600 TV lines) B/W
digital Camera. This camera employs a state-of-the-art 1/3” Super HAD CCD
with total 473/412K pixels and an advanced Digital Signal Processor (DSP) to
process superior digital video signal. A sophisticated microprocessor helps
to provide excellent quality, crisp picture and full control of various intelligent
features.
OUTDOOR USE WARNING
To prevent electric shock, do not expose this device directly to rain, snow or
high moisture environment. A weatherproof housing should be applied.
2. Name of parts
γ
=.45
90~250VAC
DC
LEVEL DC VIDEO
1/4"-20 UNC
MC-600C/600E
MC-601C/601E
MC-602C/602E
C.
J.
D.
F.
G.
I.
F.
H.
K.
E.
B.
A
.
Digital
PL
MONI. OUT
VIDEO OUT
O I
ME
FL
BLCOFF
A-IRIS
AI SHUT
Pk
SUPER
γ
=1
AE
FLOFF
BLC
C-IRIS
NORM
A
v
AGC
SW1
DC
12V
NC
PL
MONI. OUT
VIDEO OUT
O I
ME
FL
BLCOFF
A-IRIS
AI SHUT
Pk
SUPER
γ
=1
γ
=.4
5
A
E
FLOF
F
BLC
C-IRI
S
NORM
A
v
AGC
SW1
DC
12V
NC
PHASE
PL
MONI. OUT
VIDEO OUT
O I
ME
FL
BLCOFF
A-IRIS
AI SHUT
Pk
SUPER
γ
=1
γ
=.45
AE
FLOFF
BLC
C-IRIS
NORM
A
v
AGC
SW1
PHASE
AC
24V
4
C mount lens adapter
If a CS mount lens is used, remove the adapter ring.
A. Flange back adjusting ring
If back focus adjustment is required, loosen the flange back locking
screw and then back focus can be adjusted by rotating the ring.
B. Mounting bracket screw hole (1/4” – 20 UNC)
C. Auto iris lens connector (Mini Jack)
E. Flange focal locking screw
F. Video output terminal (BNC)
G. Power supply indicator
H. Function control DIP switch
No. Left – 0 Function Right -1 Under Manual Exposure mode
1 AE Auto-Manual Exposure ME AE-ME SW is set at ME
2 FL OFF AES Low mode OFF-ON FL
3 BLC BL compensation ON-OFF BLC OFF
4 C-IRIS Fixed iris or Auto iris lens A-IRIS
V
arious manual shutter speeds
can be set via combination of
these 3 switches
5 NORM Auto iris+shutter speed AI SHUT
6 Av AE Convergence (Av-Pk) Pk
7 AGC AGC Max – Super AGC SUPER
V
arious gains can be set via
combination of these 2 switches.
8 γ=.45 Gamma ON-OFF γ=1
I. Power input terminal
J. Video/DC drive auto iris lens selector
K. DC level adjuster
3. Auto iris lens connection
3.1 Video servo auto iris lens (with EE amp)
Set the lens selector to “Video” position.
Connector cable leads
1. Red-----Power
2. NC
3. White --Video
4. Black --Shielded
3.2 DC servo auto iris lens (without EE amp)
1
24
3
DC VIDEO
AE
FL-OFF
BLC
C-IRIS
NORM
Av
AGC
γ=.45
ME
FL
BLC-OFF
A-IRIS
AI SHUT
Pk
SUPER
γ=1
O I
5
1
24
3
DC VIDEO Set the lens selector to “DC” position.
Connector cable leads
1. Damping coil (-)
2. Damping coil (+)
3. Driving coil (+)
4. Driving coil (-)
To ensure correct lead connection, please refer to the instruction of lens.
4. AE (Automatic Exposure) Setting
AE-ME: 0 (at AE position)
Table 1. DIP switch (SW1) setting for various AE modes
DIP switch No. 1 2 3 4
AE modes Switch position
AE CCD iris mode O O O O
AE electronics iris, BLC off O O I O
AE no-flicker mode O I O O
AE mechanical iris mode O O O I
AE mechanical iris, BLC off O O I I
AE mechanical iris, no-flicker O I O I
4.1 AES Mode
AES (Automatic Exposure System) means the exposure of
camera is controlled by electronic iris and automatic gain
control (AGC). Under the AES mode, AGC is normally set at
minimum level (0 dB) and camera exposure is virtually
controlled by electronic iris. If the exposure is still insufficient
even the shutter speed has changed to maximum (1/50 or 1/60),
then AGC will operate to optimize the exposure. On the
contrary, AGC will reduce the gain first if camera is over
exposure. However, if the exposure is still excessive even the
AGC is reduced to minimum, then electronic iris will shorten the
exposure time to optimize the exposure.
4.2 AES Low Mode
AES Low mode (Flickerless) reduces the blurring picture under
the low light. Under this mode, the shutter speed is set at 1/100
sec. to 1/100,000 sec. for PAL and 1/120 sec. to 1/100,000 for
NTSC respectively. Under this mode, the automatic exposure is
AE
FL-OFF
BLC
C-IRIS
NORM
Av
AGC
γ=.45
ME
FL
BLC-OFF
A-IRIS
AI SHUT
Pk
SUPER
γ=1
O I
AE
FL-OFF
BLC
C-IRIS
NORM
Av
AGC
γ=.45
ME
FL
BLC-OFF
A-IRIS
AI SHUT
Pk
SUPER
γ=1
O I
2
controlled by AGC only.
4.3 Auto Iris Mode
If an auto iris lens is used, this mode should be set. Under this
mode, the shutter speed is fixed at 1/50 sec. (PAL) or 1/60 sec.
(NTSC). The camera exposure is controlled by AGC and auto
iris lens. The built-in microprocessor will measure the amount of
light received on the CCD and then output the control signal to
iris server built-in the auto iris lens.
4.4 Auto Iris with Variable Shutter Speed
This mode is similar with the Auto Iris Mode, only the shutter
speed is variable. With this function, the camera is able to catch
a fast moving object by higher shutter speed, yet still produce a
clear picture without sacrificing the depth of field. Table 2
shows how to set various shutter speeds.
Table 2. DIP switch (SW1) setting for various shutter speeds
DIP switch No. 1 2 3 4
Shutter Speed Switch position
1/50 (60) sec. O O O O
1/100 (120) sec. O I O O
1/250 sec. O O I O
1/500 sec. O I I O
1/1,000 sec. O O O I
1/2,000 sec. O I O I
1/4,000 sec. O O I I
1/10,000 sec. O I I I
5. ME (Manual Exposure) Setting
AE-ME: I (ME position)
Manual Exposure means the exposure of camera is controlled
by fixed shutter speed and gain. Different shutter speed and
gain can be set via combination of DIP switch. The setting of
DIP switch no. 2, 3, 4 (Table 3) determine shutter speeds and
DIP switch no. 6, 7 (Table 4) determine gains.
Table 3. DIP switch setting for various shutter speeds (ME)
6
AE
FL-OFF
BLC
C-IRIS
NORM
Av
AGC
γ=.45
ME
FL
BLC-OFF
A-IRIS
AI SHUT
Pk
SUPER
γ=1
O I
AE
FL-OFF
BLC
C-IRIS
NORM
Av
AGC
γ=.45
ME
FL
BLC-OFF
A-IRIS
AI SHUT
Pk
SUPER
γ=1
O I
AE
FL-OFF
BLC
C-IRIS
NORM
Av
AGC
γ=.45
ME
FL
BLC-OFF
A-IRIS
AI SHUT
Pk
SUPER
γ=1
O I
2
DIP switch No. 1 2 3 4
Shutter Speed Switch position
1/50 (60) sec. I O O O
1/100 (120) sec. I I O O
1/250 sec. I O I O
1/500 sec. I I I O
1/1,000 sec. I O O I
1/2,000 sec. I I O I
1/4,000 sec. I O I I
1/10,000 sec. 1 I I I
Table 4. DIP switch setting for various AGC Gains
DIP Switch No. 1 6 7
Gain Switch position
0 dB I O O
6 dB I I O
12 dB I O I
18 dB I I O
6. BLC (Back Light Compensation)
MC-600 series features an intelligent digital BLC which consists state-of-the-
art Central Window Weighted Average (CWW) BLC and Histogram
Calculated (HC) BLC. The combination of these two types of BLC makes MC-
600 series to produce an optimum back light compensation at all time.
WINDOW 1
WINDOW 3 WINDOW 4
CENTRAL
WINDOW
WINDOW 2
6.1 Central Window Weighted Average BLC
7
2
The built-in DSP divides the screen into 225 (15 X 15) segments which are
specified into five detection windows. The integrated luminous intensity of
each window is continuously measured by weighing the value and the
average determines an accurate back light compensation. This type of BLC
is suitable for the applications that main object always locate at central area
of picture.
6.2 Histogram Calculated BLC
This intelligent BLC categorize the image into three parts (high-medium -low)
according to the brightness level of each pixel and calculate the histogram of
each part. With the integration of histogram of all three parts, the
microprocessor will determine the operation level of BLC. This type of BLC is
suitable for the areas where object will move around within the scene.
7. Technical specifications
Image device...........................1/3” interline transfer Super HAD CCD
Signal system..........................CCIR or EIA standard
Picture element .......................CCIR: 795(H) X 596(V), EIA: 811(H) X 508
Scanning system ....................CCIR: 625 lines, EIA: 525 lines
Sync. system...........................Internal (MC-600) / Line lock (MC-601/602)
Horizontal resolution...............600 TV lines
Minimum illumination..............0.02 lux @ F1.2
Aperture correction .................H aperture & V aperture enhanced
Gain.........................................Max. 36 dB; AGC off
S/N ratio ..................................Better than 50 dB
Auto. Exposure system...........4 modes selectable via DIP switch setting
AE electronic iris mode...........1/50(CCIR), 1/60(EIA) ~ 1/100,000 sec.
AE flickerless mode ................1/100(EIA), 1/120(CCIR) sec.
AE mechanical iris mode ........1/50 (CCIR), 1/60(EIA) sec.
Manual exposure system Shutter: 1/50(1/60), 1/120, 1/250, 1/500, 1/1,000, 1/2,000,
1/4,000, 1/10,000 sec.
Manual Gain ........................... 0, 6, 12, 18 dB
Auto iris lens............................Video/DC drive lens available
Gamma ...................................0.45
Back light compensation ........Histogram plus central window weight BLC
Video output signal .................Composite: 1 V p-p, 75Ω load
Lens mount .............................C & CS mount acceptable
Operation temperature ...........-10°C ~ 50°C (14°F ~ 122°F )
Power supply ..........................MC-600: 12 VDC
8
/