2. Premio
  3. RCO-1000-J1900-10G

Premio RCO-1000-J1900-10G User manual

  • Hello, I'm your chat assistant. I've reviewed the user manual for the Premio RCO-1000-J1900-10G Compact Fanless Embedded System. This document covers the product's features, installation procedures, jumper and connector details, as well as BIOS setup. I'm ready to answer your questions about this device.
  • What is the operating temperature range of the RCO-1000-J1900-10G?
    What type of power input does the RCO-1000-J1900-10G support?
    What kind of display outputs are available on the RCO-1000-J1900-10G?
USER’S
MANUAL
RCO-1000-J1900-10G
Compact Fanless Embedded System
RCO-1000-J1900-10G | User’s Manual
2
Please note, the RCO-1030G is now
referred to as "RCO-1000-J1900-10G" due
to a model name change. All product
features and functionality remain the
same. If any questions, please contact
us for more information.
Name Change Guide:
LEGACY Model Name
NEW Model Name
RCO
-1010G
RCO
-1000-J1900-10G
RCO-1000-J1900-10G | User’s Manual
Table of Contents
Prefaces …………………………………………………….……………………………………………. 04
Revision …………………………………………………………………………………………..……………….……….. 04
Disclaimer ………………………………………………………..…….…….………………………….……………….. 04
Copyright Notice …………………………………….…………………….…………………………………………… 04
Trademarks Acknowledgment …………..………………………………………………………...................04
Environmental Protection Announcement …………………………….………………….……………….. 04
Safety Precautions ………………………………………….……………………………….…………….………….. 05
Technical Support and Assistance …………………………………….…………….…………….…………….06
Conventions Used in this Manual ………………………………………………………………….….………..06
Package Contents …………………………………………………………………………………………….…………07
Ordering Information …………………………………….……………………………………….……….………… 07
Optional Accessory …………...……………………………………..................................................... 07
Chapter 1 Product Introductions ………………………………………………………..… 08
1.1 Overview ……………………….………………………………..………….…………………………..09
1.1.1 Key Feature ………….……………………………………….……….…..…………….......09
1.2 Hardware Specification ….………………………….....…………….…………..………………10
1.3 System I/O ……………………………..……………………..…………………………………………11
1.4 Mechanical Dimension …………………………..…………………………..………….………. 12
Chapter 2 Jumpers and Connectors ……………………………………………………….13
2.1 Switch and connector Locations ………………………………………..…….……………....14
2.1.1 Top View ………………………………………………………………………..……………… 14
2.1.2 Bottom View ………………………………………………………………………..………..15
2.2 Connector / Switch Definition ……………………………….……….…….……….............16
2.3 Switch Definitions ………….……………...............................................................17
2.4 Connector Definitions ………………………….......................................................19
Chapter 3 System Setup …………………………..……………………………………………28
3.1 Set torque force to 3.5 kgf-cm to execute all the screwing and
unscrewing …………………………………………………………………………………………….. 29
3.2 Removing chassis bottom cover ……...……………………………………..………..……...29
3.3 Removing HDD bracket ………………….…..…….………………………….……………….…30
3.4 Removing chassis top cover .………………………………..……………….…..................31
3.5 Installing SODIMM ……………………………………………….…………………….…………....32
3.6 Installing Mini PCIe card / mSATA …….…………………….……..….……………….……..33
3.7 Installing antenna ………………..……………………………………………………..…………... 34
3.8 Assemble chassis top cover …..……………………………………………………...............36
3.9 Installing SATA HDD ……………..……………………..….………………………..………..…....38
3.10 Assemble chassis bottom cover …..……………………………………………............... 40
3.11 Installing SIM card ……………..…………..………..….………………………………..……......41
3.12 Installing wall mount kit …………………….…………..….…………………..………….…....43
3.13 Installing VESA mount kit …….…………..….…..….………………………………………….. 44
3.14 Installing side mount kit …….…………..….…….….………………………………………….. 46
3.15 Installing DIN rail holder …….…………..….…..…...…………………………………………..48
3
RCO-1000-J1900-10G | User’s Manual
4
Chapter 4 BIOS Setup …………………………………………………………………………… 49
4.1 BIOS Introduction …….……….……………………………………..….…….…..….…………...50
4.2 Main Setup ……..……….………………….…………………………..…….….………………......51
4.3 Advanced Setup ………………………………………………………..…………………………….. 52
4.3.1 ACPI Settings ……..…………………………………………………………..……………….52
4.3.2 Super IO Configuration …………………………….………..…………………..……... 53
4.3.3 Hardware Monitor ………………………………………….………………………..…....57
4.3.4 Serial Port Console Redirection …………………………………....……..…….....57
4.3.5 CPU Configuration ……………………………..……………….………….….…….…....58
4.3.6 PPM Configuration ..……………………………………………..…………..………..... 59
4.3.7 SATA Configuration ……..………………………………..………………………….......60
4.3.8 OS Selection ……………………………………………………………………..…………....60
4.3.9 Compatibility Support Module Configuration ………………………………….61
4.3.10 USB Configuration …………………………………………………………………..……..62
4.4 Chipset …………...……….………………….…..….…..………………………………………..…....63
4.4.1 North Bridge ………….…………………………………………………..………………….. 63
4.4.2 South Bridge ………….………………………………………………..…………………….. 65
4.5 Security …………...……….………………….…..….…..………………………………..…………...67
4.6 Boot …………...……….….………………….…..…………………………..…………..……………...68
4.7 Save & Exit …...……….….………………….…..….…..……………………………..………….....69
Appendix WDT & GPIO …………………………………………………………………………… 70
WDT Sample Code …….……………….………….…….……………………..….…….…….…………... 71
GPIO Sample Code ………………………………..…………………………………………………………. 72
RCO-1000-J1900-10G | User’s Manual
5
Revision
Disclaimer
All specifications and information in this User’s Manual are believed to be accurate and up to date. Premio
Inc. does not guarantee that the contents herein are complete, true, accurate or non-misleading. The
information in this document is subject to change without notice and does not represent a commitment on
the part of Premio Inc.
Premio Inc. disclaims all warranties, express or implied, including, without limitation, those of
merchantability, fitness for a particular purpose with respect to contents of this User’s Manual. Users must
take full responsibility for the application of the product.
Copyright Notice
All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means,
electronic or mechanical, including photocopying, recording, or information storage and retrieval systems,
without the prior written permission of Premio Inc. Copyright © Premio Inc.
Trademarks Acknowledgment
Intel®, Celeron® and Pentium® are trademarks of Intel Corporation.
Windows® is registered trademark of Microsoft Corporation.
AMI is trademark of American Megatrend Inc.
IBM, XT, AT, PS/2 and Personal System/2 are trademarks of International Business Machines Corporation
All other products and trademarks mentioned in this manual are trademarks of their respective owners.
Environmental Protection Announcement
Do not dispose this electronic device into the trash while discarding. Please recycle to minimize pollution
and ensure environment protection.
Prefaces
Revision
Description
Date
1.0
Manual Released
2019/09/12
RCO-1000-J1900-10G | User’s Manual
6
Safety Precautions
Before installing and using the equipment, please read the following precautions:
⚫Put this equipment on a reliable surface during installation. Dropping it or letting it fall could
cause damage.
⚫The power outlet shall be installed near the equipment and shall be easily accessible.
⚫Turn off the system power and disconnect the power cord from its source before making any
installation. Be sure both the system and the external devices are turned OFF. Sudden surge
⚫of power could ruin sensitive components. Make sure the equipment is properly grounded.
⚫When the power is connected, never open the equipment. The equipment should be opened
only by qualified service personnel.
⚫Make sure the voltage of the power source is correct before connecting the equipment to the
power outlet.
⚫Disconnect this equipment from the power before cleaning. Use a damp cloth. Do not use
liquid or spray detergents for cleaning.
⚫Avoid the dusty, humidity and temperature extremes.
⚫Do not place heavy objects on the equipment.
⚫If the equipment is not used for long time, disconnect it from the power to avoid being
damaged by transient over-voltage.
⚫The storage temperature shall be above -40°C and below 85°C.
⚫The computer is provided with a battery-powered real-time clock circuit. There is a danger of
explosion if incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer.
⚫If one of the following situation arises, get the equipment checked be service personnel:
•The power cord or plug is damaged.
•Liquid has penetrated into the equipment.
•The equipment has been exposed to moisture.
•The equipment does not work well or it cannot work according the user’s manual.
•The equipment has been dropped and damaged.
•The equipment has obvious signs of breakage.
Preface
RCO-1000-J1900-10G | User’s Manual
7
Technical Support and Assistance
1. Visit the Premio Inc. website at www.premioinc.com where you can find the latest information
about the product.
2. Contact your distributor, our technical support team or sales representative for technical support if
you need additional assistance. Please have following information ready before you call:
⚫Model name and serial number
⚫Description of your peripheral attachments
⚫Description of your software (operating system, version, application software, etc.)
⚫A complete description of the problem
⚫The exact wording of any error messages
Conventions Used in this Manual
Preface
This indication alerts operators to an operation that, if not strictly observed,
may result in severe injury.
WARNING
This indication alerts operators to an operation that, if not strictly observed,
may result in safety hazards to personnel or damage to equipment.
CAUTION
This indication provides additional information to complete a task easily.
NOTE
RCO-1000-J1900-10G | User’s Manual
8
Package Contents
Before installation, please ensure all the items listed in the following table are included in the package.
Item Description Q’ty
1RCO-1000 Series Embedded System 1
2Utility DVD Driver 1
3Wall Mount Kit 1
4 Accessory Kit 1
5 DVI to VGA Adapter 1
Ordering Information
Preface
Model No. Product Description
RCO-1010G-J1900 Compact Fanless Embedded System with with Intel® Celeron® J1900 CPU, Power Ignition
Optional Accessories
Model No. Product Description
1
-E09A06007
Adapter AC/DC 12V 5A 60W with 3pin Terminal Block Plug 5.0mm Pitch
SFICBL022
Power Cord, 3
-pin US Type, 180cm
1
-TPCD00002
Power Cord, European Type, 180cm
1
-TPCD00001
Power Cord, 3
-pin UK Type, 180cm
3
-SIDE-0002
RCO
-1010 Series Side Mount Kit
3
-VESA-0003
RCO
-1000 Series VESA Mount Kit
3
-DINR-0003
DIN
-Rail Mount Kit
Chapter 1
Product Introductions
RCO-1000-J1900-10G | User’s Manual
10
1.1.1 Key Features
⚫Intel® Celeron® J1900 (2.0GHz) Quad Core processor
⚫1x DDR3L SO-DIMM max. up to 8GB
⚫Dual Independent Display from 1x DVI-I
⚫2x Intel® GbE port, support Wake-on-LAN and PXE
⚫1x USB 3.0, 3x USB2.0
⚫2x RS232/422/485 port
⚫1x 2.5” SATA SSD/HDD bay, 1x mSATA and 2x SIM card socket
⚫9~48VDC wide range power input, support AT/ATX mode
⚫2x Mini-PCIe slot for Wi-Fi, GSM, or I/O expansion
⚫-40°C to 70°C extended operating temperature
⚫Power ignition management
1.1 Overview
Based on Intel® Celeron® J1900 (2.0GHz) Quad Core processor, RCO-1010G is a high variety and
diversity fanless embedded system. It offers modularize expansion I/O, rich connectivity interfaces,
wide range (9~48V) DC power input, and high reliability even operating in temperature extremes (-25
°
C
~ +70
°
C).
Featuring with completely cable-less designed, high functional, one-piece housing design, and anti-
vibration, RCO-1000 series are ruggedized systems that can operate in harsh environments and easy to
install and maintain. A build in over voltage protection (OVP), over current protection (OCP), reserve
voltage protection, and wide range DC power input makes RCO-1000 series are safety system for all
industrial applications.
Chapter 1: Product Introductions
RCO-1000-J1900-10G | User’s Manual
11
Processor System
•Onboard Intel® J1900 Quad Core Processor, 2.0 GHz
with AMI 64Mbit SPI BIOS.
Memory
•1x 204-Pin DDR3L-1066/ 1333MHz, max. up to 8GB
Display
Dual Display
•1x DVI-I and 1x VGA (w/ Optional Split Cable)
Expansion
•2x Full-size Mini PCIe Socket for Wi-Fi / GSM / Expansion
Module
•1x Universal I/O Bracket
Ethernet
•2 x Intel® I210-AT GbE LAN Port, Support Wake-on-LAN
and PXE
Audio
•Realtek ALC888S Audio Codec
•1x Mic-in and 1x Line-out
Watchdog Timer
•Software Programmable Supports 1~255 sec. System
Reset
Storage
•1x 2.5" SATA SSD/HDD Bay
•1x mSATA (share by 1x Mini-PCIe Socket)
•2x External SIM Card Socket
I/O Ports
•1x USB 3.0 Port
•3x USB 2.0 Port
•2 x DB9 for COM1~2, Support RS232/422/485 with Auto
Flow Control
•4x Antenna Hole
•1x Power Switch
•1x Remote Power Switch
•1x Reset Hole
•1x AT/ATX Switch
Power
•Support AT, ATX Mode
•1x 3-pin Terminal Block Connector with Power Input
9~48VDC
•Power Ignition Management
•1x Optional AC/DC 12V/5A, 60W Power Adapter
Environment
•Operating Temperature: Ambient with Air Flow:
-40°C to 70°C (with Industrial Grade Peripherals)
•Storage Temperature: -40°C to 85°C
•Relative humidity: 10%~95% (non-condensing)
Physical
•Dimension (WxDxH, mm): 150 x 105 x 49 mm
•Weight: 0.85 kg
•Construction: Extruded Aluminum with Heavy Duty
Metal
•Mounting: Wall, Optional VESA / Side / DIN-Rail
Mounting
Operating System
•Windows 10, Windows 8.1, WES8.1, Windows 7, WES7
•Linux kernel 3.X
Certifications
•CE
•FCC Class A
1.2 Hardware Specification
Chapter 1: Product Introductions
RCO-1000-J1900-10G | User’s Manual
12
1.3 System I/O
Chapter 1: Product Introductions
Front Panel
ATX power on/off switch
Press to power-on or power-off the system
AT/ATX mode select switch
Used to select AT or ATX power mode
Power LED
Indicates the power status of the system
HDD LED
Indicates the status of the hard drive
Wachdog LED
Indicates the watchdog status of the system
USB 3.0 port
Used to connect USB 3.0/2.0/1.1 device
USB 2.0 port
Used to connect USB 2.0/1.1 device
SIM card
Used to insert a SIM card
LAN port
Used to connect the system to a local area
network
Line-out
Used to connect a speaker
Mic-in
Used to connect a microphone
Remote power on/off switch
Used to plug a power on/off switch with
terminal block
Reset Hole
Used to reset the system
Antenna hole
Used to connect an antenna for optional Mini-
PCIe WiFi module
Rear Panel
DC IN
Used to plug a DC power input with terminal
block
DVI-I port
Used to connect a DVI monitor or connect
optional split cable for dual display mode
COM port
COM1 ~ COM2 support RS232/422/485 serial
device
Antenna hole
Used to connect an antenna for optional Mini-
PCIe WiFi module
Expandable I/O bracket
Used to customized I/O output (RCO-1010 only)
RCO-1000-J1900-10G | User’s Manual
13
1.4 Mechanical Dimensions
Unit: mm
Chapter 1: Product Introductions
Chapter 2
Switches and Connectors
RCO-1000-J1900-10G | User’s Manual
15
2.1 Switch and Connector Locations
2.1.1 Top View
Chapter 2: Switches and Connectors
RCO-1000-J1900-10G | User’s Manual
16
2.1.2 Bottom View
Chapter 2: Switches and Connectors
RCO-1000-J1900-10G | User’s Manual
17
2.2 Connector / Switch Definition
List of Connector / Switch
Connector Location Definition
1
AT
/ ATX Power Mode Switch
1
Clear
BIOS Switch
1
Power
Switch
1
Power
LED Status
1
HDD
Access LED Status
1
Watchdog
LED Status
, USB2_2, USB2_3
USB
2.0 Port
USB
3.0 Port
1, LAN2
LAN
Port
1, SIM2
SIM
Card Socket
1
Line
-out Jack
1
Mic
-in Jack
2
Remote
Power Switch
1
Reset
Switch
1
3
-pin DC 9~48V Power Input Connector
1
DVI
-I Connector
, COM2_1, CN1, CN2
RS232
/ RS422 / RS485 Connector
DisplayPort
Connector
4DI
/ 4DO Connector
1
Mini
PCI-Express Socket
3
Mini
PCI-Express / mSATA Socket
1
SATA
with Power Connector
Chapter 2: Switches and Connectors
RCO-1000-J1900-10G | User’s Manual
Switch Definition
1-2 (Right)
ATX Power Mode
（Default）
2-3 (Left)
AT Power Mode
18
2.3 Switches Definitions
AT_ATX1: AT / ATX Power Mode Switch
CLR_CMOS1: Clear BIOS Switch
Switch Definition
Off Normal Status (Default)
ON Clear BIOS
Chapter 2: Switches and Connectors
Switch 4 / 5 / 6 Power off delay time
ON / ON / ON
3 second
ON / ON / OFF
1 minute
ON / OFF / ON
5 minutes
ON / OFF / OFF
10 minutes
OFF / ON / ON
30 minutes
OFF / ON / OFF
1 hour
OFF / OFF / ON
2 hours
DELAY_TIME1: Power off delay time setup Switch
Switch 2 / 3 Power Input Mode
ON / OFF
Battery 24
V Input
OFF / ON
Battery
12V Input
Switch 1 Car / PC Mode
ON
Power
Ignition Mode
OFF
PC Power Mode
RCO-1000-J1900-10G | User’s Manual
19
Chapter 2: Switches and Connectors
Step of Setting Power Ignition
Step 1
To select power ignition by PC/CAR switch.
Step 2
To select battery input voltage by 12V / 24V switch.
Step 3
To configure the power off delay time, please check the Delay Time Setting Options in advance.
Step 4
To connect the power and ignition power
Example: Delay Time Setting for 5 minutes
1. If delay time set as “5 minutes”
2. The system will shut down 5 minutes later after
turning off the vehicle.
Switch 4 / 5 / 6 Power off delay time
ON / ON / ON
3 second
ON / ON / OFF
1 minute
ON / OFF / ON
5 minutes
ON / OFF / OFF
10 minutes
OFF / ON / ON
30 minutes
OFF / ON / OFF
1 hour
OFF / OFF / ON
2 hours
Step 4
To connect the battery power and
ignition power
Switch 2 / 3 Power Input Mode
ON / OFF
Battery 24
V Input
OFF / ON
Battery
12V Input
Switch 1 Car / PC Mode
ON
Power
Ignition Mode
OFF
PC Power Mode
Step 2
Step 1 Step 3
RCO-1000-J1900-10G | User’s Manual
20
2.4 Connectors Definitions
PWR_SW1: Power Button
Pin Definition Pin Definition
1NC 4GND
2
Power Button
5NC
3NC 6GND
PWR_LED1: Power LED Status
Pin Definition
1 POWER LED+
2 POWER LED-
Pin Definition
1 HDD LED+
2 HDD LED-
HDD_LED1: HDD Access LED Status
Pin Definition
1 HDD LED+
2 HDD LED-
WDT_LED1: Watchdog LED Status
USB2_1, USB2_2, USB2_3: USB2.0 Connector, Type A
Chapter 2: Switches and Connectors
Pin USB2_1 Definition USB2_2 Definition USB2_3 Definition
1 +5V +5V +5V
2 USB2_D2- USB2_D3- USB2_D4-
3 USB2_D2+ USB2_D3+ USB2_D4+
4GND GND GND
USB3_1: USB 3.0 Connector, Type A
Pin Definition Pin Definition
1 +5V 6 USB3_RX+
2 USB2_DATA1- 7 GND
3 USB2_DATA1+ 8 USB3_TX-
4GND 9 USB3_TX+
5 USB3_RX-
/