2. BENCHDOGS
  3. TD-020
TD-020

BENCHDOGS TD-020 User manual

  • Hello! I have reviewed the instruction manual for Quad Dogs. This document provides clear, step-by-step guidance on assembling your Quad Dogs using the Quad Base and the Dog. It emphasizes how to properly secure your Quad Dogs in an MFT hole. I'm ready to assist you with any questions you may have about this product's assembly or use.
  • What components are included in the kit?
    Do these instructions apply to all dog sizes?
    How should I secure the Quad Dog?
INSTRUCTION MANUAL
Quad Dogs™
WHAT’S IN THE KIT
1 x Quad Base ◄
1 x Dog ◄
Whichever size dog you
need you will also need
a quad dog base. These
instructions apply for every
size dog we make. We are
using a 60mm dog for the
purposes of demonstration.
FIND ALL INSTRUCTION MANUALS AT
WWW.BENCHDOGS.CO.UK
QUAD BASE
DOG
CONTACT@BENCHDOGS.CO.UK WWW.BENCHDOGS.CO.UK Q E M
FOR MORE INFORMATION PLEASE VISIT
Put the base together as shown. Screw the dog onto the base
- not too tightly.
Push the Quad Dog through your
MFT hole and tighten as much as
possible. The Quad Dog should now
be tight and secure in place.
STEP 1
STEP 2 STEP 3
Quad Dogs™
/