2. ROOMS TO GO
  3. 73320269

ROOMS TO GO 73320269, 73320271 Assembly Instructions

  • Hello! I'm your chat assistant. I've reviewed the assembly instructions for the SOLANA KD SHGP End Table. This document details the two-step process for putting together your new end table using bolts, washers, and an Allen key. I'm ready to answer any questions you have about the assembly process or the parts involved.
  • How many parts are included in the package?
    What tool is required for assembly?
    What is the first step in the assembly process?
ASSEMBLY INSTRUCTIONS
SHGP SOLANA KD END TABLE
Manufactured for Rooms To Go SKU 73320269/73320271
Thanks for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which may have come
loose inside the carton during shipment. Identify and count all parts and compare with the Hardware List below
Step 1: Place the Top(Part A) on a clean, soft surface as a blanket or carpet with bottom upward. Assemble the Leg(Part B) to the
Top(Part A) by Bolt M6*20(Part D) and washer(Part Y), middle position first, left and right sides second, tighten with Allen Key(Part
Z).Put the Bolt Head Cap(Part X) on the Bolts.
Step 2: After assembly, your product is ready for use.
①
③④
②
D
PARTS LIST PARTS LIST
NO.: PIC DESC QTY NO.: PIC DESC QTY
A Top 1pc D Bolt(M6*20) 6pcs
B Leg 2pcs X Bolt Head Cap(Φ14*6) 6pcs
Y Washer(Φ14* Φ6.5*1.0) 6pcs Z Allen Key 1pc
Periodically check and make sure all bolts are fully tightened.
/