ROOMS TO GO 90221676 Assembly Instructions

ROOMS TO GO
Brand
ROOMS TO GO
Model
90221676
Type
Assembly Instructions

This manual is also suitable for

ROOMS TO GO 90221676 is a portable lamp with a stylish design, perfect for adding a touch of elegance to any room. It features a sturdy metal construction with a weighted base for stability, ensuring it won't easily tip over. The lamp's adjustable height and shade allow you to direct light where you need it most, making it ideal for reading, working, or creating a cozy ambiance. With its easy-to-use rotary switch, you can conveniently turn the lamp on and off without having to fumble with cords or plugs.

ROOMS TO GO 90221676 is a portable lamp with a stylish design, perfect for adding a touch of elegance to any room. It features a sturdy metal construction with a weighted base for stability, ensuring it won't easily tip over. The lamp's adjustable height and shade allow you to direct light where you need it most, making it ideal for reading, working, or creating a cozy ambiance. With its easy-to-use rotary switch, you can conveniently turn the lamp on and off without having to fumble with cords or plugs.

4269-21 1.0
Assembly Instructions (English)
Tel: (212) 736 4440 Fax: (212) 736 4806
www.adessohome.com
ASSEMBLY INSTRUCTION FOR
Carmen Floor Lantern
Model# 4269-21
21 Penn Plaza Suite 909 New York,NY 10001
1. Screw the pole (B) onto base (A) clockwise
until tight, and screw poles (B), (C) and (D)
together. You may need to pull any excess cord
gently through the base so that these two parts
fit.
2. Screw bulbs in before applying shade (E).
3. Put shade (E) onto pole (D), by using finial
(F) to tighten it.
4. Tighten the pre-assembled metal buckle by
using wrench (G) when fixing shade (E). Hook
bottom shade wire onto metal buckle.
GENERAL PRODUCT INFORMATION:
This product is suitable
for dry locations only.
---------------------------------------------------------------
IMPORTANT SAFETY INSTRUCTIONS:
This portable lamp has a polarized plug as a feature to
reduce the risk of electric shock (one blade is larger
than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a
qualified electrician.Do not use with an extension cord
unless the plug can be fully inserted. DO NOT
ALTER THE PLUG .
-------------------------------------------------------
BULB TYPE: Use only with maximum of 3*100 watt
incandescent bulbs (bulbs not included).
PARTS DIAGRAM
(1) * finial (F) (1) * wrench (G)
4269-21 1.0
INSTRUCCIONES DE ENSAMBLAJE PARA
Carmen Lámpara de Piso
Modelo# 4269-21
21 Penn Plaza Suite 909 New York,NY 10001
Tel: (212) 736 4440 Fax: (212) 736 4806
www.adessohome.com
1. Enrosque el poste (B) en la base (A) hacia la
derecha hasta que quede apretado, y enrosque los
postes(B), (C) y (D) juntos. Es posible que tenga que
halar suavemente cualquier exceso de cable a través
de la base para que estas dos partes encajen.
2. Enrosque las bombillas antes de colocar la
pantallla (E).
3. Coloque la pantalla (E) en el poste (D), y use el
florón (F) para apretarla.
4. Apriete la hebilla metálica premontada usando la
llave (G) cuando fije la pantalla (E) enganche el
alambre inferior de la pantalla sobre la hebilla
metálica ubicada en el poste.
INFORMACION GENERAL DEL PRODUCTO:
Este producto es adecuado sólo
para lugares secos.
---------------------------------------------------------------
INSTRUCCIONES IMPORTANTES DE
SEGURIDAD:
Esta lámpara portátil tiene un enchufe polarizado (una paleta
es más ancha que la otra), función de seguridad que reduce el
riesgo de una descarga eléctrica. Este enchufe encajará en un
tomacorriente polarizado en un sólo sentido. Si el enchufe no
entra completamente en el tomacorriente, invierta el enchufe.
Si aún así no encaja, llame a un electricista calificado. Nunca
use un cable de extensión a menos que el enchufe pueda
insertarse por completo. NO MODIFICAR EL ENCHUFE.
-------------------------------------------------------
TIPO DE BOMBILLA: Use sólo con 3* bombillas
incandescentes de 100 Vatios máximo (bombillas no
incluidas).
DIAGRAMA DE LAS PARTES
(1) * Florón (F) (1) * Llave (G)
  • Page 1 1
  • Page 2 2

ROOMS TO GO 90221676 Assembly Instructions

ROOMS TO GO
Brand
ROOMS TO GO
Model
90221676
Type
Assembly Instructions
This manual is also suitable for

ROOMS TO GO 90221676 is a portable lamp with a stylish design, perfect for adding a touch of elegance to any room. It features a sturdy metal construction with a weighted base for stability, ensuring it won't easily tip over. The lamp's adjustable height and shade allow you to direct light where you need it most, making it ideal for reading, working, or creating a cozy ambiance. With its easy-to-use rotary switch, you can conveniently turn the lamp on and off without having to fumble with cords or plugs.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents