Extron RSU 129 User manual

Category
Rack accessories
Type
User manual

This manual is also suitable for

Extron RSU 129 is an IP Link Pro receiver that provides high performance signal extension of HDMI, audio, and control up to 330 feet (100 meters) over a single CATx cable. It supports video resolutions up to 4K, HDR, and HDCP 2.2, ensuring excellent image quality and compatibility with the latest sources and displays. The RSU 129 also features built-in scaling, allowing you to adapt the output resolution to match the display's native resolution for optimal viewing.

Extron RSU 129 is an IP Link Pro receiver that provides high performance signal extension of HDMI, audio, and control up to 330 feet (100 meters) over a single CATx cable. It supports video resolutions up to 4K, HDR, and HDCP 2.2, ensuring excellent image quality and compatibility with the latest sources and displays. The RSU 129 also features built-in scaling, allowing you to adapt the output resolution to match the display's native resolution for optimal viewing.

68-195-01 Rev. G
03 17
Extron Headquarters
+1.800.633.9876 (USA/Canada)
Extron Europe
+31.33.453.4040
Extron Asia
+65.6383.4400
Extron Japan
+81.3.3511.7655
Extron China
+86.21.3760.1568
Extron Middle East
+971.4.2991800
Extron Australia
+61.8.8351.2188
Extron India
+91-80-3055.3777
© 2017 Extron Electronics All rights reserved. www.extron.com
Use 2 mounting holes
on opposite corners.
F
alse front panel
uses 2 holes.
Figure 1. Secure Product to Shelf
Figure 2. Secure Shelf to Rack
Extron Rack Shelf Installation Guide
This guide details the installation of Extron products of various sizes onto Extron 9-inch,
6-inch, and 3-inch deep, 1U rack shelves and the installation of the shelves into a standard
rack. Each rack shelf can accommodate a mix of devices in varying widths and depths,
depending on the depths of the shelf (see the gures at right).
Installation
Mount the product on the shelf and mount the shelf in a rack, as follows:
1. Mount one or more Extron products on the rack shelf, using two supplied
#4-40 x 3/16 inch screws in opposite corners (see gure 1).
NOTE: When mounting products one behind the other, as shown in the top
drawing at right, leave at least one rear mounting location empty for cable
routing.
2. Fill any unused spaces with a combination of Extron Rack False Front Faceplate Kits
(eighth rack, quarter rack, and half rack; supplied with universal shelf kits and optional for
basic shelves), fastened with two #4-40 x 3/16 inch screws (see gure 1).
3. Secure the shelf to the rack using the supplied #10-32 machine screws
(see gure 2).
Extron Rack Shelf Installation Guide (continued)
Dimensions
Figure 3. Rack Shelf Dimensions
Height (1U) Width (usable) Width (with rack ears) Depth
9-inch rack shelf
1.73" (4.4 cm) 17.5" (44.5 cm) 19" (48.25 cm)
9.5" (24.1 cm)
6-inch rack shelf 6.5" (16.5 cm)
3-inch rack shelf 3.5" (8.9 cm)
1/4 Rack
Width
1/2 Rack
Width
1/8 Rack
Width
9-inch
rack shelf
Height
Width (usable)
Width (with rack ears)
Depth
DISTRIBUTION AMPL
IFIER
DISTRIBUTION AMPL
IFIER
1/4 Rack
Width
1/8 Rack
Width
3-inch
rack shel
f
  • Page 1 1

Extron RSU 129 User manual

Category
Rack accessories
Type
User manual
This manual is also suitable for

Extron RSU 129 is an IP Link Pro receiver that provides high performance signal extension of HDMI, audio, and control up to 330 feet (100 meters) over a single CATx cable. It supports video resolutions up to 4K, HDR, and HDCP 2.2, ensuring excellent image quality and compatibility with the latest sources and displays. The RSU 129 also features built-in scaling, allowing you to adapt the output resolution to match the display's native resolution for optimal viewing.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI