VESA Bracket for Flex Net Viewer
(75mm x 75mm, 100mm x 100mm)
BRK-VL01-75, BRK-VL01-100
User’s Guide
CONTEC CO.,LTD.
Thank you for purchasing this product. This is a metal fitting to fix CONTEC FlexNetViewer.
Using this metal fitting, you can fix the FlexNetViewer anywhere you like with some screws.
Product Configuration
This product is configured as follows. Be sure you have received all of the components listed.If any
components are missing or broken, contact the store where you purchased this product.
Your registration card is essential for us to notify our customers of new products. Be sure to fill it out
completely and return it.
- Bracket (BRK-VL01-75 or BRK-VL01-100)…1 - User’s Guide (this document)…1
- M4 x 8 sems screw…4 - M3 x 6 sems screw(BRK-VL01-75 only)…4
- M3 x 5 flat-head screw (BRK-VL01-100 only)…4
Using Method
1. Fix the FlexNetViewer to this product using the M3 x 6 sems screws or M3 x 5 flat-head
screws that came with this product.
However if this is BRK-VL01-75, fix it first to the LCD monitor and then secure the
FlexNetViewer.
2. Secure the assembled product to the LCD monitor by screwing the attached M4 x 8 sems screws
into the holes at the four corners of this product.
Please refer to the manual of the FlexNetViewer product for how to secure the LCD monitor.
Figure 1. Using Method (BRK-VL01-75) Figure 2. Using Method (BRK-VL01-100)
1 BRK-VL01-75, BRK-VL01-100
BRK-VL01-75, BRK-VL01-100 User’s Guide
External View and Dimensions
(24)
(7)
(90)
(135.8)
75
27
15
7
68.6
86
75
10
1.2
φ
5
10
1.2
[mm]
(24)
(1.2)
112
100
112
100
74
φ5
2
[mm]
Figure 3. External View and Dimensions Figure 4. External View and Dimensions
(BRK-VL01-75) (BRK-VL01-100)
Specifications
Table 1. Specifications
Item BRK-VL01-75 BRK-VL01-100
Weight 95g 120g
CAUTION
- The specifications of this product are subject to change without notice for quality improvement.
Even when using the product continuously, be sure to read the manual and understand the contents.
- Regardless of the foregoing statement, CONTEC assumes no responsibility for any errors that may
appear in this document or for any results of using the product.
- Brand and product names are trademarks of their respective holder.
- All relevant issues have been considered in the preparation of this document. Should you
notice an omission or any questionable item in this document, please feel free to notify CO
NTEC CO., LTD.
Copyright 2007 CONTEC CO., LTD. ALL RIGHTS RESERVED.
CONTEC CO., LTD. October 2007 Edition
3-9-31, Himesato, Nishiyodogawa-ku, Osaka 555-0025, Japan
Japanese http://www.contec.co.jp/
English http://www.contec.com/ A-51-521 (LYHY091)
Chinese http://www.contec.com.cn/ [10172007]
No part of this document may be copied or reproduced in any form by any means without prior written
consent of CONTEC CO., LTD.
/
