Thermaltake ST0016U User manual

ST0016U
Thermaltake
Brand
Thermaltake
Model
ST0016U
Category
HDD/SSD enclosures
Type
User manual

This manual is also suitable for

Thermaltake ST0016U is an enclosure designed to house and protect a Serial ATA hard disk drive (HDD) or solid state drive (SSD) for external use, providing a portable and accessible storage solution. Its features include:

  • SATA interface compatibility, supporting both HDD and SSD drives.
  • USB 2.0 and eSATA connectivity options for flexible data transfer.
  • Plug-and-play functionality for easy setup and use with various operating systems.
  • Aluminum alloy construction for durability and effective heat dissipation.
  • Compact and lightweight design for portability and ease of use.

Thermaltake ST0016U is an enclosure designed to house and protect a Serial ATA hard disk drive (HDD) or solid state drive (SSD) for external use, providing a portable and accessible storage solution. Its features include:

  • SATA interface compatibility, supporting both HDD and SSD drives.
  • USB 2.0 and eSATA connectivity options for flexible data transfer.
  • Plug-and-play functionality for easy setup and use with various operating systems.
  • Aluminum alloy construction for durability and effective heat dissipation.
  • Compact and lightweight design for portability and ease of use.
1. Loosen the screw 2. Install HDD on the carrying tray by
tightening the screws.
Note: Ensure the SATA connector
is connected firmly.
4. Tighten the screws.3. Slide the carrying tray back. 5. Connect USB or eSATA cable to the
enclosure and your PC.
6. Turn on the power switch.
© www.thermaltake.com2009 Thermaltake Technology Co., Ltd. All Rights Reserved.
English
Deutsch
Français
Español
Italiano
简体中文
Русский
Türkçe
日本語
繁體中文
1
2
3
4 5
6
P/N:ST0016 / ST0017
1. Lösen Sie die Schraube. 2. Installieren Sie die HDD auf dem
Laufwerksschacht, indem Sie die
Schrauben festziehen.
Anmerkung: Stellen Sie sicher, dass der
SATA-Anschluss sicher verbunden ist.
1. Desserez la vis. 2. Installez le disque dur sur le plateau de
chargement en serrant les vis.
Remarque : assurez-vous que le connecteur
SATA soit fermement connecté.
3. Repoussez le plateau de chargement
dans son logement.
4. Serrez les vis. 5. Connectez le câble USB ou eSATA au
boîtier et à votre PC.
6. Appuyez sur l’interrupteur
d’alimentation.
1. Vidayı gevşetin. 2. Vidaları sıkarak HDD’yi taşıyıcı tepsiye
takın.
Not: SATA konektörünün sıkı bir
şekilde bağlandığından emin olun.
3. Taşıyıcı tepsiye geriye doğru kaydırın. 4. Vidaları sıkın. 5. USB veya eSATA kablosunu kasaya ve
bilgisayarınıza bağlayın.
6. Açma/kapama düğmesini açın.
1. Ослабьте винт. 2. Установите жесткий диск в отсек и закрут
ите винты.
Примечание: Проверьте, чтобы разъем
SATA был плотно вставлен в разъем.
3. Закройте отсек обратно. 4. Закрутите винты. 5. Соедините устройство с ПК с помощью
кабеля USB или eSATA.
6. Установите переключатель питания
в положение включения.
1. ねじを緩めます。 2. ねじを締め付けながらキャリーイングトレ
イにHDDを取り付けます。
注:SATAコネクタがしっかり接続している
ことを確認します。
3. キャリーイングトレイを元に戻します。 4. ねじを締め付けます。 5. USBまたはeSATAケーブルを筐体と
PCに接続します。
6. 電源スイッチをオンにします。
1. 松开螺丝。 2. 拧紧螺丝以将硬盘安装于承载托盘上。
注意： 确保 SATA 连接器已牢固连接。
3. 滑回承载托盘。 4. 拧紧螺丝。 5. 将 USB 或 eSATA 缆线连接至机箱和计算机。 6. 开启电源开关。
1. 鬆開螺絲。 2. 鎖緊螺絲以將硬碟安裝於承載托盤上。
註： 確保 SATA 接頭已牢固連接。
3. 滑回承載托盤。 4. 鎖緊螺絲。 5. 將 USB 或 eSATA 纜線連接至機殼與電腦。 6. 開啟電源開關。
1. Allentare la vite. 2. Installare l’HDD nell’alloggiamento
fissando le viti.
Nota: verificare che il connettore SATA
sia collegato in modo saldo.
3. R e i n s e rire, f a c endol o s c orrer e ,
l’all o g g i a m e nto.
4. Serrare le viti. 5. Collegare il cavo USB o eSATA alla
presa e al PC.
6. Attivare l’interruttore di alimentazione.
1. Afloje los tornillos. 2. Instale el HDD en la bandeja de soporte
apretando los tornillos.
Nota: asegúrese de que el conector SATA
está conectado correctamente.
3. Introduzca la bandeja de soporte. 4. Apriete los tornillos. 5. Conecte el cable USB o el cable eSATA a
la caja y al PC.
6. Encienda el interruptor de alimentación.
3. Schieben Sie den Laufwerksschacht
wieder hinein.
4. Ziehen Sie die Schrauben fest. 5. Verbinden Sie das USB oder eSATA-
Kabel mit dem Gehäuse und Ihrem PC.
6. Schalten Sie die Stromzufuhr ein.
  • Page 1 1

Thermaltake ST0016U User manual

ST0016U
Thermaltake
Brand
Thermaltake
Model
ST0016U
Category
HDD/SSD enclosures
Type
User manual
This manual is also suitable for

Thermaltake ST0016U is an enclosure designed to house and protect a Serial ATA hard disk drive (HDD) or solid state drive (SSD) for external use, providing a portable and accessible storage solution. Its features include:

  • SATA interface compatibility, supporting both HDD and SSD drives.
  • USB 2.0 and eSATA connectivity options for flexible data transfer.
  • Plug-and-play functionality for easy setup and use with various operating systems.
  • Aluminum alloy construction for durability and effective heat dissipation.
  • Compact and lightweight design for portability and ease of use.
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents