TEAC HDR1600T User manual

WARRANTY REGISTRATION

Please read this warranty card.

Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service.

Warranty Terms & Conditions

1. TEAC warrants to the original retail purchaser only, that this product is free from

defects in material and workmanship under normal domestic use and authorises

free service during the warranty period at any TEAC Authorised Service Centre

only. TEAC warranty only applies to products purchased, used and serviced in

Australia.

2. Subject to the terms herein, this warranty effectively covers the equipment as

specified in the Warranty Periods Table below from the date of purchase.

TEAC PRODUCT

WARRANTY PERIOD

Plasma TV 106 cm and above 1 Year (In-Home Service Available)

LCD Televisions 59cm and above 1 Year (In-Home Service Available)

Televisions – 59cm and above 1 Year (In-Home Service Available)

All Televisions under 59 cm 1 Year (No In-Home Service)

Digital Set Top Boxes & Module 1 Year (No In-Home Service)

VCR 1 Year (No In-Home Service)

DVD & Module 1 Year (No In-Home Service)

DVD Recorder & PVR Module 1 Year (No In-Home Service)

Audio Systems 1 Year (No In-Home Service)

3. In home service will only be provided as part of this warranty if all the following

conditions are met;

a) The product as indicated in the Warranty Period Table.

b) The product is within the warranty period.

c) The product is located within the normal service area of the local TEAC

Authorised Service Centre.

In any other situation or circumstance, where an in home service call is made, a

service fee will be charged by the Service Provider including a travel fee if outside

normal service area.

If TEAC determines that the product is not repairable on site, TEAC can complete

the repair by taking the product to a TEAC Authorised Service Centre.

Where in-home service is not available, the purchaser is required to send the

product to the nearest TEAC Authorised Service Centre for repair. In this event, a

copy of this warranty card and a copy of your receipt of purchase must be

enclosed to be a valid warranty. Such equipment or part must be sent freight

prepaid to your nearest TEAC Authorised Service Centre. After the repair, the

product will be available for collection by or return to the purchaser at purchaser’s

cost. The warranty does not cover freight or insurance. In all cases of transit

damage or lost, a claim must be filed against the carrier by the purchaser, even if

shipment is arranged by TEAC. TEAC in-home service may also be available at a

fee upon request.

4. Accessories, Remote, including power adaptors, AV box, TV tuners, etc, are

warranted to be defect free for 1 year.

5. Replacement of spare parts under normal usage; except cabinet, front panel, knob,

removable accessories, battery, consumable, AC cord, connecting cord and other

accessories, are warranted as specified in Warranty Periods Table, and will be

repaired or replaced at the sole judgement of TEAC.

6. The warranties hereby conferred do not extend to, and exclude, any cost

associated with the installation, de-installation or re-installation of a product (be it

in-home or otherwise), including costs related to the mounting, demounting or

remounting of any screen, (and any other ancillary activities), delivery, handling,

freighting, transportation or insurance of the product or any part thereof or

replacement of and do not extend to, and exclude, any damage or loss occurring

by reason of, during, associated with, or related to such installation, de-installation,

re-installation or transit.

7. Normal customer maintenance as described in the owner’s manual is not covered

by this warranty (such as cleaning VCR heads etc.)

8. Service will be provided only during normal business hours and under safety

conditions and circumstances.

9. This warranty does not apply to equipment showing abuse, damage or that it may

have been tampered with, altered or repaired outside any TEAC Authorised

Service Centre. If so, the warranty will be void.

*Your nearest Authorised TEAC Service Centre is listed in your Owners

Manual

10. No one is authorised to assume any liability on behalf of TEAC or impose any

obligation on it, in connection with the sale of any equipment other than as stated

in this warranty and outlined above.

11. In no event will TEAC be responsible or liable for indirect or consequential

damages from interrupted operations or other causes.

12. Warranty is not transferable to any subsequent purchaser if the product is sold

during the warranty period,

Extended promotional warranty may apply to certain products (for more info please

contact: service@teac.com.au

)

In home service administration fee is applied after 1

st

year of warranty.

WARRANTY PROCEDURES

Please keep this information for your own records.

Please refer to the owner’s manual to ensure that you have followed the correct

installation and operating procedures.

1. Read owner’s manual carefully

2. If you require Warranty Service, please contact the TEAC Authorised Service

Centre

3. Please have your purchase receipt as your proof of purchase and the following

details completed for a valid Warranty.

Owner’s Name

Owner’s Address

Postcode

Model Name/No. Serial No.

Dealer’s Name

Dealer’s Address

Postcode

4. Please ensure that your product is packed appropriately upon return to the service

centre.

If you have any other queries regarding service or warranty please contact the TEAC

Customer Care Centre below:

[email protected]m.au

www.teac.com.au

1800 656 700

1

IMPORTANT SAFETY INSTRUCTIONS

1. Be sure to read

this user manual

before starting your

operation.

6. Install the unit

horizontally.

Unbalanced

installation may

cause damaged to unit.

2. Never open the

cover. It is very

dangerous to touch

the inside of the

unit due to possible electric shock.

7. When the unit is

suddenly moved to

a hot area from a

cold area, it may

cause problems. In that case, turn off

the power, and turn on after 1-2 hours.

3. When unit is not

in use for a long

time, please

disconnect power

cord from the main power outlet. Also,

do not use a power cord that is

damaged.

8.Install the unit in a

place with:

good ventilation

suitable temperature

no direct sunrays

low humidity

low vibration influence

4. Do not touch the

power with wet

hand. If there is

liquid flowing into

the unit, pull out the power cord

immediately because it may cause fire

or electric shock.

9. Do not put heavy

objects on the unit.

5. Place the unit in

a well ventilated

and no heat

environment.

2

SYMBOLS USED ON THE RECEIVER

The next paragraphs explain the meaning of the symbols, present on the receiver.

The Digital Video Broadcasting logo.

A broadcast standard for digital radio and television using

MEPG-2 compression.

The caution risk of electrical shock - do not open symbol

This symbol tells you that you are not allowed to open the receiver.

Only authorized (service) technicians are allowed to open the box.

The lightning flash with arrowhead symbol within an equilateral

triangle is intended to alert the user to the presence of uninsulated

“dangerous voltage” within the product’s enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to

persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature

accompanying the appliance.

The CE (Conformite European) marking

CE Marking is a mandatory mark for many of the products sold on

the EFTA plus European Union (EU) market (total 28 countries)

and it is often referred as the "Trade Passport to Europe" for

non-EU products.

3

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS..................................................................1

SYMBOLS USED ON THE RECEIVER ...................................................................2

GENERAL INFORMATION......................................................................................5

1. Preface ................................................................................................................. 5

2. Main Features....................................................................................................... 5

3. Accessories .......................................................................................................... 7

4. General Operation of STB .................................................................................... 7

OVERVIEW ..............................................................................................................8

1. Front Panel ........................................................................................................... 8

2. Rear Panel............................................................................................................9

3. Remote Control Unit ........................................................................................... 10

4. Connection Diagram ........................................................................................... 14

OPERATION ..........................................................................................................16

1. Installation........................................................................................................... 16

1.1 Auto Search ...................................................................................................... 17

1.2 Manual Search.................................................................................................. 17

1.3 Channel Edit ..................................................................................................... 18

1.4 Factory Default ................................................................................................. 19

2. Electronic Program Guide................................................................................... 19

3. Program Manage ................................................................................................ 20

3.1 Program Edit..................................................................................................... 20

3.2 Favorite Edit...................................................................................................... 21

4. Program Select ................................................................................................... 23

5. PVR Setting ........................................................................................................ 24

5.1 Record File Edit ................................................................................................ 24

5.2 Schedule........................................................................................................... 25

5.3 PVR Setting ...................................................................................................... 26

5.4 Recording Info .................................................................................................. 26

5.5 HDD Format...................................................................................................... 27

4

6. System Setting.................................................................................................... 27

6.1 Common Set..................................................................................................... 27

6.2 Video Set .......................................................................................................... 28

6.3 Audio Set .......................................................................................................... 28

6.3 Password Set.................................................................................................... 28

6.4 Time Zone Adjust.............................................................................................. 29

6.5 System Information........................................................................................... 29

7. Shortcut Key Explanations.................................................................................. 29

7.1 Audio................................................................................................................. 29

7.2 MUTE................................................................................................................ 30

7.3 TeleText............................................................................................................30

7.4 Information........................................................................................................ 30

7.5 EPG and EPG Schedule................................................................................... 31

7.6 Recall the favorite channel................................................................................ 31

7.7 File List ............................................................................................................. 31

7.8 PVR ASSIST..................................................................................................... 32

7.9 Time shift .......................................................................................................... 32

7.10 REC ................................................................................................................ 33

7.11 File playback................................................................................................... 34

7.12 Bookmark........................................................................................................ 36

SPECIFICATIONS..................................................................................................37

TROUBLE SHOOTING ..........................................................................................39

5

GENERAL INFORMATION

1. Preface

Thank you for purchasing our products.

This HDPVR is equipped with the latest technology and design; it can decode high

and standard definition digital TV programs, and can also record and playback

terrestrial digital broadcasts. You can view a variety of programs provided through

terrestrial. Simply press the power button on the remote control unit, the crystal clear

picture and DVD quality sound of digital broadcasting that your TV portrays through

this product, allows you to watch whatever channel you wish off the digital

broadcasting network.

Throughout this manual you will notice that the operation is easy to use.

In case you experience any difficulties using this product, please consult the

relevant section of the manual for assistance.

2. Main Features

MPEG-2 HD/SD decoding (MP@HL/ML)

Fully DVB-T & MPEG-2 compliant

Down-mixes 5.1 AC3 to two channels encoded with Dolby Prologic Surround, also

Support PCM digital audio output (Bitstream)

5000 Editable Channels

Auto or Manual installation

Electronic Program Guide and Information Plate (EPG)

RF modulator for TV standard (PAL B/G, NTSC)

Digital Audio Output S/P DIF

6

Signal level & quality indicator

Composite video output

Software upgradeable via RS-232 serial port

Auto PAL/ NTSC conversion

Standby with low power consumption

Clock adjustment

Excellent Performance

Fast Channel Change

Conversion between SD programs and HD programs

YPbPr Output: supporting 1080i

HDMI output: supporting 1080i

Digital Reception covers through VHF & UHF band

Wide screen 16:9 and normal 4:3 Aspect Ratio

Bandwidth of 6MHz & 7MHz & 8MHz Supported

TeleText / Bitmap subtitle, compliant with ETSI/EN300 472

S/P DIF (Digital Audio or Dolby AC3 Stream out)

RTC (Real Time Clock) Timer

65536 Color Graphic

8 Favorite Channel List

Channel Editing Capability (Move, Delete, complied Lock and etc.)

PVR Functions and Twin Tuner Function

Upgradeable up to 500GB HDD

Time shift (buffering): 1 Hours

Recording Time: up to 125 Hours (Depend on HDD)

Variable Forward Play Speed: 2, 4, 8, 16, 32，1/2, 1/4, 1/8

Variable Reverse Play Speed: 2, 4, 8, 16, 32, 1/2, 1/4, 1/8

Fast Schedule: Support Once/Daily/Weekly mode

Chase Play

Region Selection for Replay

Variable Combination of Watching and Recording Simultaneously

Live Watching or Recording + Live Watching or Recording or HDD Playback

Grouping for Cascade Playing

7

Assist Key to make operate more convenient

Particular tips to help you

3. Accessories

Please check the following accessories are enclosed

1 x User Manual

1 x Remote Control Unit

2 x AAA Batteries

1 x RF Male to RF Female Cross Cable

Note:

If any of the accessories listed above are missing, please contact the dealer where

this product was initially purchased.

4. General Operation of STB

Throughout this manual you will notice that the everyday operation of your STB is

based on a series of user friendly on screen display and menus. These menus will

help you get the most from your STB, guiding you through installation, channel

organizing, viewing and many other functions.

All functions can be carried out using the buttons on the remote control, and some of

the functions can also be carried out using the buttons on the front panel.

Should you experience any difficulties with the operation of your unit, please consult

the relevant section of this manual, including the Problem Shooting, or alternatively

call your dealer or a customer service adviser.

NOTE:

Please be aware that new software may change the functionality of the STB.

The photo and the function explanation involved in this specification are for

reference only. If there is any mistake, please refer to the entity.

8

OVERVIEW

1. Front Panel

NAME FUNCTION

STAND BY Switch between operation and standby modes

MENU Press to display the Main Menu on the screen

EXIT Press to return to the previous menu or escape from the

item

OK Connect to terrestrial antenna

When watching, change to the previous or next

channel, or move to the next higher or lower item in the

menu.

When watching a channel, adjust the volume or move to

the left or right item in the menu.

9

2. Rear Panel

NAME FUNCTION

2 LOOP OUT IF Loop through output to 2nd receiver

1 LOOP OUT IF Loop through output to 2nd receiver

2 ANT IN Connect to terrestrial antenna

1 ANT IN Connect to terrestrial antenna

R-AUDIO Right audio output

L-AUDIO Left audio output

CVBS Composite video output

S/P DIF Connect to TV for digital audio output

RS232 Serial port used for software upgrade

HDMI HDMI video output, supporting high definition output

YPbPr Component video output. Supports high definition

output

100-240V Power supply

ON/OFF Main power switch

10

3. Remote Control Unit

11

STB POWER: Press to turn on or off ( Standby)

MUTE: Press to temporarily cut off the sound

AUDIO: Press to switch the audio channel among the Left, Right and Stereo

modes

0-9 : Press to enter required numbers in the input box or select a channel to

watch

TEXT: Press to enter the teletext window

CC: Used to turn Closed Caption subtitles on or off

LAST: Returns to previous program.

INFO: Press to show information of the current channel

: Move cursor up/down/left/right, Page up/down, Volume +/-

OK: Press to execute the selected item in the menu, or to confirm the

desired value in input mode

MENU: Press to display the Main Menu on the screen

EPG: Press to display EPG (Electronic Program Guide) menu

FAV+/-: Press to display the FAV list

EXIT: Press to return to the previous menu or escape from the item

The List for PVR

LIST: Press to display the Recorded Program List.

PIP: Press to display the PIP window (Not available for this mode)

SWAP: Swap from main picture to sub-picture on PIP (Not available for this

mode).

PVR: Press to display the PVR Assist window.

FIRST: Change file playback position (backward).

SET MARK: Set the bookmark in playback process bar.

PLAY MARK: Press to jump to the next bookmark in playback process bar.

END: Change file playback position (Forward).

PLAY: Return to Normal Speed Playback from FF/FB/Slow/Paused mode.

PAUSE: Pause from live video or playback, and step when playback in Paused

mode.

12

STOP: Stop playback when playback or stop recording when recording.

RECORD:Record current service or set stop recording time when recording.

REW: Fast backward

F.F: Fast forward

SLOW: Press to slow at 1/2, 1/4, speed

TIMER RECORD: Short Cut to timer record.

Using the Learning Key:

The STB remote control is the one with four learning keys plus self-coding function.

The keys can be used for the STB remote control to function as any four keys of the

TV remote control by learning.

There are four learning keys that were highlighted with a white line on the remote

control. They are TV POWER key followed by 2 volume key (VOL+ & VOL-) at the

bottom and TV/AV key.

Users do not need to use the TV remote control while watching the digital TV

program after the STB remote control has learned to control the basic function of the

TV.

Instructions to use the STB remote control learning keys:

1. Press SET key for more than three seconds till the indicator light turns on.

2. Press a learning key that you wish to teach. The indicator light will flash until it

learns a signal.

3. Aim the TV remote control at the "receiving window" on the top of the STB remote

and press the key that you wish to teach.

4. The indicator light on the STB remote control will give three quick flashes to

indicate that it has received the signal.

5. Press the SET key on the remote and the learning key is ready to use.

6. When pressing keys on the “TV key” window of the STB remote control, the

indicator light will flash. It indicates that the STB remote control is to control the TV.

It is the same as the VOL+, VOL- and TV/AV keys.

13

Using the Info function:

The Info function will provide useful information about the current and next TV

program such as name, duration and description.

1. Press INFO key once to display the channel, name and duration of the current and

next TV program for a few seconds.

2. Press INFO key twice to display the description of the current TV program.

3. Press INFO key three times to display the description of the next TV program.

4. Press EXIT key to quit Info function.

14

4. Connection Diagram

A). Using RCA Cable

1). Connect the antenna to ANT IN of the STB.

2). Connect to TV by using RCA cable as following figure..

15

B). Connect YPbPr port

1). Connect the antenna to ANT IN of the STB.

2). Connect to TV as following figure..

16

OPERATION

In normal viewing mode, press the MENU key to display the main menu. Press the

EXIT key each time to exit each sub-menu until you are back to normal viewing

mode.

This menu consists of five menu items as shown below.

 Installation　

 Program Guide　

 Program Manage　

 Program Select　

 PVR　 Setting

 System Setting　

Use the navigation key to select an item and press OK key. The corresponding

sub-menu will be displayed

To escape the menu system at anytime, press EXIT on the REMOTE.

1. Installation

In Installation menu, user has two options to

search programs: Auto Search and Manual

Search. The Channel Edit determines what will

be searched in those two windows.

Page is loading ...

TEAC HDR1600T User manual

This manual is also suitable for

TEAC HDR1600T User manual

Related papers

Other documents