520 McCormick Drive, Suite F, Glen Burnie, MD 21061 Phone: 410 761-4000 Fax: 410 761-6274 www.polyplanar.com
Installation: Find a suitable location
making sure there is clearance for
the installed depth. Use a hole saw
or other suitable device to make a
cutout.
Attach speaker wires
supplied, solid color wire to positive
(red dot or with + sign or larger tab
as shown on the diagram).
Remove grill from frame of
speaker.
Swing plastic tabs(clamps)
to counterclockwise position.
Insert speaker in cutout
area and tighten the four stainless
steel crews located in the front panel
of the speaker.
2.60”
Mounting Depth
8.66” x 8.66”
Overall Size
Scale= 1:1
Reproduction may change
accuracy
7.32” x 7.32”
Cutout Size
MA7060
Speaker
Installation
Guide
/