Poly Planar PM2 Installation guide

1/8”

Hole Diameter

PM2 Installation Guide

Cutout and use as template for drilling

Installation: Find a suitable location making

sure there is clearance for the installed depth.

Use a hole saw or other suitable device to

make a cutout.

Place the unit in the cutout and mark and

drill holes for the mounting screws. If the

panel is too thin or soft for screws use a

stainless screw clips.

Scale= 1:1

Reproduction may change

accuracy

Mounting Depth

80mm

1352 Charwood Road • Suite D • Hanover, MD 21076 • Tel (410) 761-4000 • Fax (410) 761-6274 www.polyplanar.com

78.50mm

Cutout

154.5 mm

Cutout