Poly Planar SP200RG Installation guide

1352 Charwood Road • Suite D • Hanover, MD 21076 • Tel (410) 761-4000 • Fax (410) 761-6274 www.polyplanar.com

.312” (8mm)

4.520” (116mm)

Cutout

.585“(15mm)

SP200RG Rotating Popup Speaker

Cutout Template

5.200” (132mm)

Screw circle Dia.

Scale 1:1

Accuracy may vary when faxed or

otherwise duplicated

Overall diameter with trim ring

5.850” (150mm)

Installation: Find a suitable location making

sure there is clearance for the installed

depth. Use a hole saw or other suitable

device to make a cutout.

Place the speaker in the cutout and mark

and drill holes for the mounting screws. If the

panel is too thin or soft for screws use a

stainless screw clips.

Attach speaker wires supplied, solid color

wire to positive.

Installed depth from Flange

21.000” (533mm)

Includes 1” (25mm) clearance for wires