New England Arbors Va84062 Installation guide

New England Arbors
Brand
New England Arbors
Model
Va84062
Type
Installation guide

New England Arbors Va84062 is a trellis designed to mount onto the Bloomsbury Raised Planter Box (sold separately). It is made of durable materials and is easy to assemble. The trellis can be used to support climbing plants, such as roses, clematis, or ivy. It can also be used as a decorative element in your garden or patio.

New England Arbors Va84062 is a trellis designed to mount onto the Bloomsbury Raised Planter Box (sold separately). It is made of durable materials and is easy to assemble. The trellis can be used to support climbing plants, such as roses, clematis, or ivy. It can also be used as a decorative element in your garden or patio.

Check Box for These Contents
In the event of missing or defective parts please call our customer service department at
1 800 282 9346, ext #20
(Mon. to Fri. 8:00 AM to 4:00 PM EST).
1.
Posts
(2)
2.
Top and Bottom Rails (
2) -
1.5” x 1.5“ x 35.75”
3.
Horizontal Spindles
(3) - 1.5” x .875“ x 31”
4. Vertical Spindles
(5) - 1.5“ x .25” x 21“
5.
1” Self-Auguring Stainless Steel Screw
(4)
Tools You Will Need
• Cordless Drill
General Information
• Read Instructions through carefully before beginning assembly.
• When assembling components, place on a non-abrasive surface
(i.e. shipping box) to avoid scratching.
• We recommend an area approx 5’x 8’ for unobstructed assembling.
• You should not need to use excessive force when assembling component.
The Bloomsbury Trellis*
Please read through before starting assembly.
ASSEMBLY INSTRUCTIONS
1
IMPORTANT: CHECK THE INSIDE OF YOUR POSTS FOR ALL MATERIALS.
Ver 1.0 /Nov 2013
www.newenglandarbors.com
5
Not to Scale
1
2
4
3
*The Bloomsbury is designed to mount on to our Bloomsbury Raised Planter Box (sold separately) as shown above.
2
www.newenglandarbors.com
1
Align and insert the five vertical spindles into the horizontal
spindle as shown. Note the spacing between the horizontal
rails are to match that of the posts.
Align and insert the top and bottom rails as shown.
Insert the lattice from step 2 into the routed holes on the
posts as shown. Press down on each of the horizontal rails
to lock them into place.
1
2
3
4
STEP O NE
2
3
NOTE: There are locking tabs located at the ends of the
horizontal rails. Once inserted and pushed into the routed
holes, they will lock into place.
4
5
5
ST EP T W O
Insert the trellis from Step One above onto the Bloomsbury
Raised Planter Box as shown. Place the post caps from the
planter box onto the top of the trellis.
Secure the trellis into place using the four provided screws
at locations shown below:
www.newenglandarbors.com
3605 32nd St., Building 3, Port Huron MI USA 48060
Toll Free Phone: 1 800 282 9346 Toll Free Fax: 1 877 464 9286
  • Page 1 1
  • Page 2 2

New England Arbors Va84062 Installation guide

New England Arbors
Brand
New England Arbors
Model
Va84062
Type
Installation guide

New England Arbors Va84062 is a trellis designed to mount onto the Bloomsbury Raised Planter Box (sold separately). It is made of durable materials and is easy to assemble. The trellis can be used to support climbing plants, such as roses, clematis, or ivy. It can also be used as a decorative element in your garden or patio.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents