Intermetro LEC9800 Installation guide

Part No. INST-LEC9800

11/03

PART No. LEC9800

Assembly consists of (1) SHARPS Container Mounting Bracket, (2) Velcro Straps with

D Ring

1. For carts equipped with an Overbridge: Assemble the universal mounting bracket to the

overbridge with the instructions provided. Mount the Utility Pole to the bracket as shown in

Fig. 1.

2. For carts equipped with an I.V. Pole: Install the I.V. Pole with the instructions provided

3. For all units: Slide the bottom loop of the Sharps Container Bracket Loops over the flattened

area on the Utility or I.V. Pole, and then slide the bracket down as shown in Fig. 2. Do the same

with the top loop. (Bracket will rest on the universal mounting bracket for units with

overbridge (Fig. 3), or on the I.V. Pole adjustment knob for units with I.V. Pole Assembly (Fig.

4).

4. Install the (2) Velcro Straps to the Sharps Container Bracket as shown in Figs. 3 & 4. Install the

Sharps Container and adjust the Velcro straps as required.

Adjustable Sharps Container Bracket

INSTALLATION

INSTRUCTIONS

Fig. 1

Fig. 2

Fig. 3

Fig. 4

I.V.

Pole

Utility Pole

Overbrid

Universal

Mounting

Bracket

Velcro

Straps