rollease acmeda Zipscreen-Skylight Installation guide

Brand
rollease acmeda
Model
Zipscreen-Skylight
Type
Installation guide

Rollease acmeda Zipscreen-Skylight features a pre-tensioned spring roller system that offers superb tensioning to ensure a consistently flat fabric appearance. It sits within a head box with a discrete cassette fascia that conceals the shade’s components when retracted. The cassette fascia is pre-assembled and easy to install and service. The system is available as a manual or motorized option, and it can be controlled via a variety of methods, including a remote control, wall switch, or smartphone app.

Rollease acmeda Zipscreen-Skylight features a pre-tensioned spring roller system that offers superb tensioning to ensure a consistently flat fabric appearance. It sits within a head box with a discrete cassette fascia that conceals the shade’s components when retracted. The cassette fascia is pre-assembled and easy to install and service. The system is available as a manual or motorized option, and it can be controlled via a variety of methods, including a remote control, wall switch, or smartphone app.

November 2018
ZIPSCREEN-SKYLIGHT
INSTALLATION MANUAL
CONTENTS
DISCLAIMER
INTRODUCTION
This Installation manual for Zipscreen Skylight has been produced by Rollease Acmeda to supply the necessary information for the safe and correct installation of
Zipscreen Skylight.
DISCLAIMER
Rollease Acmeda has used reasonable care in preparing the information included in this document, but makes no representations or warranties as to the
completeness or accuracy of the information. Information is supplied upon the condition that the persons receiving the information will make their own
determination as to its suitability for their purposes prior to use. Rollease Acmeda assumes no liability whatsoever for any damages incurred by you resulting from
errors in or omissions from the information included herein. Rollease Acmeda reserves the right to make changes without further notice to any products to improve
reliability, function or design.
COPYRIGHT
COPYRIGHT © ROLLEASE ACMEDA
All rights are reserved. No part of this document may be reproduced or utilised in any means, by any means, electronic or mechanical including photocopying,
recordings, or by any information storage or retrieval system, without the express permission from Rollease Acmeda.
SECTION A: | ITEMS REQUIRED
01
ASSEMBLED PARTS ...................................................................................................................................01
SECTION B: | INSTALLATION
02
INSTALL BOXES ... ...............................................................................................................................................02
INSTALL SIDE CHANNELS ......................................................................................................................02
INSTALLING FABRIC/SPRING TUBE INTO BOX ...........................................................................................03
ZIPSCREEN | 60MM TUBE ......................................................................................................................04
ZIPSCREEN | 80MM TUBE ......................................................................................................................05
INSTALLING MOTOR/SPOOL TUBE INTO BOX ...........................................................................................06
INSTALLING INNER RAILS ......................................................................................................................07
ATTACHING PULL TAPE ...................................................................................................................................09
1.
2.
3.
4.
5.
6.
Page. 01
Zipscreen Skylight Installation Manual | November 2018
2018 ©Copyright All Rights Reserved Rollease Acmeda
SYSTEM INDEX:
1. Spring/Fabric Box
2. Motor/Spool Box
3. Spring/Fabric Tube
4. Motor/Spool Tube
5. U Channel
6. Inner Rails w/ Funnel End Caps
ASSEMBLED PARTS
SECTION A: | ITEMS REQUIRED
Page. 02 Zipscreen Skylight Installation Manual | November 2018
2018 ©Copyright All Rights Reserved Rollease Acmeda
INSTALL BOXES
INSTALL SIDE CHANNELS
STEP 1. FIX BOXES RELATIVE TO INSTALLATION SPACE
STEP 1. SLIDE UCHANNEL ONTO BOX EARS
STEP 2. LEVEL UCHANNEL AND FIX ALONG LENGTH
SECTION B: | INSTALLATION
NOTE: Ensure side guides are level
LEFT HAND SPRING LOCKED
L
Page. 03
Zipscreen Skylight Installation Manual | November 2018
2018 ©Copyright All Rights Reserved Rollease Acmeda
INSTALLING FABRIC/SPRING TUBE INTO BOX
STEP 1. LOCK SPRING HEAD AS SHOWN
STEP 2. ADD PRETURNS
REFER TO PRETENSION CHARTS FOR PRETURNS REQUIRED
Rollease Acmeda does not recommend exceeding suggested pre-turn values
SECTION B: | INSTALLATION
Pre-Turn Spanner available through Rollease Acmeda
Order Part #: RB10-9102-025008
NOTE: Count pre-turns when you hear audible clicks
WIDTH
DROP
19 19 19
0.60
20
20
0.80 19
12
12
10
2.20
2.40
2.60
2.80
3.00
20
20
m
0.80
1.00
1.20
1.40
1.60
1.80
2.00
20
20
20
20
20
20
20
20
20
20
0.60
19
19 19 19
2
20
20
20
20
20
20
20
20
20
1919 19 19 19 19 19
1919 19 19 19 19 19 19 1919 19 19 19 19 1919 19
18 18 18 18
19 1919 19 19 19 19 1919 19 19 19 1919
18
18
1818 18 18 18 18 1818 18 18 18 18 18
18
18
18
18
18
18
18
3
1.00
18 18 18 18 18 18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
18
17 17
18
18
18
18
18
18
18
18
18
18
18
18
17 1717 17 17 17 17 1717 17 17 17 17 171.20
17 17 17 17 17 1717 17 17 17
1.40 16
17 17 17
4
17 17 17 17
17 17 1717 17 17 17
17 17
16 16 16 16
16
16
16
16
16
16
16
16
16
16
16 16 1616 16 16 16 16 16
17 17 17 17
16
16
16
16
16
16
16 16 1616 16 1616 1616
5
1.60
15
15
15
15
16
16
16
16
16
16
16
15
15
15
15
15
15
15 15 15 15 15 15
14
15 15 15 15
15
15
15
15
15
15
15
15
15
15
15
14 14 14 14 14 141.80 14
15
15
15
15 15 15 15 15 15
14
15 15 15 15 15 15
6
14 14 14
14 14 14 1414 14 14 14 14 1414 14 14 14 14
1414 14 14 14 14 14
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
2.00
13
14 14 14 14 14 1414 14 14 14 14 14
13
13
13
13
13
13
13
13
7
2.20 12 12 12 12
13
13
13
13
13
13
13
13
13
13
13
12
13
12 12 12 12 12
13
13
13
13
12 12 1212 12 12 12 12 1212 12 12
13
13
13
12 12 12 12 1212 12 12 12 12 12
2.60
10
12 12
11 11 1111 11 11 11 11 11 11 11 11 1111 11 112.40 11
12
11
11
11
11
11
11
11
11
11
8
11
11
11
11
11
11
10
10
10
10
10
10
10
10
10
10
10
10
10
11
11
10 10 10 10 10 1010 10 10 10 10
10
99999
9
2.80 9999
9
10 10 10
99999
9999
3.00
9
999999 9
9
9
9
9
9
9
9
10
9
9
9
9
9
BOX 100BOX 120
ft
7
8
9
10
2
3
4
5
6
Page. 04 Zipscreen Skylight Installation Manual | November 2018
2018 ©Copyright All Rights Reserved Rollease Acmeda
LEGEND DESCRIPTION
Short Booster
EXTRA Heavy Booster
Pre-Turns Required
Cannot be achieved - outside product specifications
# #
SECTION B: | INSTALLATION
ZIPSCREEN | 60MM TUBE
PARAMETERS: FABRIC: 420GSM (12.4OZ/YD²), WEIGHT/HEM BAR: F72 HD
2.00
2.20
2.40
2.60
2.80
3.00
m
0.60
0.80
1.00
1.20
1.40
1.60
1.80
21
21
21
21
21
21
21
21
21
21
21
21
21
21
0.60
21
21
21
20 20
0.80 20 20 20 20 20
20 20
2
20 20 20 20 20
21
21
21
21
21
21
20 20 20 20 20 2020 20 20 20 20 20
BOX 120
20 20
20 20 20
20 20 20 20 20 2020 20 20 20 20 2020 20 20 20 20
20 20 20 2020 20 20 20 20 2020 20 20 20 20 20 20 20
20
19
19
19
19
19
19
19
19
3
1.00
19
19
19
19
19
20 20
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
19
18 1818 18 18 18 18 1818 18 18 18 18 181.20 18 18 18
19
19
19
19
19
19
19
19
19
19
19
19
18 18 18 18 18 18
4
18 18 18
18 1818 18 18 18
18 1818 18 18 18 18 1818 18 18 18 18 18
18 18 18 18 18 1818 18 18 18 18 181.40 18 18 18 18 18 18
17
17
17
17
17
17
17
17
17
17
17
17
17
17
18 18 18 18 18
17
17
5
1.60
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17 17 17 17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17
17 17 17 17 17 17 1717 17 17 17 17 1717 17 17 17 17 17
16 16 16 1616 16 16 16 16 161.80 16 16 16
16 16
6
16 16 16 16 16 16
16 1616 16 16 16 16 1616 16
16
16
16
2.00
16
16
16 16 16 16 1616 16 16
16
16
16
16
15
15
15
15
15
15
15
15
15
16 16 1616 16 16
16
16
14 14
15 15 15
16
16
16
16
16
16
16
16
16
15
15
15
15
15
15
16
16
16
16
2.20 15 15 15
15
15
15
15 15 15
2.40 14
7
15
15
15
15 15 15 15 15 15
15 15 1515 15 15
15 15 15 1515 15 15
15 15 15 1515 15 1515 15 15
14
14
14
14
14
14 1414 1414 14
14
14
14
14
14
14
14
14
14
14
14 14 14 14
14
14
14
14
814 14 14 14
14
13 13 1313 13 13 13 13 13
2.60
14
14
13 13 13 13 13 13
13 13
14
14
14
14
14
14
14
14
14
14
13 13 1313 13 13 13 13 13 13 13
9
2.80 13 13
13 1313 13
3.00
12
12
12
1313 13 13 1313
12
12
12
12
12
12
13
10
12
12
12
12
DROP
WIDTH
ft
8
9
10
2
3
4
5
6
7
Page. 05
Zipscreen Skylight Installation Manual | November 2018
2018 ©Copyright All Rights Reserved Rollease Acmeda
LEGEND DESCRIPTION
Box 120 | Short Booster
Box 120 | EXTRA Heavy Booster
Pre-Turns Required
Cannot be achieved - outside product specifications
# #
SECTION B: | INSTALLATION
ZIPSCREEN | 80MM TUBE
PARAMETERS: FABRIC: 420GSM (12.4OZ/YD²), WEIGHT/HEM BAR: F72 HD
Page. 06 Zipscreen Skylight Installation Manual | November 2018
2018 ©Copyright All Rights Reserved Rollease Acmeda
INSTALLING FABRIC/SPRING TUBE INTO BOX
INSTALLING MOTOR/SPOOL TUBE INTO BOX
STEP 3. INSTALL FABRIC/SPRING TUBE
Ensure idler shafts are correctly installed
STEP 1. INSTALL MOTOR HEAD ONTO MOTOR BRACKET
1.
1.
2.
SECTION B: | INSTALLATION
STEP 2. SWING IDLER END INTO BRACKET
NOTE: Ensure idler is correctly installed (See Section B, “Installing Fabric/Spring Tube Into Box”, Step 3)
Page. 07
Zipscreen Skylight Installation Manual | November 2018
2018 ©Copyright All Rights Reserved Rollease Acmeda
INSTALLING INNER RAILS
STEP 1. UNLOCK PRETENSION IDLER
SECTION B: | INSTALLATION
NOTE: Ensure apprx. 380mm (15”) of fabric is rolled off the tube before unlocking)
Rest end caps in U-Channel Shade should retract on its own
Pull weight bar out until click is
heard
i. ii. iii.
LEFT HAND SPRING UN-LOCKED
R
Page. 08 Zipscreen Skylight Installation Manual | November 2018
2018 ©Copyright All Rights Reserved Rollease Acmeda
INSTALLING INNER RAILS
STEP 2. INSTALL INNER RAILS AT FABRIC/SPRING END FIRST, THEN SWING IN
STEP 3. EXTEND AND HOLD OUT SHADE TO INSERT FUNNEL STOPS
SECTION B: | INSTALLATION
NOTE: Ensure zip engages into funnels/inner rail
Page. 09
Zipscreen Skylight Installation Manual | November 2018
2018 ©Copyright All Rights Reserved Rollease Acmeda
ATTACHING PULL TAPE
STEP 1. ATTACH PULL TAPE TO THE SPOOLS ON MOTOR TUBE
STEP 2. SLIDE SPOOL TOWARDS END PLATES UNTIL THE TAPE IS HIDDEN INSIDE THE
INNER RAIL
SECTION B: | INSTALLATION
NOTE: Ensure zip engages into funnels/inner rail
MAX
500mm
(20”)
A
[1/8"]
~3mm
[2"]
52mm
SAME ON BOTH SIDES
EVEN GAP EVEN GAP
C
ROLLEASE
ACMEDA
DIMENSIONS
IN "MM"
SCALE:1:2
SIZE:
A3
PROPRIETARY & CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE
WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED.
ITEM CODE:
PRODUCT SPECIFICATION SHEET
15 Mar 2018
DRAWN:
www.rolleaseacmeda.com
ITEM DESCRIPTION:
REV.
A
[1/8"]
~3mm
[2"]
52mm
SAME ON BOTH SIDES
EVEN GAP EVEN GAP
C
ROLLEASE
ACMEDA
DIMENSIONS
IN "MM"
SCALE:1:2
SIZE:
A3
PROPRIETARY & CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE
WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED.
ITEM CODE:
PRODUCT SPECIFICATION SHEET
15 Mar 2018
DRAWN:
www.rolleaseacmeda.com
ITEM DESCRIPTION:
REV.
Page. 10 Zipscreen Skylight Installation Manual | November 2018
2018 ©Copyright All Rights Reserved Rollease Acmeda
FIXING INNER RAILS
SECTION B: | INSTALLATION
STEP 1. ENSURE WEIGHT BAR & SIDE CHANNELS ARE CENTRALIZED
STEP 2. FIX INNER RAIL WITH FABRIC FULLY RETRACTED. BEFORE FIXING, CENTRALIZE THE
SHADE BY APPLYING LIGHT FORCE ONTO THE INNER RAILS.
Screws OR Rivets can be used based on installation requirements
STEP 3. FIX INNER RAIL WITH FABRIC 500MM [20”] FROM 1ST FIXING POINT, REPEAT AT
500MM [20”] SPACINGS OR LESS
Screws OR Rivets can be used based on installation requirements
A
A
B
SECTION A-A
[3/8"]
10mm
[3/4"]
20mm
DETAIL B
SCALE 2 : 1
C
ROLLEASE
ACMEDA
DIMENSIONS
IN "MM"
SCALE:1:10
SIZE:
A3
PROPRIETARY & CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF
ROLLEASE ACMEDA. ANY REPRODUCTION IN PART OR WHOLE WITHOUT THE
WRITTEN PERMISSION OF ROLLEASE ACMEDA IS PROHIBITED.
ITEM CODE:
PRODUCT SPECIFICATION SHEET
14 Mar 2018
DRAWN:
www.rolleaseacmeda.com
ITEM DESCRIPTION:
REV.
Page. 11
Zipscreen Skylight Installation Manual | November 2018
2018 ©Copyright All Rights Reserved Rollease Acmeda
TESTING SKYLIGHT
INSTALLING BOX COVERS
SECTION B: | INSTALLATION
STEP 1. SET MOTOR LIMITS AND TEST OPERATION
STEP 1. SWING BOX COVERS INTO PLACE
STEP 2. FIX INTO PLACE WITH SCREW OR RIVET
HOLE LOCATIONS X4
NOTE:
It is recommended that the Box covers are fixed in place to
ensure they can not be accidentally dislodged.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13

rollease acmeda Zipscreen-Skylight Installation guide

Brand
rollease acmeda
Model
Zipscreen-Skylight
Type
Installation guide

Rollease acmeda Zipscreen-Skylight features a pre-tensioned spring roller system that offers superb tensioning to ensure a consistently flat fabric appearance. It sits within a head box with a discrete cassette fascia that conceals the shade’s components when retracted. The cassette fascia is pre-assembled and easy to install and service. The system is available as a manual or motorized option, and it can be controlled via a variety of methods, including a remote control, wall switch, or smartphone app.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents