BEA LZR-WIDESCAN Adapter Kit User guide

Type
User guide

This manual is also suitable for

LZR®-WIDESCAN ADAPTER KIT
KIT COMPONENTS
DESCRIPTION
75.5939.02 LZR-WIDESCAN ADAPTER KIT 20230401 Page 1 of 2
ENGLISH
Kit used to ensure compatibility between the LZR®-WIDESCAN and
BEAs Industrial or Mini Industrial Brackets
If an industrial bracket (10INDBRACKET or 10MINIBRACKET) are required for the desired
application, the LZR®-WIDESCAN ADAPTER KIT must be used in conjunction for compatible
mounting.
See below for proper mounting sequence.
x5
ADAPTER PLATE
SCREWS (10-24)
10INDBRACKET
10MINIBRACKET
MOUNT BRACKET
INSTALL ADAPTER PLATE
PREPARE INDUSTRIAL BRACKET
2
3
1
75.5799.03 INDUSTRIAL BRACKETS 20160216 Page 1 of 2
INDUSTRIAL BRACKET
Universal industrial mounting bracket
ENGLISH
1. 12’’ x 2.5’’ mounting face (fasteners not included)
2. adjustment locking screws
3. extendable adjustment
4. sensor mounting face
1
2
3
4
TECHNICAL SPECIFICATIONS
DESCRIPTION
Material: Carbon Steel (powder coated black)
Adjustment: 20-36 inches
Weight: 5.38 lbs
Specifications are subje ct to changes without pr ior notice.
All values measured in speci fic conditions.
5. IXIO / Wizard / Iris
6. DK12
7. Eagle HM
24/7 Tech Support: 1-800-407-4545 | Customer Service: 1-800-523-2462 | General Tech Questions: T[email protected] | Tech Docs: www.beasensors.com
8. wire passage hole
9. Falcon / IS40 / IS40P
10. LZR family
5 6 7 8 9 10 6. IXIO
7. Eagle HM
8. Falcon / IS40 / IS40P
9. LZR - microscan (centered mounting)
75.5799.03 INDUSTRIAL BRACKETS 20160216 Page 2 of 2
Short universal industrial mounting bracket
ENGLISH
1. 12’’ x 2.5’’ mounting face (fasteners not included)
2. adjustment locking screws
3. extendable adjustment
4. sensor mounting face
5. angle locking bolt
1
2
3
4
TECHNICAL SPECIFICATIONS
DESCRIPTION
Material: Carbon Steel (powder coated black)
Adjustment: 6-12 inches (up to 4 inches maybe cut off for shorter application)
Adjustment tool: 5/16 Allen Wrench
Weight: 2.32 lbs
24/7 Tech Support: 1-800-407-4545 | Customer Service: 1-800-523-2462 | General Tech Questions: T[email protected] | Tech Docs: www.beasensors.com
6 8
7 9
5
10. LZR - microscan (right mounting)
11. LZR - microscan (left mounting)
12. LZR family *
13. wire passage hole
Specifications are subje ct to changes without pr ior notice.
All values measured in speci fic conditions
11
10
12
*Mutiple mounting options available refer to LZR mounting template
13
MINI INDUSTRIAL BRACKET
©BEA | 75.5939.02 LZR-WIDESCAN ADAPTER KIT 20230401
Tech Support & Customer Service: 1-800-523-2462
General Tech Questions: [email protected] | Tech Docs: www.BEAsensors.com
75.5939.02 LZR-WIDESCAN ADAPTER KIT 20230401 Page 2 of 2
Refer to User’s Guide 75.5799 for instructions on mounting
the Industrial Bracket or Mini Industrial Bracket.
Using the diagram to the right, position the adapter on the
Industrial Bracket plate. Secure with provided screws.
When the Adapter Plate has been secured to the Industrial
Bracket, proceed with sensor mounting instructions in User’s
Guide 75.5916 or Quick-Start Guide 75.5917.
Holes on the existing bracket plates must be enlarged to 732" diameter to fit the Adapter plate.
See below for identified holes to enlarge. Red circles are strictly for identifying purposes, not size indication.
INDUSTRIAL BRACKET: Drill to 732" diameter
MINI INDUSTRIAL BRACKET: Drill to 732" diameter
PLEASE KEEP FOR FURTHER USE – DESIGNED FOR COLOR PRINTING
| Original Instructions
  • Page 1 1
  • Page 2 2

BEA LZR-WIDESCAN Adapter Kit User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI