LAZER FORD RANGER XLT 2023 User manual

FORD RANGER XLT 2023
LAZER
Brand
LAZER
Model
FORD RANGER XLT 2023
Type
User manual

LAZER FORD RANGER XLT 2023 Grille Integration Kit provides a seamless and stylish mounting solution for your vehicle's grille, allowing for the integration of two high-performance LED spotlights (Triple-R 850) with triple-R technology, delivering exceptional visibility and illumination. The kit includes anti-theft fasteners and a key for added security, ensuring your investment remains safe. Installation instructions are provided for a straightforward and hassle-free setup without removing the grille from the vehicle.

LAZER FORD RANGER XLT 2023 Grille Integration Kit provides a seamless and stylish mounting solution for your vehicle's grille, allowing for the integration of two high-performance LED spotlights (Triple-R 850) with triple-R technology, delivering exceptional visibility and illumination. The kit includes anti-theft fasteners and a key for added security, ensuring your investment remains safe. Installation instructions are provided for a straightforward and hassle-free setup without removing the grille from the vehicle.

FITTING INSTRUCTIONS
ALSO AVAILABLE
FORD TRANSIT 2019+
GRILLE INTEGRATION KIT
ISUZU D-MAX 2021+
GRILLE INTEGRATION KIT
FORD RANGER 2019+
GRILLE INTEGRATION KIT
TOYOTA HILUX 2021+
GRILLE INTEGRATION KIT
FORD TRANSIT CUSTOM 2018+
GRILLE INTEGRATION KIT
RAM 1500 2019+
GRILLE INTEGRATION KIT
FORD RANGER XLT 2023+
GRILLE INTEGRATION KIT
074
FORD RANGER RAPTOR 2018+
GRILLE INTEGRATION KIT
FORD RANGER / RAPTOR
ROOF MOUNTING KITS MADE IN THE UK /LAZERLAMPS /LAZERLAMPS
WHATS’S INCLUDED
TOOLS REQUIRED
• 4x Grille Mounting Brackets
• 4x Cutter Guides
• Anti-Theft Fasteners & Key
• Fitting Instructions
Additionally - Kit Includes:
• 2x High Performance LED Spotlights (Triple-R 850)
• 1x Two-Lamp Wiring Kit
WWW.LAZERLAMPS.COM
+44 (0)1992 677374
sales@lazerlamps.com
Lazer Lamps Ltd, Units 1&2 Harlow Mill Business Centre,
Riverway, Harlow, Essex. CM20 2FD. United Kingdom
EN Lamps with integrated Position light may need to be positioned according to the above
sketch. If an additional pair of position lights is not permitted (e.g. in Switzerland, Austria),
the position light should be disconnected. The legal regulations in individual countries
must be observed.
FR Lors du montage d’un phare de complement avec feu de position intégré, toutes les
cotes de montage supplémentaires indiquées dans le croquis ci-dessus doivent être re-
spectées. Si ces spécications de montage légales ne sont pas respectées, ou si l’utilisa-
tion d’une paire supplémentaire de feux de position n’est pas autorisée (Suisse, Autriche),
le feu de position ne doit pas être utilisé. Dans ce cas, les cables du feu de position doivent
être débranchés. La législation spécique à chaque pays doit être observée.
DE Bei Anbau eines Zusatzscheinwerfers mit integriertem Positionslicht sind in
Deutschland alle in nebenstehender Skizze aufgefuehrten zusaetzlichen Anbaumaße
einzuhalten. Solten diese gesetzlichen Anbauvorschriften nicht eingehalten werden, bzw.
die Benutzungeines zusaetzlichen Paares Positionsleuchten nicht zulaessig sein (CH, A)
darf das Positionslicht nicht betrieben werden. Landesspezische Gesetzeslage ist zu
beachten.
NO Lamper med posisjonslys / parklys må muligens plasseres ifølge tegningen over. NB: i
Norge er det kun lov med to parklys totalt.
SE Lampor med integrerat positionsljus rekommenderas att placeras enligt ovanstående
skiss. Om det inte är tillåtet med ytterligare ett par positionsljus på fordonet (t.ex. i Schweiz,
Österrike), bör positionsljuset kopplas bort. Lagstiftningen ska följas enligt varje enskilt
land.
FI Parkkivaloilla varustetut mallit tulee asemoida yllä olevan piirroksen mukaisesti. Mikäli
parkkivalot eivät ole maakohtaisesti (mm. Sveitsi, Itävalta) laillisia tieliikenteeseen, ei niitä
tule kytkeä käyttöön. Maakohtaisia liikennelain asetuksia tulee aina noudattaa.
FITTING INFORMATION
SIDE MOUNTING INFORMATION
Ø3.5mm
+
4
CAN
HI
BATT
+VE
BATT
-VE
CAN
LO
CANCCR-LZR
(SOLD SEPERATELY)
CAN-LZR
(SOLD SEPERATELY)
CONNECT TO MATCHING
WIRES ON THE LAZER
WIRING HARNESS
CAN
HI CAN
LO
For vehicles where it is not possible to locate a 12V
high beam signal, it will be necessary to take the high
beam signal from the vehicle’s CAN system. For
vehicle specic CAN instructions, please download the
“CANM8 Cannect” App.
CANBUS INTEGRATION
GREEN WIRE BROWN WIRE
12
‘CLICK‘
4
3
TRIPLE-R - POSITION LIGHT FUNCTION (OPTIONAL)
ELECTRICAL CONNECTION
TRIPLE-R 850 STANDARD
TRIPLE-R 850 ELITE
1
2
3
4
TORQUE VALUES
5
6
7
Ø3.5mm
INSTALLATION
PROCESS
89
74LHIB
Install should be
completed with the
grille left on the
vehicle.
1
13
3
2
2
4
4
1
2
INFORMATION FOR CUTTING GUIDES 1 & 4
BATTERY (-VE)
BATTERY (+VE)
SWITCH
(Ø20MM)
20A
87
86
85
30
CAN-LZR
12V RELAY
IGN
SWITCH CAN BE
REMOVED IF
DESIRED
(CAN-LZR SOLD SEPERATELY)
5mm
BATTERY (-VE)
BATTERY (+VE) 20A
(CAN-LZR SOLD SEPERATELY)
CAN-LZR
SWITCH - OPTIONAL
(Ø20MM)
87
86
85
30
12V RELAY
2
CODE: LHIB
TORQUE: 8 Nm CODE: RHIB
TORQUE: 8 Nm
CODE: RHOB
TORQUE: 3 Nm
CODE: LHOB
TORQUE: 3 Nm
  • Page 1 1
  • Page 2 2

LAZER FORD RANGER XLT 2023 User manual

FORD RANGER XLT 2023
LAZER
Brand
LAZER
Model
FORD RANGER XLT 2023
Type
User manual

LAZER FORD RANGER XLT 2023 Grille Integration Kit provides a seamless and stylish mounting solution for your vehicle's grille, allowing for the integration of two high-performance LED spotlights (Triple-R 850) with triple-R technology, delivering exceptional visibility and illumination. The kit includes anti-theft fasteners and a key for added security, ensuring your investment remains safe. Installation instructions are provided for a straightforward and hassle-free setup without removing the grille from the vehicle.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents